journal article·2016-07

Analysis on Calcination Process of WC–Co Precursor Powder

Qiumin Yang, Jiangao Yang, Jianming Ruan, Jie Wu, Guohua Ni, Tangzhe Ouyang

Powder Metallurgy and Metal Ceramics· Volume 55· Issue 3-4
Publisher page

Abstract

In this paper, calcination of WC–Co precursor powders with different Co contents prepared by solution technique was investigated. Thermal analysis was carried out. The precursor powders after calcination process were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). A mechanism of calcination of the precursor powder was proposed and substantiated by the experimental data. The mechanism was that carbon in Sample C (WC–3 wt.% Co) after calcination was provided only by the pyrolysis of soluble starch, while carbon in Sample A (WC–12 wt.% Co) was provided not only by the pyrolysis of soluble starch but also by the pyrolysis of methyl in acetate cobalt. The main phase after calcination was the mixture of WO3, CoO, and C. Moreover, ultrafine WC–Co composite powder was obtained after fast reduction–carbonization treatment. The morphology of WC–Co powder is hollow spherical granular structure where individual particles are cemented in the form of agglomerated ball and the mean particle size is 177 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Wei-Hsio Chen, Pramoda K. Nayak, Hao-TungLin, et al., “Synthesis of nanostructured tungsten carbide via metal-organic chemical vapor deposition and carbonization process,” Int. J. Refract. Met. Hard Mater., 47, 44–48 (2014).
2. S. Norgren, J. García, A. Blomqvist, and L. Yin, “Trends in the P/M hard metal industry,” Int. J. Refract. Met. Hard Mater., 48, 31–45 (2015).10.1016/j.ijrmhm.2014.07.007 ↗
3. I. Konyashina and L. I. Klyachko, “History of cemented carbides in the Soviet Union,” Int. J. Refract. Met. Hard Mater., 49, 9–26 (2015).10.1016/j.ijrmhm.2014.08.011 ↗
4. Cheong-Song Choi, Jun-Hyung Kim, and Choul-Ho Lee, “Crystallization of high purity ammonium metatungstate for production of ultrapure tungsten metal,” Korean J. Chem. Eng., 17, 643–648 (2000).10.1007/BF02699111 ↗
5. Z. Z. Fang, X. Wang, T. Ryu, et al., “Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide—a review,” Int. J. Refract. Met. Hard Mater., 27, 288–299 (2009).10.1016/j.ijrmhm.2008.07.011 ↗
6. K. Jia and T. E. Fischer, “Abrasion resistance of nanostructured and conventional cemented carbides,” Wear, 200, 206–214 (1996).10.1016/S0043-1648(96)07277-8 ↗
7. Gourav Singla, K. Singh, and O. P. Pandey, “Structural and thermal analysis of in situ synthesized C–WC nanocomposites,” Ceram. Int., 40, 5157–5164 (2014).10.1016/j.ceramint.2013.10.067 ↗
8. Hua Lin, Bowan Tao, Jie Xiong, et al., “Tungsten carbide (WC) nanopowders synthesized via novel core–shell structured precursors,” Ceram. Int., 39, 2877–2881 (2013).10.1016/j.ceramint.2012.09.061 ↗
9. Jelena Lukovic, Biljana Babic, Dušan Bucevac, et al., “Synthesis and characterization of tungsten carbide fine powders,” Ceram. Int., 41, 1271–1277 (2014).10.1016/j.ceramint.2014.09.057 ↗
10. L. Volpe and M. Boudart, “Compounds of molybdenum and tungsten with high specific surface area,” J. Solid State Chem., 59, 332–347 (1985).10.1016/0022-4596(85)90301-9 ↗
11. K. Madhav Reddy, T. N. Rao, and J. Joardar, “Stability of nanostructured W–C phases during carbonization of WO3,” Mater. Chem. Phys., 128, 121–126 (2011).10.1016/j.matchemphys.2011.02.045 ↗
12. Yongzhong Jin, Bin Huang, Chunhai Liu, and Qingshan Fu, “Phase evolution in the synthesis of WC–Co–Cr3C2–VC nanocomposite powders from precursors,” Int. J. Refract. Met. Hard Mater., 41, 169–173 (2013).10.1016/j.ijrmhm.2013.03.007 ↗
13. B. H. Kear and P. R. Strutt, “Chemical processing and applications for nanostructured materials,” Nanostruct. Mater., 6, 227–236 (1995).10.1016/0965-9773(95)00046-1 ↗
14. G. S. Upadhyaya, Cemented Tungsten Carbides: Production, Properties, and Testing, Noyes Publications, Westwood, New Jersey, USA (1998).
15. F. L. Zhang, C. Y. Wang, and M. Zhu, “Nanostructured WC/Co composite powder prepared by high energy ball milling,” Scr. Mater., 49, 1123–1128 (2003).10.1016/j.scriptamat.2003.08.009 ↗
16. M. Abdellahi, H. Bahmanpour, and M. Bahmanpour, “The best conditions for minimizing the synthesis time of nanocomposites during high energy ball milling: Modeling and optimizing,” Ceram. Int., 40, 9675–9692 (2014).10.1016/j.ceramint.2014.02.049 ↗
17. J. C. Kim and B. K. Kim, “Synthesis of nanosized ultrafine tungsten carbide powder by the chemical vapor condensation process,” Scr. Mater., 50, 969–972 (2004).10.1016/j.scriptamat.2004.01.015 ↗
18. Wenbin Liu, Xiaoyan Song, Jiuxing Zhang, Fuxing Yin, and Guozhen Zhang, “A novel route to prepare ultrafine-grained WC–Co cemented carbides,” J. Alloys Compd., 458, 366–371 (2008).10.1016/j.jallcom.2007.03.107 ↗
19. Z. G. Ban and L. L. Shaw, “On the reaction sequence of WC–Co formation using an integrated mechanical and thermal activation process,” Acta Mater., 49, 2933–2939 (2001).10.1016/S1359-6454(01)00209-9 ↗
20. Z. G. Ban and L. L. Shaw, “Synthesis and processing of nanostructured WC–Co materials,” J. Mater. Sci., 37, 3397–3403 (2002).10.1023/A:1016553426227 ↗
21. G. H. Lee and S. Kang, “Synthesis of nanosized WC–Co powders by reduction–carbonization process,” Metall. Trans. B, 42, 1575–1581 (2001).
22. M. I. Dvorni and A. V. Zaytsev, “Research of surfaces and interfaces increasing during planetary ball milling of nanostructured tungsten carbide/cobalt powder,” Int. J. Refract. Met. Hard Mater., 36, 271–277 (2013).10.1016/j.ijrmhm.2012.10.004 ↗
23. S. A. Hewitt, T. Laoui, and K. K. Kibble, “Effect of milling temperature on the synthesis and consolidation of nanocomposite WC–10Co powders,” Int. J. Refract. Met. Hard Mater., 27, 66–73 (2009).10.1016/j.ijrmhm.2008.03.007 ↗
24. A. Kumar, K. Singh, and O. P. Pandey, “Optimization of processing parameters for the synthesis of tungsten carbide (WC) nanoparticles through solvothermal route,” Physica E, 42, 2477–2483 (2010).10.1016/j.physe.2010.06.002 ↗
25. Hua Lin, Bo-Wan Tao, Jie Xiong, and Qing Li, “Synthesis and characterization of WC–VC–Co nanocomposite powders through thermal processing of a core–shell precursor,” Ceram. Int., 39, 9671–9675 (2013).10.1016/j.ceramint.2013.05.092 ↗
26. Yi Zhonglai, Shao Gangqin, Duan Xinglong, et al., “Preparation of WC–Co powder by direct reduction and carbonization,” China Particuology, 3, 286–288 (2005).10.1016/S1672-2515(07)60203-6 ↗
27. W. D. Schubert and E. Lassner, “Production and characterization of hydrogen-reduced submicron tungsten powders. Part II: Controlled decomposition of APT and hydrogen reduction of the oxides,” Int. J. Refract. Met. Hard Mater., 10, 171–183 (1991).10.1016/0263-4368(91)90031-I ↗
28. Dean S. Venables and Michael E. Brown, “Reduction of tungsten oxides with hydrogen and carbon,” Thermochim. Acta, 285, 361–382 (1996).10.1016/0040-6031(96)02951-6 ↗
29. L. Gao and B. H. Kear, “Low temperature carbonization of high surface area tungsten powders,” Nanostruct. Mater., 5, 555–569 (1995).10.1016/0965-9773(95)00265-G ↗
30. K. Madhav Reddy, T. N. Rao, K. Radha, and J. Joardar, “Nanostructured tungsten carbides by thermochemical processing,” J. Alloys Compd., 494, 404–409 (2010).10.1016/j.jallcom.2010.01.059 ↗
31. V. Bonache, M. D. Salvador, D. Busquets, et al., “Synthesis and processing of nanocrystalline tungsten carbide: Towards cemented carbides with optimal mechanical properties,” Int. J. Refract. Met. Hard Mater., 29, 78–84 (2011).10.1016/j.ijrmhm.2010.08.003 ↗
32. 32. L. E. McCandish, B. H. Keer, and S. Bhatia, Spray Conversion Process for the Production of Nanophase Composite Powders, International Patent WO91/07244 (1991).
33. L. Gao and B. H. Kear, “Synthesis of nanophase WC powder by a displacement reaction process,” Nanostruct. Mater., 9, 205–208 (1997).10.1016/S0965-9773(97)00054-8 ↗
34. A. O. Kalpakli, A. Arabaci, C. Kahruman, and I. Yusufoglu, “Thermal decomposition of ammonium paratungstate hydrate in air and inert gas atmospheres,” Int. J. Refract. Met. Hard Mater., 37, 106–116 (2013).10.1016/j.ijrmhm.2012.11.004 ↗
35. S. Majumdar, I. G. Sharma, A. C. Bidaye, and A. K. Sur, “A study on isothermal kinetics of thermal decomposition of cobalt oxalate to cobalt,” Thermochim. Acta, 473, 45–49 (2008).10.1016/j.tca.2008.04.005 ↗
36. G. J. French and F. R. Sale, “A reinvestigation of the thermal decomposition of ammonium paratungstate,” J. Mater. Sci., 16, 3427–3436 (1981).10.1007/BF00586305 ↗
37. M. J. G. Faita, H.-J. Lunk, M. Feist, et al., “Thermal decomposition of ammonium paratungstate tetrahydrate under nonreducing conditions. Characterization by thermal analysis, X-ray diffraction, and spectroscopic methods,” Thermochim. Acta, 469, 12–22 (2008).10.1016/j.tca.2007.12.007 ↗
38. Nasr E. Fouad, Ahmed K. H. Nohman, and Mohamed I. Zaki, “Spectro-thermal investigation of the decomposition intermediates developed throughout reduction of ammonium paratungstate,” Thermochim. Acta, 343, 139–143 (2000).10.1016/S0040-6031(99)00339-1 ↗
39. A. Lofberg, A. Frennet, G. Leclercq, et al., “Mechanism of WO3 reduction and carburization in CH4/H2 mixtures leading to bulk tungsten carbide powder catalysts,” J. Catal., 189, 170–183 (2000).10.1006/jcat.1999.2692 ↗
40. D. Dolliaiore, “The thermal decomposition of oxalates. A review,” Thermochim. Acta, 117, 331–363 (1987).10.1016/0040-6031(87)88127-3 ↗