journal article·2015-11

Effect of the Deposition Conditions on the Formation of the Microstructure and Properties of (Ti, Zr)N Coating on Chromium Carbide Steels

V. A. Maslyuk, Ya. A. Sytnik, I. I. Bilyk, V. T. Varchenko

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 7-8
Publisher page

Abstract

A complex nitride (Ti, Zr)N coating on chromium carbide steels Kh13M2–30 vol.% Cr 3 C 2 and Kh17N2–30 vol.% Cr 3 C 2 is obtained. The optimal deposition conditions are determined. The effect of deposition time on the hardness, structure, adhesion strength, and wear resistance of coatings during sliding friction (counterface—steel ShKh15) is investigated. It is established that annealing at 900–1200°C promotes an active interaction of the coating elements with the substrate accompanied by the formation of a transition zone. It is found that the (Ti, Zr)N coatings produced at nitrogen pressure P = 2 Pa, spray-off distance d = 230 mm, and deposition time 30–40 min possess the best mechanical and tribotechnical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. I. P. Tretyakov and A. S. Vereshchaka, Cutting Tools with Wear-Resistant Coatings [in Russian], Mashinostroenie, Moscow (1986) p. 423.
2. V. N. Antsiferov and B. S. Mitin (Ed.), Powder Metallurgy and Deposited Coatings [in Russian], Metallurgiya, Moscow (1987), p. 791.
3. O. M. Dubovyi and A. M. Stepanchuk, Coating Technology [in Ukrainian], Nats. Univer. Korablebud., Mykolaiv (2007) p. 236.
4. V. M. Khoroshikh, “Stationary vacuum arc in technological systems for surface treatment,” Fiz. Ingener. Poverkhn., 1, No. 1, 19–26 (2003).
5. A. S. Vereshchaka, A. A. Vereshchaka, and A. I. Grabchenko (Ed.), The Trend of Improvement and Methodology for Creating Functional Coatings for Cutting Tool. Modern Technologies in Mechanical Engineering [in Russian], Nats. Tekh. Univer. “Khar. Politech. Inst.,” Kharkov (2007), pp. 192–235.
6. A. N. Panckow, J. Steffenhagen, D. Wegener, et al., “Application of novel vacuum-arc ion-plating technologies for the design of advanced wear-resistant coatings,” Surf. Coat. Technol., 138, 71–76 (2001).10.1016/S0257-8972(00)01150-6 ↗
7. R. V. Yakovenko, V. A. Maslyuk, G. A. Baglyuk, and A. E. Kushchevskii, “Effect of production technique on the structure and properties of carbide steel with additives of chromium carbide,” Vist. Skhidnoukr. Univer. V. Dal’, No. 10, 281–284 (2010).
8. V. M. Anishchik, V. V. Uglov, S. V. Zlotskii, et al., “TiN/ZrN multilayer nanostructured coatings: structure and mechanical properties,” Perspect. Mater., No. 4, 75–78 (2003).