Friction and Wear of Porous Sliding Bearings at High Temperature. Influence of MoS2 Nanoparticle Solid Lubricant
Source abstract
Abstract
The paper is devoted to analysis of friction and wear of real porous sliding bearings modified with solid lubricant layers at high temperature. For this purpose, a special homemade friction tester was applied. The technology of sleeve nitriding is described. The results of the friction tests reveal about the achievement of quasi-hydrodynamic lubrication regime of powder bearings. The lowest friction coefficient is found to be f = 0.04 at 300°C. The great effect of wear rate diminishing is obtained at 300°C as interaction of microasperities is preserved at the sliding interface in quasi-hydrodynamic lubrication regime.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. H. Heshmat, “The quasi-hydrodynamic mechanism of powder lubrication: part II—lubricant film pressure profile,” Lubr. Eng., 48, 373–383 (1992).
2. L. Zhou and M. M. Khonsari, “Flow characteristics of a powder lubricant sheared between parallel plates,” ASME J. Tribol., 122, 147–151 (2000).10.1115/1.555337 ↗
3. K. T. McKeague and M. M. Khonsari, “An analysis of powder lubricated slider bearings,” ASME J. Tribol., 118, 206–214 (1996).10.1115/1.2837080 ↗
4. M. Pappur and M. M. Khonsari, “Flow characterization and performance of a powder lubricated slider bearing,” J. Tribol., 125, 135–144 (2003).10.1115/1.1467634 ↗
5. H. Weinert and V. Leshchynsky, “New nanostructured self-lubricated materials made by powder metallurgy (review),” Ann. Chim. Sci. Mat., 32, No. 4, 345–357 (2007).10.3166/acsm.32.345-357 ↗
6. H. Weinert, “Exfoliation based technology of large scale manufacturing molybdenum disulphide graphenelike nanoparticle mixtures,” Arch. Metall. Mat. , in press (2013).
7. S. D. de Souza, M. Olzon-Dionysio, E. J. Miola, and C. O. Paiva-Santos, “Plasma nitriding of sintered AISI 316 L at several temperatures,” Surf. Coat. Technol., 184, 176–181 (2004).10.1016/j.surfcoat.2003.11.007 ↗
8. K. N. Elkholy and M. M. Khonsari, “Granular collision lubrication: experimental investigation and comparison to theory,” J. Tribol., 129, 923–932 (2007).10.1115/1.2768613 ↗
9. R. Tenne, L. Margulis, M. Genut, and G. Hodes, “Polyhedral and cylindrical structures of tungsten disulphide,” Nature, 360, 444 (1992).10.1038/360444a0 ↗