Structure and Mechanical Properties of Titanium-Based Composites and Secondary Films Synthesized during Friction
Source abstract
Abstract
The structural state and mechanical characteristics of titanium-based composites and secondary lubricating films synthesized on their surface during dry friction are studied. It is found that secondary lubricating films with microheterogeneous and nanocrystalline (grain size <100 nm) structure are synthesized on the materials whose friction coefficient varies between 0.3–0.36 and wear between 1.91–68.3 mg/km at a high slip velocity (15 m/sec) and low pressure (0.8 MPa). These films determine the antifriction properties and performance of the materials. The mechanical characteristics of secondary lubricating films are higher than those of the composites. The antifriction properties can be evaluated from the ratio of the mechanical characteristics of the secondary lubricating films and the starting material: the smaller the ratio, the higher the antifriction properties of the composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. G. I. Kapyrin (ed.), Titanium Alloys in Mechanical Engineering [in Russian], Mashinostroenie, Leningrad (1977), p. 248.
2. I. S. Katyug and V. I. Svitsikov, “Some tests of titanium and its alloys for friction and wear,” Sudostroenie, No. 8, 46–48 (1958).
3. I. M. Fedorchenko and L. I. Pugina, Sintered Antifriction Composite Materials [in Russian], Naukova Dumka, Kiev (1980), p. 440.
4. A. G. Kostornov, O. I. Fushchich, T. M. Chevychelova, et al., “Prospects of improving the tribotechnical characteristics of titanium composites,” Powder Metall. Met. Ceram., 51, No. 11–12, 687–696 (2012).
5. Antifriction Powder Materials. A Method of Determining the Tribotechnical Properties [in Russian], GOST 26614–85, Gosstandart, Moscow (1985), p. 9.
6. S. A. Firstov, V. F. Gorban’, E. P. Pechkovskii, and N. A. Mameka, “Indentation equation,” Dop. Akad. Nauk Ukrainy, No. 12, 100–106 (2007).
7. V. F. Gorban’, “Properties of secondary structures on metals and coatings,” Metallofiz. Noveish. Tekhnol., No. 11, 1527–1535 (2007).
8. V. F. Gorban’, “Instrumental indentation for examining the properties of secondary structures of metals and coatings,” Powder Metall. Met. Ceram., 47, No. 7–8, 493–499 (2008).10.1007/s11106-008-9048-9 ↗