Effect of hydrophobization of powdered fillers on properties of polymer-based composites
Source abstract
Abstract
Possibility of filler hydrophobization by treatment with organosilicon compounds as well as influence of the treatment on the composite properties has been studied. Diatomite and tripoli were used as fillers, epoxy resin as binders, and polyorganohydridesiloxane (polyethylenehydrosiloxane) liquid GKZh-94 as a hydrophobic additive. The latter was found to markedly increase the filler specific surface area by 12.9 to 31.6% for the same time of treatment in a ball mill. It was shown that the optimum amount of organosilicon additive is 0.16%. It was found that after addition of GKZh-94 moisture absorption by the test fillers decreased roughly by 2.5 times and that polyorganohydridesiloxane liquid facilitates increase in ultimate bending strength of composites by 33.3–38.9%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Applications · Polymer Science and Applications · Advanced Theoretical and Applied Studies in Material Sciences and Geometry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. N. S. Zefirov (ed.), Chemical Encyclopedia [in Russian], Bol’shaya Rossijskaya Éntsiklopediya, Vol. 5, Moscow (1998), p. 962.
2. V. A. Kabanov (ed.), Encyclopedia of Polymers [in Russian], Sovetskaya Éntsiklopediya, Vol. 3, Moscow (1977), pp. 992–1001.
3. V. K. Knyazev, Epoxy Structural Materials in Machinery Engineering [in Russian], Mashinostroenie, Moscow (1977), pp. 137–149.
4. D. M. Karpinos and V. I. Oleinik, Polymers and Polymer-Based Composites in Engineering [in Russian], Nauk. Dumka, Kiev (1981), p. 166.
5. D. M. Karpinos (ed.), Composite Materials: A Handbook [in Russian], Nauk. Dumka, Kiev (1985), pp. 468–469.
6. D. M. Karpinos, L. I. Tuchinskii, et al., Composites in Engineering [in Russian], Tekhnika, Kiev (1985), p. 105.
7. Organosilicon Products Manufactured in the USSR: A Handbook [in Russian], Khimiya, Moscow (1975).
8. M. V. Sobolevskii (ed.), Oligoorganosiloxanes. Properties, Application, and Production [in Russian], Moscow (1985), p. 296.
9. N. R. Liberman (ed.), Chemistry: A Handbook [in Russian], Khimiya, Moscow (1975), p. 456.