Interaction of silicon-containing melts with single-crystal aluminum oxide
Source abstract
Abstract
The sessile droplet method is used to study the wettability of aluminum oxide (single-crystal Al2O3, i.e. sapphire) by melts of Au-Si, Cu-Si, Ni-Si, Pd-Si, and Ge-Si in relation to silicon concentration, temperature and exposure time. Addition of silicon to melt leads to a fall in the wetting angle from 120–140° for Au, Cu, Ni, Pd and Ge to 70–90° for an alloy with 30–70 at.% Si. The adhesion activity of silicon (a nontransition element) is lower than for transition metals (for example, Ti, Zr). In the systems Au-Si and Pd-Si a phenomenon of dewetting (the wetting angle increases after the initial spreading) is observed. Interphase chemical processes responsible for the wetting angle are studies by mass spectrometry, microscope and profilographic analyses for metal alloys and the surface of solid sapphire.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · nanoparticles nucleation surface interactions · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Y. Naidich, “High strength ceramic brazed joints scientific and technological bases,” 9th Cimtex-World Ceramics Congress, Ceramics: Getting into the 2000’s, Part C, Technica (1999), pp. 965–989.
2. Y. Naidich, “The wettability of solids by liquids,” Progress Surface Membrane Science, 14, 353–484 (1997).10.1016/B978-0-12-571814-1.50011-7 ↗
3. B. Drevet, D. Chaten, and N. Eustathopolous, “Wettability and three-phase equilibrium in the Ag-Si-Al2O3 system,” J. Chem. Phys., 87, 117–126 (1990).
4. C. Rodo, P. Rokabois, S. Kolageropoulos, and N. Eustathopolous, “Kinetics of wetting of Cu-Si alloys on monocrystalline λ-SiC,” Proc. Int. Conf. High Temp. Capillarity, Bratislava (1995), pp. 143–147.
5. Yu. V. Naidich, O. V. Durov, and B. D. Kostyuk, “Regularities and features of wetting and contact reaction of zirconium oxide materials with molten metals,” Dop. NAN Ukrainy, No. 8, 106–112 (2004).
6. M. Humenik and W. Kingery, J. Am. Ceram. Soc., 37, No. 1, 18 (1954).10.1111/j.1151-2916.1954.tb13972.x ↗
7. Yu. V. Naidich and V. S. Zhuravlev, “Study of the effect of the roughness of a surface on its wettability by metals,” in: Surface Phenomena in Melts and Solid Phases Arising from Them [in Russian], Kabardino-Balkar. Knizh. Izd., Nal’chik (1965), pp. 245–250.
8. Yu. V. Naidich, Contact Phenomena in Molten Metals [in Russian], Nauk. Dumka, Kiev (1972).
9. C. Wan, P. Kristalis, B. Drevet, and N. Eustathopolous, “Optimization of wettability and adhesion in reactive nickel-based alloys/alumina system by thermodynamic approach,” Mater. Sci. Eng., A 207, 181–187 (1996).10.1016/0921-5093(95)10020-2 ↗
10. G. Levi and W. Kaplan, “Al-Al2O3 interface morphology and thermodynamics from rewetting experiment,” Acta Met., 51, 2793–2802 (2003).10.1016/S1359-6454(03)00084-3 ↗
11. P. Xiao and B. Derby, “The wetting of silicon nitride by Cr-containing alloys,” J. Mater. Sci., 30, 5915–5922 (1995).10.1007/BF01151505 ↗
12. O. Kubashevsky and S. Alcock, Metallurgical Thermochemistry [Russian translation], Metallurgiya, Moscow (1982).
13. Yu. V. Naidich and V. S. Zhuravlev, “Adhesion, wettability and reaction of titanium-containing melts with refractory oxides,” Ogneupory, No. 1, 50–55 (1974).