Effect of molecular interaction on the strength of green compacts
Source abstract
Abstract
Modern approaches to calculating the strength of green compacts by van der Waals forces (σVW) are reviewed. Respective components (σVW) are calculated and green tensile strength (σtl.av) is experimentally determined for test powders of metals (Al, Zn, Cu, Ni, and Mo) and one nonmetal (FeSi). Comparison of σtl.av/σVW ratios shows that σtl.av and σVW are of one order for the atomized zinc powder, and σVW is greater than σtl.av for the atomized copper powder, though σtl.av is greater than σVW by two to three orders for most powders with irregular shape of particles. This difference can be attributed to the effect of shape and mechanical interlocking or seizure of particles when compacted. To predict the green strength, it is necessary to take into account both the shape of particles (or relative apparent density of the powder) and the forming temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Granular flow and fluidized beds · Energetic Materials and Combustion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A. K. Radchenko, “Mechanical properties of green compacts. II. Effect of powder relative bulk density on the strength of compacts with different forming temperature conditions,” Powder Metall. Met. Ceram., 43, No. 11–12, 552–563 (2004).10.1007/s11106-005-0021-6 ↗
2. W. B. Pietsch, “Adhesion and agglomeration of solids during storage, flow, and handling: A survey,” Trans. ASME, J. Eng. Indust., Ser. B, 5, No. 2, 435-449 (1969).10.1115/1.3591594 ↗
3. A. D. Zimon and E. I. Andrianov, Self-adhesion of Loose Materials [in Russian], Metallurgiya, Moscow (1978), p. 288.
4. B. Yu. Dorofeev, V. Yu. Dorofeev, Yu. N. Ivashchenko, et al., “Processes of splicing in hot-molded iron base materials. I. Method of investigation and general characteristic of fractograms,” Powder Metall. Met. Ceram., 27, No. 6, 434–437 (1988).10.1007/BF00798848 ↗
5. N. D. Sokolov, Molecular Interactions: Chemical Encyclopedia [in Russian], Vol. 3, Moscow (1992), pp. 12–14.
6. B. V. Deryagin, N. A. Krotova, and V. P. Smigla, Adhesion of Solids [in Russian], Nauka, Moscow (1973), p. 280.
7. C. J. van Oss, M. K. Chaudhury, and R. J. Good, “Interfacial Lifshitz–van der Waals and polar interactions in macroscopic systems,” Chem. Rev., 88, 927–941 (1988).10.1021/cr00088a006 ↗
8. M. Yu. Bal’shin, Powder Metallurgy [in Russian], Metallurgiya, Moscow (1948), p. 286.
9. G. A. Vinogradov and I. D. Radomysel’skii, Pressing and Rolling of Metal Ceramic Materials [in Russian], Mashgiz, Moscow–Kiev (1963), p. 200.
10. R. Winterton, “Van der Waals forces,” Usp, Fiz. Nauk, 105, No. 2, 307–320 (1971).10.3367/UFNr.0105.197110d.0307 ↗
11. Yu. S. Barash, Van der Waals Forces [in Russian], Nauka, Moscow (1988), p. 344.
12. B. V. Deryagin, I. I. Abrikosova, and E. M. Lifshitz, “Molecular attraction of condensed bodies,” Usp. Fiz. Nauk, 64, No. 3, 495–528 (1958).10.3367/UFNr.0064.195803e.0493 ↗
13. K. E. Easterling and A. R. Thölén, “Surface energy and adhesion at metal contacts,” Acta Metall., 20, No. 8, 1001–1008 (1972).10.1016/0001-6160(72)90134-4 ↗
14. V. D. Grechka, “Effect of intermolecular and electrostatic cohesive forces on the process of densification of particulate materials,” Powder Metall. Met. Ceram., 15, No. 11, 830–832 (1976).10.1007/BF00791774 ↗
15. D. Bortzmeyer, “Tensile strength of ceramic powders,” J. Mater. Sci., 27, No. 12, 3305–3308 (1992).10.1007/BF01116029 ↗
16. Q. Li, V. Rudolph, B. Weigl, and A. Earl, “Interparticle van der Waals force in powder flowability and compactibility,” Int. J. Pharmaceutics, 280, 77–93 (2004).10.1016/j.ijpharm.2004.05.001 ↗
17. V. I. Trefilov, Yu. V. Mil’man, and I. V. Gridneva, “Role of plastic deformation in sintering covalent crystals (review),” Powder Metall. Met. Ceram., 33, No. 7–8, 357–365 (1994).
18. M. A. Shtremel’, Strength of Alloys. Lattice Defects [in Russian], Mosk. Inst. Stali Splavov, Moscow (1999), p. 384.
19. L. V. Tikhonov, V. A. Kononenko, G. I. Prokopenko, and V. A. Rafalovskii (eds.), Structure and Properties of Metals and Alloys: Handbook. Mechanical Properties of Metals and Alloys [in Russian], Naukova Dumka, Kiev (1986), p. 568.
20. V. G. Osipov, “Determining the strength of compact from metal powders,” Zavod. Lab., 26, No. 1, 122–125 (1960).
21. C.-J. Tsai, D. Y. H. Pui, and B. Y. H. Liu, “Elastic flattening and particle adhesion,” Aerosol Sci. Tech., 15, No. 4, 239–255 (1991).10.1080/02786829108959531 ↗
22. G. V. Dedkov, E. G. Dedkova, R. I. Tegaev, and Kh. B. Khokonov, “Measurement of van der Waals and electrostatic forces in contacts of atomic force microscope probe with metal surfaces,” Pis’ma Zh. Tekh. Fiz., 34, No. 1, 38–47 (2008).
23. Y. H. Addab, “Conception et réalisation d’un système de micromanipulation contrôlé en effort et en position pour la manipulation d’objets de taille micrométrique,” Thèse de Doctorat, L’Université de Franche-Comté, Besançon (2000), p. 189.
24. R. V. Brach and P. F. Dunn, “A mathematical model of the impact and adhesion of microspheres,” Aerosol Sci. Tech., 16, No. 1, 51–64 (1992).10.1080/02786829208959537 ↗
25. A. W. Adamson, Physical Chemistry of Surfaces, John Wiley and Sons, New York (1976).
26. R. M. German, Powder Metallurgy Science, Metal Powder Industries Federation, New Jersey, Princeton (1984), 279.
27. V. V. Glagolev and A. G. Lanin, “Assessing the strength of elastic materials with the diametric compression method,” in: Methods for Study of Refractory Materials [in Russian], Atomizdat, Moscow (1970), pp. 148–156.
28. P. Doremus, F. Toussaiht, and O. Alvain, “Simple tests standard procedure for the characterization of green compacted powder,” in: A. Zavaliangos and A. Laptev (eds.), Recent Developments in Computer Modeling of Powder Metallurgy Processes, IOS Press, Amsterdam (2001), pp. 282–293.
29. M. Strömgren, H. Aström, and K. Easterling, “The effect of interparticle contacts area on the strength of cold-pressed aluminum powder compacts,” Powder Met., 16, No. 32, 155–165 (1973).10.1179/pom.1973.16.32.001 ↗
30. V. M. Mishin, I. V. Kislyuk, and V. I. Sarrak, “Analyzing the effect of alloying on iron cold-shortness threshold in terms of the Ioffe–Orowan scheme,” Fiz. Met. Metalloved., No. 7, 188–192 (1991).
31. V. N. Antsiferov and V. E. Perel’man, Compaction Mechanics of Powder and Composite Materials [in Russian], Graal Publishing House, Moscow (2001), p. 628.