journal article·2012-05

Production and properties of oxidation-resistant spark coatings on titanium alloys

A. V. Paustovskii, Yu. G. Tkachenko, R. A. Alfintseva, D. Z. Yurchenko, V. F. Britun, L. P. Isaeva

Powder Metallurgy and Metal Ceramics· Volume 51· Issue 1-2
Publisher page

Abstract

The paper examines the deposition of spark coatings from Ni–Cr–Al alloy, pressed and sintered in vacuum, on titanium alloys. The spark deposition parameters are optimized to produce coatings with a thickness to 30 μm, density not lower than 80%, and hardness about 8 GPa. It is shown that spark-deposited coatings on VT6 and VT22 alloys permit increase in their oxidation resistance by a factor of 1.5 to 2.5 during isothermal holding at 800°C. This increase is due to the formation of oxidation-resistant titanium phases on coatings, which prevent the diffusion of elements from air into the coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. A. D. Verkhoturov, I. A. Podchernyaeva, and F. F. Egorov, Electrode Materials for Electrospark Deposition [in Russian], Nauka, Moscow (1988), p. 200.
2. G. V. Samsonov, A. D. Verkhoturov, G. A. Bovkun, et al., Electrospark Deposition of Metal Surfaces [in Russian], Naukova Dumka, Kiev (1976), p. 270.
3. G. A. Bovkun and A. V. Laptev, “Relationship between erosion and mechanical characteristics of fine-grained hard alloy WC–16% Co obtained by solid-phase and liquid-phase consolidation. Part 1. Erosion resistance,” Powder Metall. Met. Ceram., 43, No. 5–6, 265–272 (2004).10.1023/B:PMMC.0000042461.02431.22 ↗
4. G. A. Bovkun and A. V. Laptev, “Relationship between erosion and mechanical characteristics of fine-grained hard alloy WC–16% Co obtained by solid-phase and liquid-phase consolidation. Part 2. Mass transfer (cathode mass gain and transfer coefficient),” Powder Metall. Met. Ceram., 43, No. 7–8, 383–390 (2004).10.1023/B:PMMC.0000048132.68519.b9 ↗
5. M. S. Kovalchenko, Yu. G. Tkachenko, V. F. Britun, et al., “Structure, mechanical and erosive properties of AlN–MoSi2 composite materials and their electrospark-deposited coatings,” Powder Metall. Met. Ceram., 47, No. 3–4, 183–190 (2008).10.1007/s11106-008-9003-9 ↗
6. I. A. Podchernyaeva, A. D. Panasyuk, V. A. Lavrenko, et al., “Structure and properties of composite electrospark, laser, and magnetron deposited AlN–TiB2 coatings,” Powder Metall. Met. Ceram., 40, No. 9– 10, 501–508 (2001).10.1023/A:1014343807933 ↗
7. I. A. Podchernyaeva, A. D. Panasyuk, M. A. Teplenko, et al., “Tribological properties of finely-dispersed coatings with electric-spark alloying of materials of the system Ti–Al–Ni,” Powder Metall. Met. Ceram., 41, No. 11–12, 599–608 (2002).10.1023/A:1022984203788 ↗
8. Yu. G. Tkachenko, V. F. Britun, G. A. Bovkun, et al., “Electroerosion behavior of a ceramic based on boron carbide: Phase composition, structure, and properties of protective spark coatings,” Powder Metall. Met. Ceram., 44, No. 11–12, 537–544 (2005).10.1007/s11106-006-0022-0 ↗
9. C. T. Sims and W. C. Hagel, Superalloys, John Wiley & Sons, New York (1972).
10. O. A. Bannykh and K. B. Povarova, “Prospects of developing heat- and oxidation-resistant alloys and intermetallic compounds,” in: New Metallic Materials [in Russian], Inst. Élektrosvar. AN USSR, Kiev (1980), pp. 187–192.
11. Yu. S. Borisov, Yu. A. Kharlamov, S. P. Sidorenko, et al., Thermal-Sprayed Coatings from Powder Materials [in Russian], Naukova Dumka, Kiev (1987), p. 544.
12. B. A. Movchan and I. S. Malashenko, Oxidation-Resistant Coatings Deposited in Vacuum [in Russian], Naukova Dumka, Kiev (1983), p. 231.
13. A. V. Paustovskii, R. A. Alfintseva, V. V. Pogorelaya, et al., “Electrospark deposition of coatings from Ni– Cr–Al–Y eutectic alloy,” Fiz. Khim. Mekh. Mater., No. 3, 93–96 (2003).
14. R. A. Alfintseva, N. P. Brodnikovskii, A. V. Laptev, et al., “Properties of Ni–Cr–Al alloys obtained by a powder metallurgy method,” Powder Metall. Met. Ceram., 42, No. 3–4, 137–144 (2003).
15. A. V. Paustovskii, R. A. Alfintseva, T. V. Kurinnaya, et al., “Laws of formation of electrospark coatings from alloys of the Ni–Cr–Al–Y system,” Powder Metall. Met. Ceram., 43, No. 5–6, 251–257 (2004).10.1023/B:PMMC.0000042459.91784.5c ↗
16. A. V. Paustovskii, R. A. Alfintseva, A. V. Laptev, et al., “Dependence of the properties of spark-deposited Ni–Cr–Al–Y coatings on the electrode production method,” Tekh. Mashinostr., No. 2, 71–74 (2006).
17. A. V. Paustovskii, R. A. Alfintseva, and S. G. Pyatachuk, “Properties of spark-deposited Ni–Cr–NiAl coatings,” Powder Metall. Met. Ceram., 48, No. 7–8, 429–434 (2009).10.1007/s11106-009-9147-2 ↗
18. A. V. Paustovskii, R. A. Alfintseva, T. V. Kurinnaya, et al., “Kinetics of mass transfer in electrospark deposition of steel 45 with Ni–Cr–NiAl electrodes,” Perspekt. Mater., No. 1, 86–90 (2009).