Formation of titanium oxide phases in vacuum condensates produced by laser evaporation
Source abstract
Abstract
Titanium oxide vacuum condensates are produced by laser evaporation in vacuum, which involves vapor condensation onto a polycrystalline molybdenum substrate heated between 200 and 1500°C. The phases formed in titanium oxide vacuum condensates and their microstructure are studied with x-ray and electron diffraction and transmission electron microscopy. It is established that the phases formed in titanium oxide vacuum condensates are determined by substrate temperature (T s): amorphous TiO2 forms at T s < 400°C, anatase crystallizes at higher T s and coexists with rutile at T s = 700–900°C, and rutile alone is observed at T s > 900°C. Laser evaporation at T s < 1400°C promotes oxygen-rich TiO2 phases and that at T s ≥ 1400°C leads to Magneli phases in titanium oxide vacuum condensates. Higher T s results in phases in which the titanium–oxygen atomic ratio does not correspond to the TiO2 formula. It is shown that variation in the substrate temperature and the size of crystallites in titanium oxide vacuum condensates is symbate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Ya. G. Goroshchenko, Chemistry of Titanium [in Russian], Naukova Dumka, Kiev (1970), p. 415.
2. S. Zador and C. B. Alcock, “Thermodynamic study of Magnéli and point defect structures in the Ti–O system,” High Temp. Sci., 16, No. 3, 187–207 (1983).
3. R. C. De Vries and R. Roy, “A phase diagram for the system Ti–TiO2 constructed from data in the literature,” J. Am. Ceram. Soc. Bull., 33, No. 2, 370–372 (1954).
4. Yingmin Wang, Electron Microscopy Studies of Real and Model Oxide Supported Au Catalysts, PhD Thesis, Evanston, Illinois (2006).
5. A. M. Zaslavskii, “Deposition of oxide condensates with a preset structure using laser evaporation in vacuum,” in: Physicochemistry of Condensed Systems and Interface Boundaries (Collected Scientific Papers) [in Ukrainian], Kiev (2003), pp. 76–80.
6. V. M. Danilenko and A. M. Zaslavskii, “Modeling the temperature mode for deposition of oxide films with laser atomization,” Adgez. Raspl. Paika Mater., Issue 34, 89–95 (1999).
7. A. V. Melnikov and A. M. Zaslavskii, “Condensation model for binary oxide films produced by laser evaporation,” Acta Chim. Hungar. Models Chem., 130, No. 5, 631–637 (1993).
8. Ya. I. Gerasimov, Course of Physical Chemistry [in Russian], Vol. 1, Khimiya, Moscow (1969).
9. V. Ya. Anosov and M. I. Ozerov, Fundamentals of Physicochemical Analysis [in Russian], Nauka, Moscow (1976).