journal article·2008-09

Effect of alloy components on the performance characteristics of antifriction graphite-bronze powder material

O. I. Fushchich, V. T. Varchenko

Powder Metallurgy and Metal Ceramics· Volume 47· Issue 9-10
Publisher page

Abstract

The paper examines the effect of nickel and phosphorus on the performance characteristics of antifriction graphite-bronze powder materials under high pressures (to 20 MPa), at substantial sliding velocities (1-2 m/sec), and with a liquid lubricant supplied from an oil-impregnated felt pad. It is established that Cu-Ni-P-C graphite bronze of the optimal composition has a friction coefficient of 0.028-0.045 and can perform till 150°C in the above conditions. The material is microheterogeneous: the bearing structural component is α solid solution of nickel in copper with the hardening phase being evenly distributed along its boundaries (Cu 3 P mesh with inclusions of phosphide eutectic (Cu-Ni) + Cu 3 P); the antifriction structural component represents graphite inclusions evenly distributed in the material matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. I. M. Fedorchenko and L. I. Putina, Antifriction Sintered Composite Materials [in Russian], Naukova Dumka, Kiev (1980), p. 440.
2. V. N. Klimenko and I. M. Fedorchenko, GOST 26719-85: Antifriction Copper-Based Powder Materials. Grades [in Russian], Introduced December 19, 1985.
3. Powder Metallurgy Abroad: Signal Information on Company Documentation [in Russian], Issue 1–2, Kiev (1977).
4. V. V. Saklinskii, Properties of Metal Ceramics and Their Application in Mechanical Engineering [in Russian], Moscow (1964), p. 36.
5. Properties of Metal Powders, Refractory Compounds, and Sintered Materials: Handbook [in Russian], Naukova Dumka, Kiev (1978), p. 182.
6. V. I. Pavlenko and D. S. Yas', Modern Copper and Graphite-Bronze Materials and Their Application in Light Industry (Express Information, Textile Industry) [in Russian], TsNII Inf. Tekh. Ékon. Issled. Legk. Prom.
7. S. A. Chernavskii, Sliding Bearings [in Russian], Mashgiz, Moscow (1963), p. 243.
8. A. G. Kostornov, Yu. M. Simeonova, O. I. Fushchich, et al., “Determining impact of the tribological synthesis of new structures in the friction zone on operating properties of antifriction materials,” in: Friction and Wear Problems (Collected Scientific Papers) [in Ukrainian], Issue 46, Aviat. Univ. (2006), pp. 109–121.
9. A. G. Kostornov, O. I. Fushchich, T. M. Chevychelova, and O. D. Kostenko, “Effect of alloying components on the tribotechnical properties of iron-based powder material,” in: Friction and Wear Problems (Collected Scientific Papers) [in Ukrainian], Issue 47, Aviat. Univ. (2007), pp. 121–131.
10. Yu. V. Naidich, V. M. Perevertailo, and G. M. Nevodnik, “Wetting of graphite by nickel as affected by the liquid-phase dissolution process of carbon,” Powder Metall. Met. Ceram., 10, No. 1, 45–47 (1971).10.1007/BF00798047 ↗
11. I. V. Kragel'skii and V. V. Alisin (eds.), Friction, Wear, and Lubrication [in Russian], Vol. 1, Mashinostroenie, Moscow (1978).