Hydrodynamic particle-size classification of aluminum alloy powders
Source abstract
Abstract
Powder fractionation is an essential part of powder metallurgy processes. However, powder particles smaller than 40 μm can hardly be classified. Meshes with openings smaller than 40 μm are not used in conventional sieving because of very low effectiveness since powder is suspended above the sieve as a result of vibration, which makes it difficult for the particles to pass through the mesh. Powders with particles smaller than 40 μm can be fractionated by hydroclassification. The hydroclassification of aluminum alloy powders and distribution of powder particle sizes are studied, and efficient hydroclassification methods are developed. Water-atomized aluminum powders and alloys have not been produced until recently because of the explosion hazard as hydrogen releases when aluminum interacts with water. A method is proposed for the hydroclassification and, thus, fractionation of powders over a wide range of particle sizes, including those smaller than 40 μm, beginning with 0–10 μm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. T. Allen, “Sampling and classification of powders,” in: ASM Handbook, Vol. 7, ASM International Publishers, (1998), pp. 206–221.
2. M. D. Barskii, Powder Fractionation [in Russian], Metallurgiya, Moscow (1980).
3. O. D. Neikov, “Water atomized powder technologies for advanced aluminum alloy production,” in: Proc. 2000 Powder Metallurgy World Congress, Jap. Society of Powder Metallurgy, Kyoto (2000), pp. 464–466.
4. O. D. Neikov, A. V. Krajnikov, Yu. Milman, et al., “Advanced PM aluminum alloys produced by new rapid solidification technology,” in: Proc. PM’2004 World Congress, Vol. 1, European Powder Metallurgy Association, Shrewsbury, UK (2004), pp. 237–242.
5. O. D. Neikov, Yu. V. Milman, A. I. Sirko, et al., “Elevated temperature aluminum alloys produced by water atomization. Water atomized aluminum alloy powders,” Mat. Sci. Eng. A, 477, 80–85 (2008).10.1016/j.msea.2007.05.122 ↗
6. A Method to Make Half-Finished Products from Aluminum Alloys [in Russian], Patent of Ukraine No. 66588, Byul. No. 9, September 15 (2005).
7. O. V. Efremov, O. D. Neikov, P. B. Rabin, and M. F. Salamatina, “Microencapsulation of metal powders for preventing detonation and dust in their production and conversion. III. The kinetics of gas evolution,” Powder Metall. Met. Ceram., 30, No. 10, 892–895 (1991).10.1007/BF00795867 ↗
8. A. K. Lokenbakh, N. A. Zaporina, and L. K. Lepinu, “Phase compositions and structure of oxide films on fine aluminum powder particles,” Tr. Latv. AN, Ser. Khimiya, No. 1, 45 (1981).
9. P. A. Kouzov, Fundamentals of the Particle-Size Analysis of Industrial Dusts and Ground Materials [in Russian], Khimiya, Leningrad (1974).
10. J. J. Dunkley, “Atomization,” in: ASM Handbook, Vol. 7, ASM International Publishers (1998), pp. 35–52.
11. A. Lawley, Atomization, Metal Powder Industries Federation Publishers, Princeton (2003).