journal article·2002-07

Structural Wear-Resistant Sintered Materials Based on Titanium

Alla M. Petrova

Powder Metallurgy and Metal Ceramics· Volume 41· Issue 7-8
Publisher page

Abstract

A principle is proposed for increasing the wear resistance of structural titanium materials by addition (together with a moderate number of hard inclusions) of alloying elements which, without decreasing the strength and ductility of titanium, increase the wear resistance of the material thanks to the formation of oxide films during friction that prevent seizing of the contacting surfaces. Requirements for the hard inclusions and alloying additions were defined, the basic of which is a high affinity of the alloying elements for oxygen. Grades of wear-resistant structural titanium materials were created and recommended for use in the production of components operating in friction units at room temperature (IT20, IT15V) and at 250-550°C (IT16M). The mechanical properties and operating conditions (sliding rate, pressure, temperature, counterbody material, atmosphere) of the sintered titanium materials were investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Applications · Surface Treatment and Coatings · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. P. D. Miller and J. W. Holladay, “Friction and wear properties of titanium,” Wear, 2, No. 2, 133–140 (1958).10.1016/0043-1648(58)90428-9 ↗
2. S. A. Kushakevich and K. M. Sokolov, “Comparative evaluation of the antifrictional properties of commercial titanium,” Technology of Light Alloys, No. 4, 83–88 (1970).
3. I. I. Kornilov, Titanium. Sources, Compositions, Properties, Metal-Chemistry and Applications[in Russian], Science, Moscow (1975).
4. E. Michell and P. I. Brotherton, “Surface treatments for improving the wear-resistance and friction properties of titanium and its alloys,” J. Inst. Metals, 93, No. 11, 381–386 (1965).
5. Yu. V. Grdina, L. T. Gordeeva, and L. T. Timoshina, “Surface strengthening of titanium with nitrogen and carbon by high-frequency induction heating,” in: Diffusion Coatings on Metals[in Russian], Nauk. Dumka, Kiev (1965), pp. 109–115.
6. Patent No. 32560274, USA, “Wear-resistant titanium, titanium alloys and methods for their production,” JBM Company, published February 2, 1971.
7. D. S. Gil'gur, A. S. Berenblyum, V. V. Bezer, and L. M. Ivanchenko, “Wear resistance of titanium alloys after thermodiffusional chrome-siliciding,” Fiz. Khim. Mekh. Mater., 5, No. 2, 222–224 (1969).
8. Yu. N. Presman and G. G. Panich, “Saturation of titanium alloys with aluminum and chromium,” Metallovedeniye, Term. Obrabotka, No. 1, 69–70 (1976).
9. Patent No. 2046614, FRG, “Titanium alloy obtained by powder metallurgy method,” FFGT Co., published August 17, 1972.
10. I. D. Radomysel'skii, A. M. Petrova, et al., “Wear-resistant materials based on titanium,” Inform. Letter, Kiev (1976), 3 pages.
11. A. M. Petrova and V. V. Polotai, “Effect of chromium concentration on the tribological properties of titanium - chromium alloys,” Poroshk. Metall., No. 5, 51–56 (1987).
12. I. D. Radomysel'skii, S. V. Tatarenko, A. M. Petrova, and V. V. Polotai, “Study of the friction and wear of sintered titanium materials,” Poroshk. Metall., No. 6, 73–78 (1977).
13. I. D. Radomysel'skii, V. N. Klimenko, A. M. Petrova, et al., “Structural and phase transformations occurring in sintered titanium materials during friction,” Poroshk. Metall., No. 5, 66–70 (1982).
14. O. P. Solonina and S. G. Glazunov, Heat-Resistant Titanium Alloys[in Russian], Metallurgiya, Moscow (1976).