Experience of Improving Standards and Methods for Studying the Properties of Metal Powders and Sintered Articles
Source abstract
Abstract
Reasons are considered for improving standards in the following methods for testing powder materials: tensile, transverse bending, gas and liquid permeability, and determination of powder compact dimensions after compaction pressure removal and during sintering. Calculated data for representative specimen dimensions (cross section and thickness) for these and other test methods for sintered articles (materials) prepared from mono- and polyfraction iron powder of different sizes are confirmed by experiment. It is shown that the representative specimen dimensions prepared from monofraction powder are more than an order of magnitude less than for those prepared from polyfraction powder. The reason for this difference is considered to be the special role of individual particles (for monofraction powder) or assemblies of these particles (for polyfraction powder) in forming elementary fragments within the structure of compacts and sintered articles. Data are provided for the improved ISO 4492-1985 standard and a new GOST 29012-91 standard developed on the basis of it for precise determination of changes in the dimensions of powder compacts during pressing and sintering. Use of this method makes it possible to reveal the existence of different structural states within narrow porosity limits for powder materials. It is shown by experiment that the pulsed ultrasonic method for monitoring these structural states based on measuring the propagation rate and (or) the elastic wave damping factor, exhibits high sensitivity, it is rapid, and it may be recommended for extensive introduction and standardization in powder metallurgy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Polymer Science and Applications · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. ISO 2740–1896, “Sintered metal materials (excluding hardmetal). Tensile test pieces,” Publ. 1986.
2. GOST 18227–98, “Sintered metal materials excluding hard alloys. Tensile test specimens,” Intro. 01.07.99.
3. A. S. Drachinskii, A. E. Kushchevskii, T. F. Mozol', and Yu. N. Podrezov, “Effect of the scale factor on the results of determining mechanical properties of powder materials based on iron,” Poroshk. Metall., No. 3, 88–94 (1983).
4. ISO 3325–75, “Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength,” Publ. 1975.
5. GOST 18228–94, “Sintered metal materials apart from hard alloys,” Intro. 01.07.95.
6. GOST 26719–85, “Antifriction powder materials based on copper. Grades,” Intro. 01.01.87.
7. GOST 26802–86, “Antifriction powder materials based on iron. Grades,” Intro. 01.01.87.
8. ISO 4022–1987, “Permeable sintered materials. Determination of fluid permeability,” Publ. 1987.
9. GOST 25283–93, “Sintered permeable materials. Determination of fluid permeability,” Intro. 01.01.97.
10. ISO 4492–1985, “Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering,” Publ., 1985.
11. GOST 29012–91, “Powder metallurgy. Method for determining the change in compact dimensions after pressing pressure removal and during sintering,” Intro. 01.07.92.
12. I. M. Fedorchenko, A. E. Kushchevskii, T. F. Mozol', and V. F. Chudovskii, “Features of compaction of metal powders during pressing,” Poroshk. Metall., No. 3, 13–17 (1987).
13. A. E. Kushchevskii, V. T. Bondar', N. A. Krylova, et al., “Study of the structure of powder iron with different porosity by scanning electron microscopy,” Poroshk. Metall., No. 9, 91–95 (1990).
14. A. E. Kushchevskii, A. I. Yuga, A. A. Sotnik., et al., “Dependence of stress intensity factor and tribological properties of powder iron on porosity,” Poroshk. Metall., Nos. 9–10, 107–110 (1993).
15. A. E. Kushchevskii and Yu. G. Bezymyannyi, “Method for high-precision determination of the elastic aftereffect of compacts made from powder after pressing pressure removal,” in: Nove Kierunki Technologii i Badan Materialowych, I. Ranachewski, I. Raabe, and W. Petrovski (eds.), Warsawa (1999).