Porous Structure of Powders Prepared with Heat Treatment of Gels from Tin (IV) and Antimony (III) Hydroxides
Source abstract
Abstract
The effect of heat treatment on the parameters of the porous structure of powders in the system Sn(IV) ― Sb ― O is studied. It is established that xerogels of coprecipitated tin and antimony hydroxides dried at 360 K are microporous adsorbents containing particles of both crystalline and amorphous phases. During powder heat treatment there is formation of solid solutions based on tin dioxide and there is redistribution of the microporous structure into a mesoporous structure. This is accompanied by a reduction in specific surface and an increase in pore size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalysis and Oxidation Reactions · Pigment Synthesis and Properties · Adsorption, diffusion, and thermodynamic properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. W. Göpel and K. Scheibaum, “SnO2 sensors: current status and future prospects,” Sensors and Actuators B, 26-27,1-12 (1995).10.1016/0925-4005(94)01546-T ↗
2. V. G. Grebenkina, V. S. Dobroer, L. I. Panov, and Yu. P. Trizna, Thick-Film Microelectronics [in Russian], Nauk.Dumka, Kiev (1983).
3. J. Halasz, K. Varga, P. Fejes, and K. Hernadi, “Mechanism of oxidation of propene and isobutane over mixed tinantimonyoxide catalysts,” Acta Chim.Hung., 124,No. 1, 35-46 (1987).
4. L. M. Sharygin, V. F. Gonchar, and V. I. Barybin, “Study of the thermal stability of hydrated tin dioxide prepared by the sol-gel method,” Izv. Akad. Nauk SSSR, Neorg. Materialy, 17,No. 10, 1804-1808 (1981).
5. N. P. Maksimovich, D. E. Dyshel', L. É. Eremina, et al., “Semiconductor sensors for monitoring the composition of gas atmospheres,” Zh. Analit. Khim., 45,No. 7, 1312-1316 (1990).
6. D. E. Dyshel', B. M. Rud', and A. I. Tereshin, “Pastes for high-resistance resistors,” Tekhnika Sredtsv Svyazi. Ser. Tekhnologika Proizvodstva i Oborudivanie, No. 4, 52-56 (1990).
7. S. Greg and K. Sing, Adsorption, Specific Surface and Porosity [Russian translation], Mir, Moscow (1970).
8. K. Sing, “Use of physical adsorption for determining the amount of surface and pore distribution with respect of size,” in: Methods for Studying Catalysts [in Russian], Mir, Moscow (1983), pp. 20-38.
9. P. G. Harrison and A. Guest, “Tin oxide surfaces. Part 17. An infrared and thermogravimetric analysis of thermal dehydration of tin (IV) oxide gel,” J. Chem. Soc. Faraday Trans. I, 83, No. 11, 3383-3387 (1987).10.1039/f19878303383 ↗
10. C. Santilli and S. Pulcinelli, “Porosity evolution in SnO2 xerogels during sintering under isothermal conditions,” Phys. Rev. B, 51, No. 14, 8801-8809 (1995).10.1103/PhysRevB.51.8801 ↗
11. D. V. Tarasova, I. P. Olen'kova, V. A. Dzis'ko, et al., “Effect of preparation conditions on the amount of surface and phase composition of catalysts based on antimony oxide,” Kinetika i Kataliz, 12,No. 6, 1546-1554 (1971).
12. L. I. Bondarenko, G. P. Safro, and A. A. Chuiko, “Structure of hydrated antimony trioxide,” Dokl. Akad. Nauk UkrSSR, Ser. B, No. 10, 35-38 (1983).
13. D. E. Dyshel', S. A. Bliznyuk, B. M. Rud', et al., “Features of the synthesis and size fraction analysis of tin oxide powder alloyed with antimony for thick-film resistors,” in: Materials and New Production Processes in Microelectronics [in Russian], Institute for Problems of Material Science, National Academy of Sciences of Ukraine, Kiev (1989).
14. G. Brauer (ed.), Manual of Inorganic Synthesis: in 6 Vol., Vol. 2 [in Russian], Mir, Moscow (1985).
15. M. V. Vlasova, D. E. Dyshel', and N. G. Kakazei, “Process of forming fine particles during heat treatment of a mixture of tin and antimony hydroxides,” Izv. Akad. Nauk SSSR, Neorg. Materialy, 26, No. 7, 1487-1490 (1990).
16. P. A. Cox, R. G. Egdell, C. Harding, et al., “Surface properties of antimony doped tin (IV) oxide: a study by electron spectroscopy,” Surface Sci., 123, No. 2, 179-203 (1982).10.1016/0039-6028(82)90322-3 ↗
17. D. E. Dyshel', N. P. Maksimovich, S. A. Bliznyuk, et al., “Properties of the surface of powders of the system Sn(IV) -Sb -O and sensor materials based on them,” Poroshk. Metall., Nos. 11-12, 60-65 (1993).
18. D. E. Dyshel', “Mechanism of forming oxygen vacancies in tin dioxide alloyed with antimony,” Neorg. Materialy,32, No. 1, 59-62 (1996).
19. D. Pyke, R. Reid, and R. J. Tilley, “Structures of tin-antimony oxide catalysts,” J. Chem. Soc. Faraday Trans. I, 76,1174-1182 (1980).10.1039/f19807601174 ↗
20. L. M. Sharygin, V. F. Gonchar, and V. M. Galkin, “Change in the porous structure of tin dioxide during heattreatment,” Kinetika i Kataliz, 15, No. 5, 1269-1274 (1974).