journal article·2020-09

Phase Equilibria in the ZrO2–CeO2–Yb2O3 System at 1100°C

O. A. Korniienko, A. I. Bykov, E. R. Andrievskaya, A. A. Makudera

Powder Metallurgy and Metal Ceramics· Volume 59· Issue 5-6
Publisher page

Abstract

Phase equilibria and structural transformations in the ternary ZrO2–CeO2–Yb2O3 system at 1100°C were studied by X-ray diffraction over the entire composition range. Fields of solid solutions based on monoclinic (M) and tetragonal (T) ZrO2 modifications, cubic (C) Yb2O3 modification, cubic fluorite-type (F) CeO2 (ZrO2) modification, and an intermediate Zr3Yb4O12 (δ) orthorhombic phase were found to exist in the system. The boundaries of the phase fields and lattice parameters of the phases were determined. The maximum solubility of cerium oxide in the δ phase was 4 mol.% at the CeO2–(60 mol.% ZrO2–40 mol.% Yb2O3) section. Solid solutions based on the tetragonal ZrO2 modification were established to form in the region with high ZrO2 content. The solubility of Yb2O3 in T-ZrO2 is low and comes to δ0.5 mol.%, which is evidenced by X-ray diffraction and microstructural analyses. The solid solutions based on the tetragonal ZrO2 modification cannot be quenched from high temperatures in the chosen cooling conditions. An infinite series of F-CeO2(ZrO2) solid solutions forms at 1100°C. The isothermal section of the ZrO2–CeO2–Yb2O3 system at 1100°C contains one three-phase region (F + C + δ), five single-phase regions (FCeO2(ZrO2), M-ZrO2, T-ZrO2, δ, C-Yb2O3), and five two-phase regions (C + F, C + δ, F + δ, F + T, T + M). New phases were not found in the system. The nature of phase equilibria in the ternary ZrO2–CeO2–Yb2O3 system at 1100°C is determined by the constitution of binary phase diagrams.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. S.F. Wang, J. Zhang, D.W. Luo, F. Gu, D.Y. Tang, Z.L. Dong, G.E.B. Tan, W.X. Que, T.S. Zhang, S. Li, and L.B. Kong, “Transparent ceramics: processing, materials and applications,” Prog. Solid State Chem., 41, No. 1–2, 20–54 (2013), http://dx.doi.org/ https://doi.org/10.1016/j.progsolidstchem.2012.12.002 .10.1016/j.progsolidstchem.2012.12.002 ↗
2. J. Sanghera, S. Bayya, G. Villalobos, W. Kim, J. Frantz, B. Shaw, B. Sadowski, R. Miklos, C. Baker, M. Hunt, I. Aggarwal, and F. Kung, “Transparent ceramics for high-energy laser system,” Opt. Mater., 33, 511–518 (2011), http://dx.doi.org/ https://doi.org/10.1016/j.optmat.2010.10.038 .10.1016/j.optmat.2010.10.038 ↗
3. M. Boniecki, Z. Librant, A. Wajler, W. Wesolowski, and H. Weglarz, “Fracture toughness, strength and creep of transparent ceramics at high temperature,” Ceram. Int., 38, No. 6, 4517–4524 (2012), http://dx.doi.org/ https://doi.org/10.1016/j.ceramint.2012.02.028 .10.1016/j.ceramint.2012.02.028 ↗
4. Mustafa Kaplan, Mehmet Faruk Ebeoglugil, Isil Birlik, Recep Yigit, Erdal Celik, and Esref Avci, “High temperature Yb2O3–ZrO2 insulation coatings on ag tapes for magnet technology,” Afyon Kocatepe Univ. J. Sci. Eng., 14, 117–128 (2014).
5. V. Longo and S. Roitti, “Solid state phase relations in the system CeO2–ZrO2,” Ceram. Int., 1, No. 1, 4–10 (1971).
6. M. Yoshimura, E. Tani, and S. Somiya, “The confirmation of phase equilibria in the system ZrO2–CeO2 below 1400°C,” Solid State Ionics, No. 3–4, 477–481 (1981), https://doi.org/ https://doi.org/10.1016/0167-2738(81)90136-3 .10.1016/0167-2738(81)90136-3 ↗
7. E. Tani, M. Yoshimura, and S. Somiya, “Revised phase diagram of the system ZrO2–CeO2 below 1400°C,” J. Am. Ceram. Soc., 66, No. 7, 506–510 (1983), https://doi.org/ https://doi.org/10.1111/j.1151-2916.1983.tb10591.x .10.1111/j.1151-2916.1983.tb10591.x ↗
8. P. Duran, M. Gonzales, C. Moure, J.R. Jurado, and C. Pascual, “A new tentative phase equilibrium diagram for the ZrO2–CeO2 system in air,” J. Mater. Sci., 25, 5001–5006 (1990).10.1007/BF00580121 ↗
9. B.P. Mandal, V. Grover, M. Roy, and A.K. Tayagi, “X-ray diffraction and Raman spectroscopic investigation on the phase relation in Yb2O3- and Tm2O3-substituted CeO2,” J. Amer. Soc., 90, Issue 9, 2961–2965 (2007).
10. G. Adachi and N. Imanaka, “The binary rare earth oxides,” Chem. Rev., 98, 1479–1514 (1998).10.1021/cr940055h ↗
11. E.R. Andrievskaya, O.A. Kornienko, O.I. Bykov, A.V. Sameliu, and Z.D. Bohatyriova, “Interaction of ceria and ytterbia in air within temperature range 1500–600°C,” J. Eur. Ceram. Soc., 39, 2930–2935 (2019).10.1016/j.jeurceramsoc.2019.03.021 ↗
12. O.A. Kornienko, “Interaction between cerium and ytterbium oxides at 1100°C,” Visn. Dripropetr. Univ. Ser. Khim., No. 24(2), 94–101 (2016).
13. M.R. Thormber, D.J.M. Bevan, and E. Summerville, “Mixed oxides of the type MO2 (fluorite) – M2O3 very phase studies in the system ZrO2–M2O3 (M = Sc, Yb, Er, Dy),” J. Solid State Chem., 1, 545–553 (1970), DOI: https://doi.org/10.1016/0022-4596(70)90140-4 .10.1016/0022-4596(70)90140-4 ↗
14. A. Rouanet, “Contribution to the study of zirconia–lanthanide oxide systems near the melting point: Theses,” Rev. Int. Hautes Temper. Refract., 8, No. 2, 161–180 (1971).
15. O. Fabrichnaya and H.J. Seifert, “Thermodynamic assessment of the ZrO2–Yb2O3–Al2O3 system,” Calphad, 3, 206–214 (2010), http://dx.doi.org/ https://doi.org/10.1016/j.calphad.2010.03.001 .10.1016/j.calphad.2010.03.001 ↗
16. C. Angeles-Chavez, P. Salas, L.A. Díaz-Torres, E. de la Rosa, R. Esparza, and R. Perez, “Structural and chemical characterization of Yb2O3–ZrO2 system by HAADF-STEM and HRTEMC,” Microsc. Microanal., 15, 46–53 (2009).10.1017/S1431927609090047 ↗
17. G.S. Corman and V.S. Stubican, “Phase equilibria and ionic conductivity in the system ZrO2–Yb2O3–Y2O3,” J. Am. Ceram. Soc., 68, Issue 4, 174–181 (1985), DOI: https://doi.org/10.1111/j.1151-2916.1985.tb15293.x .10.1111/j.1151-2916.1985.tb15293.x ↗
18. L.M. Lopato, V.P. Red’ko, and G.I. Gerasimyuk, “Synthesis of some REE zirconates (hafnates),” Powder Metall. Met. Ceram., 29, No. 4, 318–320 (1990).10.1007/BF00797236 ↗
19. S.M. Lakiza, V.P. Red’ko, and L.M. Lopato, “The Al2O3–ZrO2–Yb2O3 phase diagram. I. Isothermal sections at 1250 and 1650°C,” Powder Metall. Met. Ceram., 47, No. 3–4, 202–210 (2008), DOI: https://doi.org/10.1007/s11106-008-9006-6 .10.1007/s11106-008-9006-6 ↗
20. S.M. Lakiza, Z.O. Zaitseva, and L.M. Lopato, “Physicochemical materials research Al2O3–ZrO2–Yb2O3 phase diagram. II. Liquidus surface,” Powder Metall. Met. Ceram., 47, No. 5–6, 338–343 (2008), DOI: https://doi.org/10.1007/s11106-008-9025-3 .10.1007/s11106-008-9025-3 ↗
21. S.M. Lakiza, V.P. Red’ko, and L.M. Lopato, “Al2O3–ZrO2–Yb2O3 phase diagram. III. Solidus surface and phase equilibria in alloy solidification,” Powder Metall. Met. Ceram., 47, No. 7–8, 420–427 (2008).10.1007/s11106-008-9036-0 ↗
22. S.M. Lakiza, V.P. Red’ko, and L.M. Lopato, “Physicochemical materials research Al2O3–ZrO2–Yb2O3 phase diagram. IV. Vertical sections,” Powder Metall. Met. Ceram., 47, No. 9–10, 577–585 (2008).10.1007/s11106-008-9061-z ↗
23. Chong Wang, Experimental and Computational Phase Studies of the ZrO2-Based Systems for Thermal Barrier Coatings, Dissertation at the University of Stuttgart, Max-Planck Institute for Metal Research (2006).
24. M. Gonzalez, C. Moure, J.R. Jurado, and P. Duran, “Solid-state reaction, microstructure and phase relations in the Zr-rich region of the ZrO2–Yb2O3 system,” J. Mater. Sci., 28, 3451–3456 (1993), DOI: https://doi.org/10.1007/BF01159821 .10.1007/BF01159821 ↗
25. O.A. Kornienko, E.R. Andrievskaya, A.I. Bykov, and Zh.D. Bogatyreva, “Phase equilibria in the ZrO2–Yb2O3 system at 1100°C,” Visn. Odesa Nats. Univ. Ser. Khim., 23, No. 1(65), 83–95 (2018).10.18524/2304-0947.2018.1(65).124549 ↗
26. E.R. Andrievskaya, Phase Equilibria in the Hafnium, Zirconium, and Yttrium Oxides with Rare Earth Oxides: Monograph [in Russian], Naukova Dumka, Kyiv (2010), p. 47.