journal article·2019-06

Friction–Wear Performances of Cathodic Arc Ion Plated CrN Coating at Elevated Temperatures

Shen hui, Zhao Wen, Zhu Shouyu, Kong Dejun

Powder Metallurgy and Metal Ceramics· Volume 58· Issue 1-2
Publisher page

Abstract

CrN coating was deposited on YT14 cemented carbide cutting tools using a cathodic arc ion plating (CAIP). The surface and cross-section morphologies and phases of obtained coating were analyzed using a scanning electron microscope (SEM) and X-ray diffractometer (XRD), respectively. The coefficients of friction (COFs) of CrN coating under the loads of 3, 5, and 7 N were investigated using a high temperature tribometer, and the effects of loads on friction–wear properties of CrN coating were discussed. The results show that the chemical elements are diffused at CrN coating interface. The average COF of CrN coating under the loads of 3, 5, and 7 N is 0.4318, 1.1586, and 0.4955, respectively. The wear mechanisms are abrasive wear, oxidation wear, adhesive wear and plastic deformation, CrN coating has high wear resistance under the load of 3 N, while it wears out under the load of 7 N.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. T. Klünsner, F. Zielbauer, S. Marsoner, M. Deller, M. Morstein, and C. Mittererd, “Influence of surface topography on early stages on steel galling of coated WC–Co hard metals,” Int. J. Refract. Met. H. Mater. (IJRMHM), 57, 24–30 (2016).10.1016/j.ijrmhm.2016.02.002 ↗
2. P.K. Katiyar, P.K. Singh, R. Singh, and A.L. Kumar, “Modes of failure of cemented tungsten carbide tool bits (WC/Co): A study of wear parts,” Int. J. Refract. Met. H. Mater. (IJRMHM), 54, 27–38 (2016).10.1016/j.ijrmhm.2015.06.018 ↗
3. M. Chandran, F. Sammler, E. Uhlmann, R. Akhvlediani, and A. Hoffman, “Wear performance of diamond coated WC–Co tools with a CrN interlayer,” Diam. Relat. Mater., 73, 47–55 (2017).10.1016/j.diamond.2016.12.001 ↗
4. C. Lorenzo–Martin, O. Ajayi, A. Erdemir, G.R. Fenske, and R. Wei, “Effect of microstructure and thickness on the friction and wear behavior of CrN coatings”, Wear, 302, Nos. 1–2, 963–971 (2013).10.1016/j.wear.2013.02.005 ↗
5. R. Radhika, N. Kumar, S. Dash, D. Arivuoli, and A.K. Tyagi, “Wear mechanism of CrN/NbN superlattice coating sliding against various counterbodies,” Int. J. Refract. Met. H. Mater. (IJRMHM), 41, 547–552 (2013).10.1016/j.ijrmhm.2013.07.005 ↗
6. S.J. Gao, C.F. Dong, H. Luo, K. Xiao, X. Pan, and X Li, “Scanning electrochemical microscopy study on the electrochemical behavior of CrN film formed on 304 stainless steel by magnetron sputtering,” Electrochimica Acta, 114, 233–241 (2013).10.1016/j.electacta.2013.10.009 ↗
7. A.L. Bandeira, R. Trentin, C. Aguzzoli, M.E.H. Maia da Costa, A.F. Michels, I.J.R. Baumvol, M.C.M. Farias, and C.A. Figueroa, “Sliding wear and friction behavior of CrN–coating in ethanol and oil–ethanol mixture,” Wear, 301, Nos. 1–2, 786–794 (2013).10.1016/j.wear.2013.01.111 ↗
8. L. Shan, Y.R. Zhang, Y.X. Wang, J.L. Li, X. Jiang, and J.M. Chen. “Corrosion and wear behaviors of PVD CrN and CrSiN coating in seawater”, Trans Nonferrous Met. Soc. China, 26, No. 1, 175–184 (2016).10.1016/S1003-6326(16)64104-3 ↗
9. X.S. Wan, Y.Y. Shi, J. Ma, H.Q. Li, J. Gong, and C. Sun, “Salt spray corrosion behaviour of CrN coatings deposited by arc ion plating,” Acta Metall. Sinica, 46, No. 5, 600–606 (2010).10.3724/SP.J.1037.2009.00759 ↗
10. B. Podgornik, M. Sedlaček, and D. Mandrino, “Performance of CrN coatings under boundary lubrication,” Tribol. Int., 96, 247–257 (2016).10.1016/j.triboint.2015.12.039 ↗
11. H. Çalişkan, “Effect of test parameters on the micro–abrasion behavior of PVD CrN coatings”, Measurement, 55, 444–451 (2014).10.1016/j.measurement.2014.05.036 ↗
12. D.A. Colombo, M.D. Echeverría, S. Laino, R.C. Dommarco, and J.M. Massone, “Rolling contact fatigue resistance of PVD CrN and TiN coated austempered ductile iron,” Wear, 308, Nos. 1-2, 35–45 (2013).10.1016/j.wear.2013.09.015 ↗
13. Y.X. Ou, J. Lin, S. Tong, H.L. Che, W.D. Sproul, and M.K. Lei, “Wear and corrosion resistance of CrN/TiN superlattice coatings deposited by a combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering,” Appl. Surf. Sci., 351, 332–343 (2015).10.1016/j.apsusc.2015.05.110 ↗
14. X.S. Wan, S.S. Zhao, Y. Yang, J. Gong, and C. Sun, “Effects of nitrogen pressure and pulse bias voltage on the properties of Cr–N coatings deposited by arc ion plating,” Surf. Coat. Tech., 204, No. 11, 1800–1810 (2010).10.1016/j.surfcoat.2009.11.021 ↗
15. T. Polcar, N.M.G. Parreira, and R. Novák, “Friction and wear behaviour of CrN coating at temperatures up to 500°C,” Surf. Coat. Tech., 201, Nos. 9–11, 5228-5235 (2007).10.1016/j.surfcoat.2006.07.121 ↗
16. M. Jiang, N.O. Wood, R. Komanduri, “On chemo-mechanical polishing (CMP) of silicon nitride (Si3N4) workmaterial with various abrasives”, Wear, 220, No. 1, 59–71 (1998).10.1016/S0043-1648(98)00245-2 ↗
17. Y. Daisuke, J. Fujita, and K. Miki, “Fatigue and wear properties of Ti–6Al–4V alloy with Cr/CrN multilayer coating,” Surf. Coat. Tech., 275, 232–238 (2015).10.1016/j.surfcoat.2015.05.014 ↗
18. C. Lorenzo–Martin, O. Ajayi, A. Erdemir, G.R. Fenske, and R. Wei, “Effect of microstructure and thickness on the friction and wear behavior of CrN coatings,” Wear, 302, Nos. 1–2, 963–971 (2013).10.1016/j.wear.2013.02.005 ↗
19. E.E. Vera, M. Vite, R. Lewis, E.A. Gallardo, and J.R. Laguna-Camacho, “A study of the wear performance of TiN, CrN and WC/C coatings on different steel substrates,” Wear, 271, Nos. 9–10, 2116–2124 (2011).10.1016/j.wear.2010.12.061 ↗