journal article·2016-09

Small Energy Multi-Impact and Static Fatigue Properties of Cemented Carbides

Wei Liu, Zhen-hua Chen, Hui-ping Wang, Zhong-jian Zhang, Liang Yao, Ding Chen

Powder Metallurgy and Metal Ceramics· Volume 55· Issue 5-6
Publisher page

Abstract

The small energy multi-impact (SEMI) and static fatigue properties of cemented carbides with different Co content (11, 15, and 18%) are studied. It is established that the cemented carbide with higher cobalt content ensures longer SEMI and static fatigue life, when the impact energy is lower than the impact fracture energy at one time and the static stress is lower than the bending strength (σbb). However, with the same value of λ (the ratio of the impact energy to the impact fracture energy at one time) and θ (the ratio of the static stress to the bending strength), the SEMI and static fatigue life of three alloys decrease with increasing the Co content. It is determined that the cemented carbide with a Co content of 18% has a higher dynamic fatigue and static fatigue sensitivity and corresponding weak fatigue crack propagation resistance, which means that high cobalt alloys need a higher safety factor under operating conditions. The static fatigue life of notched samples is lower than that of smooth samples. When θ equals to 0.8, the fatigue life ratio of three smooth samples and three notched samples (with Co content of 18, 15, and 11%) is approximately 1 : 2 : 7 and 1 : 1 : 2, respectively, indicating that pre-notched samples cover the defects of cemented carbides. The fracture of the hardmetals bearing low energy (SEMI and static fatigue) results from the growth and connection of holes (or coarse WC) and micro-cracks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. G. S. Upadhyaya, Cemented Tungsten Carbides: Production, Properties and Testing, Noyes Publication, Westwood, New Jersey (1999), p. 420.
2. S. Norgren, J. Garcia, A. Blomqvist, and L. Yin, “Trends in the P/M hard metal industry,” Int. J. Refract. Met. Hard Mater., 48, 31–45 (2015).10.1016/j.ijrmhm.2014.07.007 ↗
3. S. Suresh and L. A. Sylva, “Room temperature fatigue crack growth in cemented carbides,” Mater. Sci. Eng., 83, No. 1, L7–L10 (1986).10.1016/0025-5416(86)90187-4 ↗
4. A. Otsuka, K. Tohgo, H. Sugawara, and F. Ueda, “Tension compression fatigue of WC–12%Co hardmetal,” J. Soc. Mater. Sci., 36, No. 401, 135–140 (1987).10.2472/jsms.36.135 ↗
5. L. Lanes, Y. Torres, and M. Anglada, “On the fatigue crack growth behavior of WC–Co cemented carbides: kinetics description, microstructural effects and fatigue sensitivity,” Acta Mater., 50, No. 9, 2381–2393 (2001).10.1016/S1359-6454(02)00071-X ↗
6. H. Mikado, S. Ishihara, N. Oguma, et al. “Effect of stress ratio on fatigue lifetime and crack growth behavior of WC−Co cemented carbide,” Trans. Nonferrous Met. Soc. China, 24, No. 1, s14−s19 (2014).10.1016/S1003-6326(14)63282-9 ↗
7. Z. H. Chen and D. Chen, Modern Powder Metallurgy Principles, Chemical Industry Publication, Beijing (2013), pp. 461–504.
8. Z. J. Zhang, T. Xu, W. Peng, et al., “The influence of pH on thermal fatigue crack propagation behavior of WC–8Co cemented carbide,” Int. J. Refract. Met. Hard Mater., 40, 14–18 (2013).10.1016/j.ijrmhm.2013.01.019 ↗
9. B. Roebuck, C. J. Maderud, and R. Morrell, “Elevated temperature fatigue testing of hardmetals using notched test pieces,” Int. J. Refract. Met. Hard Mater., 26, No. 1, 19 –27 (2008).10.1016/j.ijrmhm.2007.01.007 ↗
10. H. Li, J. Zhao, D. Wang, X. L. Gao, and H. W. Tang, “Three-point bending fatigue behavior of WC–Co cemented carbides,” Mater. Design, 45, 271–278 (2013).10.1016/j.matdes.2012.08.075 ↗
11. J. L. Chermant and F. Osterstock, “Fracture toughness and fracture of WC–Co composite,” J. Mater. Sci., 11, No. 10, 1939–1951 (1976).10.1007/BF00708272 ↗
12. J. A. M. Ferreira, M. A. P. Amaral, F. V. Antunes, and J. D. M. Costa, “A study on the mechanical behaviour of WC–Co hardmetals,” Int. J. Refract. Met. Hard Mater., 27, No. 1, 1–8 (2009).10.1016/j.ijrmhm.2008.01.013 ↗
13. D. Chen, S. Hu, Z. H. Chen, et al., “Study of cemented carbides toughness evaluation by low cycle impact loading,” J. Nat. Sci. Hunan Univ., 41, 102–107 (2014).
14. T. Sailer, M. Herr, G. Sockelh, et al., “Microstructure and mechanical properties of ultrafine-grained hardmetals,” Int. J. Refract. Met. Hard Mater., 2001, 19, No. 4–6, 553–559 (2001).10.1016/S0263-4368(01)00041-5 ↗
15. T. H. Liu, R. Matt, and G. Grathwohl, “Static and cyclic fatigue of 2Y–TZP ceramics with natural flaws,” J. Eur. Ceram. Soc., 11, No. 2, 133–141 (1993).10.1016/0955-2219(93)90044-R ↗
16. S. Jacobs and I. W. Chen, “Mechanical and environmental factors in the cyclic and static fatigue of silicon nitride,” J. Am. Ceram. Soc., 77, No. 5, 1153–1161 (1994).10.1111/j.1151-2916.1994.tb05387.x ↗
17. U. Schleinkofer, H. G. Sockel, K. Gortin, W. Heinrich, “Fatigue of hard metals and cermets-new results and a better understanding,” Int. J. Refract. Met. Hard Mater., 15, No. 1–3, 103–112 (1997).10.1016/S0263-4368(96)00043-1 ↗
18. U. Schleinkofer, H. G. Sockel, P. Schlund, et al., “Behaviour of hard metals and cermets under cyclic mechanical loads,” Mater. Sci. Eng, A, 194, No. 1, 1–8 (1995).10.1016/0921-5093(94)09660-0 ↗
19. U. Schleinkofer, H. G. Sockel, P. Schlund, et al., “Microstructural processes during subcritical crack growth in hardmetals and cermets under cyclic loads,” Mater. Sci. Eng, A, 209, No. 1–2, 103–110 (1996).10.1016/0921-5093(95)10098-9 ↗
20. U. Schleinkofer, F. G. Sockel, K. Gorting, and W. Heinrich, “Fatigue of hard metals and cermets,” Mater. Sci. Eng, A, 209, No. 1–2, 313–317 (1996).10.1016/0921-5093(95)10106-3 ↗
21. M. Tiryakioglu and J. Campbell, “Weibull analysis of mechanical data for castings,” Metall. Mater. Trans. A, 41, No. 12, 3121–3129 (2010).10.1007/s11661-010-0364-6 ↗
22. K. Shiozawa and R. Weertman J., “Studies of nucleation mechanisms and the role of residual stresses in the grain boundary cavitation of a superalloy,” Acta Metall., 31, No. 7, 993–1004 (1983).