journal article·2016-09

Effect of the Coating Type on Retaining SiC Particles in the Composite During Grinding

V. P. Bondarenko, O. V. Evdokimova, A. A. Matveichuk, T. M. Duda

Powder Metallurgy and Metal Ceramics· Volume 55· Issue 5-6
Publisher page

Abstract

The problem of retaining coarse (150 μm) SiC particles in the composite during grinding with a cup diamond wheel with fine grains (20/14 μm) is considered. SiC particles are coated with Co, Ni, Cu, and WC and are referred to as SiC(Co), SiC(Ni), SiC(Cu), and SiC(WC), respectively. The prepared powders are pressed in a steel die with a diameter of 8.15 mm. The compacts are 5–8.5 mm in height. The compacts are sintered in hydrogen at 980–1470°C with holding for 1–2 h. In addition, the samples containing SiC(WC) particles are impregnated with WC + Ni eutectic melt (VN65). Metallographic analysis shows that in the samples containing SiC(Co), SiC(Ni), and SiC(Cu), SiC particles cannot be retained during grinding because of the formation of brittle silicides, when sintering. In case of WC-coated SiC particles, most of the SiC particles do not leave the composite during grinding. When SiC(WC) samples are impregnated with TN65 eutectic mixture, most of the SiC particles do not leave during grinding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. V. P. Bondarenko, Tribotechnical Composites with High-Modular Fillers [in Russian], Nauk. Dumka, Kiev (1987), p. 232.
2. O. A. Agneev, A. E. Belyaev, N. S. Boltovets, et al., Silicon Carbide: Technology, Properties, and Application [in Russian], ISMA, Kharkov (2010), p. 532.
3. N. V. Novikov, V. P. Bondarenko, A. A. Matveichuk, et al., “Effect of the Thickness of Plastic Coatings on the Compaction During Compacting Coarse Powders of Tungsten and Silicon Carbides” in: “New materials and Technologies: Powder Metallurgy, Composite Materials, Protective Coatings, and Welding” (10th International Scientific and Technical Conference, September 12–14, 2012, Minsk), National Academy of Science of Belarus, P. A. Vityaz’ (Ed.), Navuka, Belarus, Minsk (2012), pp. 97–100.
4. N. V. Novikov, V. P. Bondarenko, V. T. Golovchan, A. A. Matveichuk, et al., “Structured porous composite materials of coarse WC particles covered with elastoplastic layers,” Poroshkov. Metallurgiya, No. 35, 126–135 (2012).