journal article·2016-03

Analysing the Twist Extrusion of Porous Blanks Using Modified Theories of Plasticity for Porous Bodies

A. V. Kuz’mov, M. B. Shtern, E. G. Kirkova, Ya. E. Beygel’zimer, D. V. Pavlenko

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 11-12
Publisher page

Abstract

Features of the twist extrusion of blanks containing pores and plane cracks are considered. The effect of flat cracks on the porosity distribution and rate of local loosening during deformation is analyzed. The analysis is conducted using a modified theory of plasticity for porous bodies and the finite-element method. It is established that the porosity distribution is sensitive to the concentration of flat defects. At a certain concentration of plane defects, the porosity distribution is inverted: the porosity is higher at the periphery than at the center. The effect of flat defects on the accumulated strain and, as a result, on the structure refinement is less significant. It is confirmed that using the counter-pressure allows suppressing the growth of defects, reducing the refinement efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Polymer Science and Applications · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Ya. E. Beygel’zimer, V. N. Varyukhin, D. V. Orlov, and S. G. Synkov, Twist Extrusion as a Strain Accumulation Process [in Russian], TEAN, Donetsk (2003), p. 84.
2. Ya. E. Beygel’zimer, V. N. Varyukhin, S. G. Synkov, and D. V. Orlov, “Useful properties of twist extrusion,” Mat. Sci. Engin. A, 503, 14–17 (2009).10.1016/j.msea.2007.12.055 ↗
3. Ya. E. Beygel’zimer, V. N. Varyukhin, R. Kulagin, et al., “Twist extrusion as a technique for structure formation,” in: Proc. 10th Int. Conf. Techn. Plast. (September 25–30, 2011, Aachen, Germany), (2011), pp. 244–248.
4. R. Z. Valiev and I. V. Aleksandrova, Bulk Nanostructured Metallic Materials [in Russian], Akademkniga, Moscow (2007), p. 398.
5. Y. Estrin and A. V. Vinogradov, “Extreme grain refinement by severe plastic deformation: a wealth of challenging science,” Acta Mat., 61, 782–817 (2013).10.1016/j.actamat.2012.10.038 ↗
6. R. Z. Valiev and T. G. Langdon, “The art and science of tailoring materials by nanostructuring for advanced properties using SPD techniques,” Adv. Eng. Mat., 12, 677–691 (2010).10.1002/adem.201000019 ↗
7. A. Bachmaier and R. Pippan, “Generation of metallic nanocomposites by severe plastic deformation,” Int. Mat. Rev., 58, No. 1, 41–62 (2013).10.1179/1743280412Y.0000000003 ↗
8. Yu. N. Podrezov, D. G. Verbilo, and Ya. I. Evich, “The role of shear deformations in consolidating powder materials,” Fiz. Tekh. Vys. Davl., 24, No. 1, 98–108 (2014).
9. Ya. Beygelzimer, Y. Estrin, and R. Kulagin, “Synthesis of hybrid materials by severe plastic deformation: a new paradigm of SPD processing,” Adv. Eng. Mat., 17, 1–9 (2015).10.1002/adem.201500083 ↗
10. Ya. E. Beigel’zimer, A. I. Shevelev, and S. G. Synkov, “Possibilities for compacting specimens of aluminum turnings by screw extrusion,” Powder Metall. Met. Ceram., 43, No. 11, 549–551 (2004).10.1007/s11106-005-0020-7 ↗
11. A. P. Shpak, V. N. Varyukhin, V. I. Tkatch, et al., “Nanostructured Al86Gd6Ni6Co2 bulk alloy produced by twist extrusion of amorphous melt-spun ribbons,” Mat. Sci. Engin., A 425, 172–177 (2006).10.1016/j.msea.2006.03.081 ↗
12. Ya. E. Beygel’zimer, O. V. Mikhailov, A. S. Synkov, et al., “Twist extrusion of powder blanks. I. Numerical analysis using the finite-element method,” Fiz. Tekh. Vys. Davl., 18, No. 1, 69–82 (2008).
13. Ya. E. Beygel’zimer, O. V. Mikhailov, A. S. Synkov, et al., “Twist extrusion of powder blanks. II. Experimental procedure and discussion of results,” Fiz. Tekh. Vys. Davl., 18, No. 2, 92–97 (2008).
14. Ya. E. Beygel’zimer, V. N. Varyukhin, and B. M. Efros, Physical Mechanics of the Hydrostatic Treatment of Materials [in Russian], Donetsk Fiz. Tekh. Inst. NAN Ukrainy, Donetsk (2000), p. 196.
15. M. B. Shtern and O. V. Mikhailov, “TModified models of deformation of plastic and hard-to-deform powders,” Vestnik Nats. Tekh. Univer. Ukr. “Kyiv Politekh. Inst.”, Ser. Mashinobud., No. 62, 13–19 (2011).
16. F. L. DiMaggio and I. S. Sandler, “Material model for granular soils,” J. Eng. Mech., 97, No. 3, 235–250 (1971).
17. V. D. Rud’, Experimental Mechanics of Structurally Heterogeneous Materials [in Ukrainian], Lutsk. Nats. Tekh. Univer., Lutsk (2010), p. 272.
18. M. B. Shtern and V. D. Rud’, Mechanical and Computer Models of Consolidation of Granular Media [in Ukrainian], Lutsk. Nats. Tekh. Univer., Lutsk (2010), p. 232.
19. J. Kergadallan, G. Puente, P. Doremus, and E. Power, “Compression of an axisymmetric part in an instrumented press,” in: Proc. Int. Workshop on Modeling of Metal Powder Forming Processes Grenoble, France (1997), pp. 277–285.
20. S. Shima and M. Oyane, “Plasticity theory for porous metals,” Int. J. Mechan. Sci., 18, No. 6, 285–291 (1976).10.1016/0020-7403(76)90030-8 ↗
21. R. A. Green, “A plasticity theory for porous solids,” Int. J. Mechan. Sci., 14, No. 2, 215–224 (1972).10.1016/0020-7403(72)90063-X ↗
22. I. F. Martynova and M. B. Shtern, “An equation for the plasticity of a porous solid, allowing for true strains of the matrix material,” Powder Metall. Met. Ceram., 17, No. 1, 17–21 (1978).10.1007/BF00795131 ↗
23. M. F. Chang, C. I. Teh, and L. F. Cao, “Critical state strength parameters of saturated clays from the modified Cam-Clay model,” Canad. Geotech. J., 36, No. 5, 876–890 (1999).10.1139/t99-050 ↗
24. M. B. Shtern, A. V. Kuz’mov, and T. I. Pavlova, “Modelling of a spherical indenter impressed into an irreversibly compressible and dilatant material,” Matem. Model. Materialoved., No. 16, 9–16 (2011).
25. V. V. Skorokhod, “Mean square stresses and deformation rates in a deformed viscous porous substance,” Powder Metall. Met. Ceram., 4, No. 12, 984–988 (1965).10.1007/BF00775442 ↗
26. R. Hill, “A self-consistent mechanics of composite ma terials,” Mech. Phys. Sol., 13, 213–222 (1965).10.1016/0022-5096(65)90010-4 ↗