Technological Bases of the Preparation, Structure and Properties of Powder Steels Sintered by Electric Contact Heating of Annular Specimens
Source abstract
Abstract
Test equipment is constructed and technology is developed for electric contact sintering of annular specimens based on iron. The structure and properties of specimens after sintering is studied by metallographic and x-ray methods. It is established that the structure of these specimens is ferrite-bainite-martensite with predominance of the martensitic phase. After electric sintering there are considerable microstresses in the material that increase with an increase in carbon content. A considerable number of randomly arranged dislocations are revealed in sintered annular specimens that are more numerous by two orders of magnitude or more than the number of boundary dislocations. This should be appear in the mechanical properties of sintered specimens. Comparison of the structure and properties of annular and rectilinear specimens of the same composition sintered by electric contact method shows a small difference in these properties. Thus the electric sintering technology developed by us for annular specimens may with appropriate development be introduced into production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Applications · Surface Treatment and Coatings · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. V. Germel', L. O. Andrushchik, S. P. Oshkaderov, et al., Physical Nature of Electric Sintering Processes, Preprint, Institute of Metal Physics, National Academy of Sciences of Ukraine, Kiev (1986).
2. V. Germel', L. O. Andrushchik, S. P. Oshkaderov, et al., “Effect of different heating methods on formation of a porous structure during sintering of iron, ” Poroshk. Metall., No. 1, 40–45 (1987).
3. L. O. Adrushchik, O. M. Balakshina, Yu. V. Kornyushin, et al., “Moving forces and the kinetics of diffusion during sintering of metal powders, ” Metallofizika, 9, No. 2, 32–37 (1987).
4. L. O. Andrushchik, Yu. V. Kornyushin, and S. P. Oshkaderov, “Physical bases of electric contact sintering of powder materials, ” Visnyk AN UkRSR, No. 3, 21–19 (1988).
5. L. O. Andrushchik, Yu. V. Kornyushin, and S. P. Oshkaderov, “Physical nature of processes taking place during electric contact sintering of metal powders, ” Sci. Sintering, 21, No. 1, 3–13 (1989).
6. L. O. Andrushchik, O. N. Balakshina, V. Germel', et al., “Structure and properties of iron sintered by electric contact heating, ” Poroshk. Metall., No. 1, 17–22 (1991).
7. L. O. Andrushchik, Yu. V. Kornyushin, E. Dudrova, et al., “Formation of interparticle junctions during electric contact sintering of metal powders, ” Sci. Sintering, 24, No. 1, 23–31 (1992).
8. L. O. Andrushchik, É. Dudrova, S. P. Oshkaderov, et. al., “Structure and properties of alloys based on iron sintered by electric contact heating, ” Poroshk. Metall., No. 1, 33–41 (1993).
9. L. O. Andrushchik, É. Dudrova, S. P. Oshkaderov, et. al., “Features of the change in structural defectiveness and the properties of powder alloys based on iron under the effect of rapid electric heating, ” Poroshk. Metall., Nos. 7–8, 13–21 (1997).
10. L. V. Boiko and V. I. Andrushechkin, “Sintering of powder materials based on iron under conditions of rapid HFC electric heating, ” Poroshk. Metall., No. 11, 71–75 (1981).
11. U. Pearson, Crystal Chemistry and Physics of Metals and Alloys [Russian translation], Mir, Moscow (1977).
12. V. A. Ivensen, Kinetics of Metal Powder Compaction during Sintering [Russian translation], Metallurgiya, Moscow (1971).
13. L. O. Andrushchik, S. P. Oshkaderov, É. Dudrova, et. al., “Formation of interparticle joints with electric contact sintering of metal powders, ” Metallofizika, 13, No. 10, 110–121 (1991).