journal article·2015-09

Use of Interfacial Exothermic Effect in the Wetting Process, Production of Composites, and Soldering of Ceramic Materials

Yu. V. Naidich, V. P. Krasovskii

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 5-6
Publisher page

Abstract

The wetting of some nonmetals coated with nickel and deposited in vacuum at 700°C using molten aluminum is studied. The sessile drop method and capillary purification are used. The threshold thickness of wetting is 150 nm for most materials and 400 nm for basalt. The high degree of wetting is observed because the metal melt wets better metal coatings than coated nonmetallic materials. Moreover, exothermic reactions to form aluminum nitrides take place in the system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chemical and Physical Properties of Materials · Material Selection and Properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. I. N. Frantsevich and D. M. Karpinos, Fibrous Composite Materials [in Russian], Naukova Dumka, Kiev (1970), p. 402.
2. L. I. Tuchinskii, Composite Materials Produced by Infiltration [in Russian], Metallurgiya, Moscow (1986), p. 208.
3. V. P. Sergeev (ed.), Basalt-Fiber Composite Materials [in Russian], Naukova Dumka, Kiev (1989), p. 165.
4. M. Ksiazek, N. Sobczak, B. Mikulowski, et al., “Influence of surface modification of alumina on bond strength in Al2O3/Al/Al2O3 joints,” J. Mater. Sci., 40, 2513–2517 (2005).10.1007/s10853-005-1984-x ↗
5. T. S. Ivanova, V. P. Krasovskii, P. Shebo, et al., “Wetting of the silicon carbide coating deposited on graphite with aluminum melts and aluminum alloys with silicon,” Adgez. Raspl. Paika Mater., Issue 28, 60–63 (1992).
6. H. Nakae, T. Hane, and T. Sudo, “Equilibrium contact angles in the Ni/Al system,” Trans. JWRI, 30, Special Issue, 27–32 (2001).
7. H. Nakae, K. Nakajima, H. Fujii, et al., “A new method of fabricating intermetallic compound by utilizing interfacial reactions,” in: Proc. Int. Conf. High Temperature Capillarity (May 8–11, 1994, Bratislava, Slovakia), Reprint, Bratislava (1995), 306–310.
8. H. Nakae, H. Fujii, K. Nakajima, and A. Goto, “Infiltration and combustion synthesis of an intermetallic compound Ni3Al,” J. Mater. Sci. Eng., A223, Nos. 1–2, 21–28 (1997).10.1016/S0921-5093(96)10488-3 ↗
9. V. P. Krasovskii, B. D. Kostyuk, and Yu. N. Chuvashov, “Wetting of basalt material with aluminum melt,” Adgez. Raspl. Paika Mater., Issue 33, 31–34 (1997).
10. C. A. Leon and R. A. L. Drew, “The influence of nickel coating on the wettability of aluminum on ceramics,” Composites: Part A, 33, No. 10, 1429–1432 (2002)10.1016/S1359-835X(02)00161-6 ↗
11. Yu. V. Naidich, Yu. N. Chuvashov, N. F. Ishchuk, and V. P. Krasovskii, “Wetting of some nonmetallic materials by aluminum,” Powder Metall. Met. Ceram., 22, No. 6, 481–483 (1983).10.1007/BF00793227 ↗
12. Yu. V. Naidich, B. D. Kostyuk, G. A. Kolesnichenko, et al., Physical Chemistry of Condensed Phases, Superhard Materials, and Their Interfaces [in Russian], Naukova Dumka, Kiev (1975), 15–27.
13. Yu. V. Naidich and V. P. Krasovskii, “Interaction of metal melts with refractory fluorides and development of new refractories for smelting active metals,” in: Relevant Issues of Modern Materials Science [in Russian], in 2 Vols., Vol. 1, Akademperiodika, Kiev (2008), pp. 431–452.
14. Yu. V. Naidich, Contact Phenomena in Metal Melts [in Russian], Naukova Dumka, Kiev (1972), p. 196.
15. K. Landry, S. Kalogeropoulou, and N. Eustathopoulos, “Wettability of carbon by aluminum and aluminum alloys,” J. Mater. Sci. Eng., A254, No. 1–2, 99–111 (1998).10.1016/S0921-5093(98)00759-X ↗
16. K. Landry, S. Kalogeropoulou, N. Eustathopoulos, et al., “Characteristic contact angles in the aluminum/vitreous carbon system,” Scripta Mater., 34, No 6, 841–846 (1996).10.1016/1359-6462(95)00581-1 ↗
17. P. Shen, H. Fujii, T. Matsumoto, and K. Nogi, “Influence of substrate crystallographic orientation on the wettability and adhesion of α-Ai2O3 single crystals by liquid Al and Cu,” J. Mater. Sci., 40, Nos. 9–10, 2329–2333 (2005)10.1007/s10853-005-1954-3 ↗
18. J. J. Brennan and J. A. Pask, “Effect of nature of surfaces on wetting of sapphire by liquid aluminum,” J. Am. Ceram. Soc., 51, No. 10, 569–573 (1968).10.1111/j.1151-2916.1968.tb13324.x ↗
19. A. J. Klinter, G. Mendoza-Suarez, and R. A. L. Drew, “Wetting of pure aluminum and selected alloys on polycrystalline alumina and sapphire,” Mater. Sci. Eng., A495, 147–152 (2008).10.1016/j.msea.2007.10.113 ↗
20. K. Prabriputaloong and M. R. Piggot, “Thin-film studies of the reaction of SiO2 by Al,” J. Am. Ceram. Soc., 53, No. 4, 184–185 (1973).10.1111/j.1151-2916.1973.tb12451.x ↗
21. N. Sobczak, L. Stobierski, M. Ksiazek, et al., “Factors affecting wettability, structure, and chemistry of reaction products in an Al/Si3N4 system,” Trans. JWRI, 30, Special Issue, 39–48 (2001).
22. Y. V. Naidich and N. Y. Taranets, “Wetting of aluminum nitride by liquid metals,” in: Proc. Int. Conf. High Temperature Capillarity (May 8–11, 1994, Bratislava, Slovakia), Reprint, Bratislava (1995), pp. 138–142.
23. A. C. Ferro and B. Derby, “Interface reactions and solubility effects in high temperature wetting: the Al–Si/SiC system,” in: Proc. Int. Conf. High Temperature Capillarity (May 8–11, 1994, Bratislava, Slovakia), Reprint, Bratislava (1995), pp. 59–64.
24. J. T. Tian, J. M. Molina, J. Narciso, et al., “Pressure infiltration of Al and Al–12 wt.% Si alloy into compacts and oxidized SiC particles,” J. Mater. Sci., 40, No. 9–10, 2537–2540 (2005).10.1007/s10853-005-1988-6 ↗
25. O. Kubaschewski and E. Ll. Evans, Metallurgical Thermochemistry, Butterworth-Springer, London (1951).