journal article·2015-09

Behavior of Mo x Cr y Ta z Si2 Solid Solutions During Cyclic Heating in Air

I. V. Kud’, V. V. Pasichnyi, S. A. Ostapenko, L. I. Eremenko, L. S. Likhoded, D. P. Zyatkevich, I. V. Uvarova

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 5-6
Publisher page

Abstract

New oxidation- and heat-resistant materials based on a molybdenum solid solution (MoxCryTazSi2) have been tested by high-temperature cyclic heating and cooling in air in the range 300–1600°C. Compact samples of the solid solutions show high heat resistance. The oxidation resistance of the solid solution samples is much higher than that of MoSi2 in experimental conditions. The oxidation resistance of the solid solution is found to depend on its composition: the oxidation resistance of Mo0.60Cr0.36Ta0.04Si2 is two times higher and of Mo0.90Cr0.18Ta0.02Si2 is one order of magnitude higher than that of MoSi2. The oxidation resistance increases with Cr content up to 18 mol.%, but higher chromium amounts cause the characteristics to degrade because the strength of the protective surface film decreases. The MoSi2 solid solutions may be recommended as heat- and oxidationresistant materials for cyclic operation in air at temperatures up to 1600°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. V. V. Pasichnyi, V. V. Panichkina, P. Ya. Radchenko, et al., “Radiant heating technique for determining the heat resistance of ceramics,” Probl. Prochn., No. 4, 79–87 (2012).
2. V. A. Lavrov, V. Zh. Shemet, and A. B. Goncharuk, “High-temperature oxidation of molybdenum, tungsten, and zirconium disilicides,” in: Silicides (Production, Properties, and Application) [in Russian], Inst. Probl. Materialoved. Nats. Akad Nauk Ukrainy, Kiev (1986), pp. 52–57.
3. A. A. Sharif, “High-temperature oxidation of MoSi2,” J. Mater. Sci., No. 45, 865–870 (2010).10.1007/s10853-009-4012-8 ↗
4. Jiang Xu, Shuyun Jiang, and Yue Wang, “Influence of chromium alloying on the cyclic oxidation behavior of nanocrystalline (MoxCr1–x)5Si3 films at 800°C in air,” ACS Appl. Mater. Interfaces, 2, No. 1, 301–311 (2010).10.1021/am900794f ↗