journal article·2015-11

Synthesis, Characterization, and Sintering of Yttrium Aluminum Garnet Powder Through Double Hydrolysis Approach

Xianxue Li, Tareque Odoom-Wubah, Zhangxu Chen, Bingyun Zheng, Jiale Huang

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 7-8
Publisher page

Abstract

A double hydrolysis approach is first adopted to prepare yttrium aluminum garnet (YAG) powders using Y(NO3)3 · 6H2O and NaAlO2 as raw materials. A variety of techniques, such as thermogravimetry/differential scanning calorimetry (TG/DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are employed to characterize the as-synthesized samples. The results show that pure-phase YAG powders are accurately available at 900 °C and above. Among these, the YAG powders, produced at 1100°C, are elliptic in shape, with an average particle size of ~44 nm. Pellets of pressed YAG powders are sintered in vacuum at 1700°C for 8 h, resulting in a dense and nearly pore-free microstructure with an average grain size of ~7 μm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Glass properties and applications · Solid State Laser Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A. Ikesue, T. Kinoshita, K. Kamata, and K. Yoshida, “Fabrication and optical properties of high-performance polycrystalline Nd : YAG ceramics for solid-state lasers,” J. Am. Ceram. Soc., 78, No. 4, 1033–1040 (1995).10.1111/j.1151-2916.1995.tb08433.x ↗
2. A. Ikesue and Y. L. Aung, “Ceramic laser materials,” Nature photonics, 2, No. 12, 721–727 (2008).10.1038/nphoton.2008.243 ↗
3. J. Lu, K.-i. Ueda, H. Yagi, et al., “Neodymium doped yttrium aluminum garnet (Y3Al5O12) nanocrystalline ceramics-new generation of solid state laser and optical materials,” J. Alloys Compd., 341, No. 1 –2, 220–225 (2002).10.1016/S0925-8388(02)00083-X ↗
4. W. Liu, Y. Zeng, J. Li, et al., “Sintering and laser behavior of composite YAG/Nd:YAG/YAG transparent ceramics,” J. Alloys Compd., 527, No. 0, 66–70 (2012).10.1016/j.jallcom.2012.02.161 ↗
5. X. Li, B. Zheng, T. Odoom-Wubah, and J. Huang, “Co-precipitation synthesis and two-step sintering of YAG powders for transparent ceramics,” Ceram. Int., 39, No. 7, 7983–7988 (2013).10.1016/j.ceramint.2013.03.064 ↗
6. G. Spina, G. Bonnefont, P. Palmero, et al., “Transparent YAG obtained by spark plasma sintering of coprecipitated powder. Influence of dispersion route and sintering parameters on optical and microstructural characteristics,” J. Eur. Ceram. Soc., 32, No. 11, 2957–2964 (2012).10.1016/j.jeurceramsoc.2012.02.052 ↗
7. Y. Lv, W. Zhang, H. Liu, et al., “Synthesis of nano-sized and highly sinterable Nd:YAG powders by the urea homogeneous precipitation method,” Powder Technol., 217, No. 0, 140–147 (2012).10.1016/j.powtec.2011.10.020 ↗
8. J. Li, F. Chen, W. Liu, et al., “Co-precipitation synthesis route to yttrium aluminum garnet (YAG) transparent ceramics,” J. Eur. Ceram. Soc., 32, No. 11, 2971–2979 (2012).10.1016/j.jeurceramsoc.2012.02.040 ↗
9. C. Marlot, E. Barraud, S. Le Gallet, et al., “Synthesis of YAG nanopowder by the co-precipitation method: Influence of pH and study of the reaction mechanisms,” J. Solid State Chem., 191, 114–120 (2012).10.1016/j.jssc.2012.02.063 ↗
10. A. Ikesue, I. Furusato, and K. Kamata, “Fabrication of polycrystal line, transparent YAG ceramics by a solid-state reaction method,” J. Am. Ceram. Soc., 78, No. 1, 225–228 (1995).10.1111/j.1151-2916.1995.tb08389.x ↗
11. L. Wang, H. Kou, Y. Zeng, et al., “The effect of precipitant concentration on the formation procedure of yttrium aluminum garnet (YAG) phase,” Ceram. Int., 38, No. 5, 3763–3771 (2012).10.1016/j.ceramint.2012.01.022 ↗
12. D. Chen, E. H. Jordan, and M. Gell, “Sol–gel combustion synthesis of nanocrystalline YAG powder from metal-organic precursors,” J. Am. Ceram. Soc., 91, No. 8, 2759–2762 (2008).10.1111/j.1551-2916.2008.02505.x ↗
13. H. Gong, D.-Y. Tang, H. Huang, et al., “Crystallization kinetics and characterization of nanosized Nd : YAG by a modified sol-gel combustion process,” J. Cryst. Growth, 362, 52–57 (2013).10.1016/j.jcrysgro.2011.12.087 ↗
14. Y. H. Zhou, J. Lin, M. Yu, et al., “Morphology control and luminescence properties of YAG:Eu phosphors prepared by spray pyrolysis,” Mater. Res. Bull., 38, No. 8, 1289–1299 (2003).10.1016/S0025-5408(03)00141-7 ↗
15. W. Liu, W. Zhang, J. Li, et al., "”Preparation of spray-dried powders leading to Nd : YAG ceramics: The effect of PVB adhesive,” Ceram. Int., 38, No. 1, 259–264 (2012).10.1016/j.ceramint.2011.06.061 ↗
16. N. Jia, X. Zhang, W. He, et al., “Property of YAG : Ce phosphors powder prepared by mixed solvothermal method,” J. Alloys Compd., 509, No. 5, 1848–1853 (2011).10.1016/j.jallcom.2010.10.071 ↗
17. X. Li, H. Liu, J. Wang, et al., “Production of nanosized YAG powders with spherical morphology and nonaggregation via a solvothermal method,” J. Am. Ceram. Soc., 87, No. 12, 2288–2290 (2004).10.1111/j.1151-2916.2004.tb07507.x ↗
18. M. Zarzecka, M. Bucko, J. Brzezinska-Miecznik, and K. Haberko, “YAG powder synthesis by the modified citrate process,” J. Eur. Ceram. Soc., 27, No. 2, 593–597 (2007).10.1016/j.jeurceramsoc.2006.04.113 ↗
19. A. Ikesue and Y. L. Aung, “Synthesis and performance of advanced ceramic lasers,” J. Am. Ceram. Soc., 89, No. 6, 1936–1944 (2006).10.1111/j.1551-2916.2006.01043.x ↗