journal article·2015-11

Three-Layer Al/Al–B4C Composite Material Prepared by Casting and Hot Rolling

Yingshui Yu, Jinchuan Jie, Shuang Zhang, Jinghan Tu, Tingju Li

Powder Metallurgy and Metal Ceramics· Volume 54· Issue 7-8
Publisher page

Abstract

Casting and hot rolling are proposed to verify a semi-continuous casting and hot rolling process to produce a three-layer Al/Al–B 4 C metal-cermet composite. The outer layer is pure Al, the inner layer is Al matrix composite reinforced with B 4 C particles (the mass fraction of Al and B 4 C are 62.36 and 37.64%, respectively). The results show that the reinforced particles are distributed in the inner layer homogeneously, and both layers are sintered together with no pores or flaws. The clad ratios of the composites of 26, 5, 3, and 1 mm are 50.28, 54.67, 61.23, and 57.46%, respectively. The Vickers hardness varies from 46 HV for the outer pure aluminum layer to 158 HV for the inner composite layer in 3 mm specimen, indicating totally different properties in different layers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. F. Yoshid and R. Hino, “Forming limit of stainless steel-clad aluminum sheets under plane stress condition,” J. Mater. Process. Technol., 63, No. 1–3, 66–71 (1997).10.1016/S0924-0136(96)02601-5 ↗
2. W. Miller, L. Zhuang, J. Bottema, A. Wittebrood, P. Smet, et al., “Recent development in aluminum alloys for the automotive industry,” Mater. Sci. Eng.: A, 280, No. 1, 37–49 (2000).10.1016/S0921-5093(99)00653-X ↗
3. J. Sun, X. Song, T. Wang, Y. Yu, M. Sun, Z. Cao, and T. Li, “The microstructure and property of Al–Si alloy and Al–Mn alloy bimetal prepared by continuous casting,” Mater. Lett., 67, No. 1, 21–23 (2012).10.1016/j.matlet.2011.08.112 ↗
4. F. Thevenot, “A review on boron carbide,” Key Eng. Mater., 56–57, 59–88 (1991).10.4028/www.scientific.net/KEM.56-57.59 ↗
5. T. Chapman, D. Niesz, R. Fox, and T. Fawcett, “Wear-resistant aluminum–boron–carbide cermets for automotive brake applications,” Wear, 236, No. 1– 2, 81–87 (1999).10.1016/S0043-1648(99)00259-8 ↗
6. A. Pyzik and I. Aksay, “Microdesigning of B4C–Al cermets,” in: Processing of Ceramic and Metal Matrix Composites ed. by H. Mostaghaci, Pergamon Press, New York (1989), pp. 269–280.10.1016/B978-0-08-037298-3.50031-1 ↗
7. A. Pyzik and D. Beaman, “Al–B–C phase development and effects on mechanical properties of B4C/Al-derived composites,” J.Am. Ceram. Soc., 78, No. 2, 305–312 (1995).10.1111/j.1151-2916.1995.tb08801.x ↗
8. A. J. Pyzik, I. A. Aksay, and M. Sarikaya, Microdesigning of ceramic-metal composites,” in: Microstructures ‘86, Vol. 21, Plenum Press, New York (1987), pp. 44–54.
9. G. de With, “High temperature fracture of boron carbide: Experiments and Simple Theoretical Models,” J. Mater. Sci., 19, 457–466 (1984).10.1007/BF02403232 ↗
10. D. Halverson, A. Pyzik, I. Aksay, and W. Snowden, “Processing of boron carbide–aluminum composites,” J. Am. Ceram. Soc., 72, No. 5, 775–780 (1989).10.1111/j.1151-2916.1989.tb06216.x ↗
11. Li Rongjiu, Ceramic-Metal Composites [in Chinese], Metall. Ind. Press, Beijing, China (1995).
12. G-J. Zhang, Z.-Y. Deng, et al., “Reactive hot-pressing of ZrB2–SiC composites,“ J. Am. Ceram. Soc., 83, No. 9, 2330–2332 (2000).10.1111/j.1151-2916.2000.tb01558.x ↗
13. M. Arbatti, X. Shan, and Z-Y. Cheng, “Ceramic–polymer composites with high dielectric constant,”Adv. Mater., 19, No. 10, 1369–1372 (2007).10.1002/adma.200601996 ↗
14. H. Ikeda, R. Yoshizaki, K. Yoshikawa, et al., “Preparation of Pb-doped Bi–Sr–Ca–Cu–O superconductors by a hot-press method,” Jpn. J. Appl. Phys., 29, Part 2, No. 3, (1990).10.1143/JJAP.29.L430 ↗
15. Z. Yujun and H. Yiqiang, “Property comparison between cold-press and hot-press clutch friction materials,” Non-Met. Mines, No. 2, 51–53 (2005).