‘Fluoroplastic–Multi-Walled Carbon Nanotube’ Composites: Structural, Mechanical, and Tribotechnical Characteristics
Source abstract
Abstract
The paper studies the production of ‘fluoroplastic–carbon nanotube’ composites, analyzes their structure, and determines their mechanical and tribotechnical characteristics. The properties of the composites depending on the reinforcement content are examined. It is established that addition of only 3% carbon nanotubes significantly increases the hardness and Young’s modulus while the wear becomes two orders of magnitude lower under friction without lubrication. The structure of ‘fluoroplastic–carbon nanotube’ composites is analyzed in detail. A mechanism whereby carbon nanotubes influence the mechanical characteristics and wear resistance is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Carbon Nanotubes in Composites · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. W. Kroto, J. R. Heath, S. C. O. Brien, et al., “C60: buckminster fullerene,” Nature, 318, 163–166 (1985).10.1038/318162a0 ↗
2. S. Iijima and T. Ichihahsi, “Helical microtubules of graphitic carbon,” Nature, 315, 56–59 (1991).10.1038/354056a0 ↗
3. S. Iijima, “Single-shell carbon nanotubes of 1-nm diameter,” Nature, 363, 603–608 (1993).10.1038/363603a0 ↗
4. D. S. Bethune, C. H. Kiang, et al., “Cobalt-catalyzed growth of carbon nanotubes with single-atomic-layer walls,” Nature, 363, 605–609 (1993).10.1038/363605a0 ↗
5. V. N. Popov, “Carbon nanotubes: properties and application,” Mat. Sci. Eng., R43, 61–102 (2004).10.1016/j.mser.2003.10.001 ↗
6. J. N. Coleman, U. Khan, et al., “Small but strong: a review of the mechanical properties of carbon nanotube–polymer composites,” Carbon, 44, 1624–1652 (2006).10.1016/j.carbon.2006.02.038 ↗
7. Z. L. Wang, R. P. Gao, P. Poncharal, et al., “Mechanical and electrostatic properties of carbon nanotubes and nanowires,” Mat. Sci. Eng., C16, 3–10 (2001).10.1016/S0928-4931(01)00293-4 ↗
8. J.-P. Salvetat-Delmotte and A. Rubio, “Mechanical properties of carbon nanotubes: a fiber digest for beginners,” Carbon, 40, 1729–1734 (2002).10.1016/S0008-6223(02)00012-X ↗
9. G. Demczyk, Y. M. Wang, J. Cumings, et al., “Direct mechanical measurement of the tensile strength and elastic modules of multi-walled carbon nanotubes,” Mat. Sci. Eng., A334, 173–178 (2002).10.1016/S0921-5093(01)01807-X ↗
10. M. Ganb, B. K. Satapathy, M. Thunga, et al., “Structural interpretation of deformation and fracture behavior of polypropylene/multi-walled carbon nanotube composites,” Alta Mat., 56, 2247–2261 (2008).
11. Y. Show and H. Itabashi, “Electrically conductive materials made from CNT and PTEF,” Diamond Relat. Mater., 17, 602–605 (2008).10.1016/j.diamond.2007.10.011 ↗
12. L. C. Zhand, I. Zarudi, and K. Q. Xiao, “Novel behavior of friction and wear of epoxy composites reinforced by carbon nanotubes,” Wear, 267, 806–811 (2009).
13. J. R. Vail, D. L. Burris, and W. G. Sawyer, “Multifunctionality of single-walled carbon nanotubes– polytetrafluoroethylene nanocomposites,” Wear, 267, 619–624 (2009).10.1016/j.wear.2008.12.117 ↗
14. S. Kanagaraj, F. R. Varanda, T. V. Zhil’tsova, et al., “Mechanical properties of high density polyethylene/carbon nanotube composites,” Compos. Sci. Technol., 67, 3071–3077 (2007).10.1016/j.compscitech.2007.04.024 ↗
15. Hui-juan Zhand, Zhao-zhu Zhand, Fang Guo, et al., “Enhanced wear properties of hybrid PTEF/cotton fabric composites reinforced with functionalized multi-walled carbon nanotubes,” Mat. Chem. Phys., 116, 183–190 (2009).10.1016/j.matchemphys.2009.03.008 ↗
16. Fu Tieyuan, Mo Zhishen, Han Ping, et al., “Study on factors affecting room temperature transition of polytetrafluoroethylene,” Chin. J. Polym. Sci., No. 2, 170–179 (1986).
17. S. K. Biswas and K. Vijayan, “Friction and wear of PTFE—a review,” Wear, 158, 193–211 (1992).10.1016/0043-1648(92)90039-B ↗
18. Jain and K. Vijayan, “Effect of thermal aging on the crystal structure characteristics of polytetrafluoroethylene,” Polym. Eng. Sci., 47, 1724–1729 (2007).10.1002/pen.20906 ↗
19. G. Kostornov and A. V. Nenakhov, “Effect on composite tribological properties of different fillers and methods for introduction into polytetrafluoroethylene,” Powder Metall. Met. Ceram., 45, No. 11–12, 526– 530 (2006).10.1007/s11106-006-0115-9 ↗
20. L. F. Kolesnichenko, V. V. Polotai, L. V. Zabolotnyi, et al., “Technique for the simultaneous friction and wear study of powder metallurgy materials,” Powder Metall. Met. Ceram., 9, No. 3, 224–228 (1970).10.1007/BF00803955 ↗
21. V. F. Gorban’, É. P. Pechkovskii, and S. A. Firstov, “Microindentation of Ti3SiC2 and Ti3AlC2 nanolaminates with indenters with an angle of 45–85 deg,” Metallofiz. Noveish. Tekhnol., Issue 28, 67–82 (2006).
22. Yu. M. Solonin, P. M. Silenko, E. A. Graivoronskaya, et al., “Nanocomposites based on plastics with additions of SiC nanofibers and multi-walled carbon nanotubes,” Nanostrukt. Materialoved., No. 4, 81–91(2010).