Tribotechnical Characteristics of Ferroabrasive Powders in Magnetic-Abrasion Machining
Source abstract
Abstract
How the frictional force between magnetic-abrasive powders and a Ti alloy surface varies during magnetic-abrasive machining in relation to the technological parameters has been investigated. The specific behavior of the magnetic-abrasive tool in the course of magnetic-abrasive machining has been found to depend on the variation of its mobility as a function of the size and shape the powders, the speed, and the magnetic induction. These factors determine the conditions of particle contact with the machined surface. A magnetic-abrasive tool made of equiaxial particles is demonstrated to have regions of reduced friction with V = 0.66 m/sec, owing to changes in the conditions of particle contact with the workpiece, when the sliding friction is transformed into rolling friction. It is shown that Polimam-M powder has the maximum friction and PR R6M5 has the minimum friction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. V. S. Maiboroda, V. Ya. Shlyuko, and T. Ya. Gridasova, “Salient features of the powder displacement during magnetic-abrasive polishing of workpieces with a complex configuration,” Poroshk. Metall., No. 7, 90–95 (1985).
2. V. S. Maiboroda and O. V. Stepanov, “Shaping of a powder magnetic-abrasive tools during machining of gasturbine engine blades,” Poroshk. Metall., Nos. 1–2, 92–98 (1996).
3. V. S. Maiboroda, “Study of tribotechnical characteristics of the shaping of a powder ferro-abrasive tools during magnetic-abrasive machining,” Metalloznavst. Obr. Mater., Nos. 1–2, 59–63 (1998).
4. V. S. Maiboroda, “Study of the characteristics of internal friction of a mixture of magnetic-abrasive powders in magnetic field,” Poroshk. Metall., Nos. 3–4, 62–67 (2000).
5. V. Ya. Shlyuko, N. L. Taranenko, V. S. Maiboroda, et al., “Determination of the tangential stresses during magnetic-abrasive machining,” Poroshk. Metall., No. 12, 43–46 (1992).
6. V. S. Maiboroda, “Internal friction in a magnetic-abrasive tool,” Nauk. Vysty NTUU “KPI,” No. 3, 40–43 (2000).
7. V. E. Oliker, Powders for Magnetic-Abrasive Machining and Wear-Resistant Coatings [in Russian], Metallurgiya, Moscow (1990).
8. V. S. Maiboroda, “Salient features of the shaping and interaction of powder magnetic-abrasive tool with the surface of workpieces in annular gaps,” Poroshk. Metall., Nos. 7–8, 117–121 (1999).
9. V. S. Maiboroda and V. Ya. Shlyuko, “Laws of motion of a ferroabrasive powder during magnetic-abrasive machining,” Poroshk. Metall., No. 8, 3–8 (1987).
10. V. S. Maiboroda, Magnetic-Abrasive Machining of Special Workpieces (Example: Compressor Blades of Gas-Turbine Expansion Engine), PhD Thesis [in Russian], Kiev (1998).
11. P. I. Yashcheritsyn, M. T. Zabavskii, L. M. Kozhuro, and L. M. Akulovich, Diamond-Abrasive Machining and Hardening of Workpieces in a Magnetic Field [in Russian], Navuka i Tekhnika, Minsk (1988).
12. E. N. Maslov, Theory of Grinding of Materials [in Russian], Mashinostroenie, Moscow (1974).
13. Yu. M. Baron, Magnetic-Abrasive and Magnetic Machining of Workpieces and Cutting Tools [in Russian], Mashinostroenie, Leningrad (1986).
14. V. E. Oliker, Abrasive Machining with Ferromagnetic Powders and Pastes in a Magnetic Field, Preprint [in Russian], Institute for Problems of Materials Science, Acad. Sci. Ukrainian SSR, Kiev (1984).
15. V. S. Maiboroda, O. V. Stepanov, and V. Ya. Shlyuko, “Influence of a magnetic field on the magnetic characteristics of a magnetic-abrasive powder tool,” in: Collection of Scientific and Methodological Studies of the KPI (Kiev Polytechnical Institute) on the Fiftieth Anniversary of the Physics and Engineering Faculty [in Russian], Znaniye, Kiev (1994).
16. V. S. Maiboroda, O. V. Stepanov, N. L. Taranenko, et al., “Rheological characteristics of magnetic-abrasive powders in a magnetic field,” Poroshk. Metall., Nos. 1–2, 62–66 (1994).
17. É. N. Kudinova, Development and Investigation of the Technological Process of Magnetic-Abrasive Machining in the Presence of Gradient Zone of Magnetic Field in the Working Gap, PhD Thesis [in Russian], Minsk (1980).