Interaction Between ZrB2–MoSi2 Cermets and Oxide Melts
Source abstract
Abstract
Contact interaction of ZrB2–MoSi2 materials with oxide melts is studied. The oxide melts are formed during combustion of low-reaction coals containing 30–49% oxides. It is established that ZrB2–MoSi2 composites are wetted by oxide melts (contact angles being 21–5° depending on material composition) at 1600–1700°C in wetting conditions as well as during interaction for 6 h. A thin layer (~5–15 μm) forms in the contact zone, SiO2 and ZrO2 being its main phases. There are a great number of MoO3, CaO, and Fe2O3 oxides at the boundary of these phases. The contact layer serves as a film protecting the composite against further corrosion in oxide melts. The optimum composition of ZrB2–MoSi2 ceramics, which is resistant to corrosion in oxide melts, is determined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Yu. G. Gogotsi and V. A. Lavrenko, Corrosion of High-Performance Ceramics, Springer–Verlag, Berlin (1993), p. 180.
2. O. N. Grigoriev, Yu. G. Gogotsi, and V. I. Subbotin, “Structure and properties of SiC–MeB2 ceramics,” Mater. Res. Soc. Symp. Proc., 481, 249–254 (1998).
3. V. A. Lavrenko, V. D. Dyatel, and E. S. Lugovskaya, “High-temperature reactions of materials of the system ZrB2–ZrSi2 with oxygen,” Powder Metall. Met. Ceram., 21, No. 6, 471–473 (1982).10.1007/BF00801757 ↗
4. O. N. Grigoriev, V. I. Subbotin, Yu. G. Gogotsi, and V. V. Kovalchuk, “Structure and properties of SiC–MeB2 materials,” Mater. Manuf., 7, 99–110 (1998).
5. V. A. Lavrenko, J. Desmaison, A. D. Panasyuk, and M. Desmaison-Brut, “Oxidation resistance of AlN–(TiB2–TiSi2) ceramics in air up to 1450°C,” J. Europ. Ceram. Soc., 23, 357–369 (2003).10.1016/S0955-2219(02)00181-4 ↗
6. V. A. Lavrenko, A. D. Panasyuk, M. Desmaison-Brut, et al., “High-temperature corrosion of AlN-based composite ceramic in air and in combustion products of commercial fuel. Part 2. Corrosion of ceramic composites in the AlN–SiC–TiB2 system in air and in combustion products of kerosene and diesel fuel,” Powder Metall. Met. Ceram., 43, No. 5–6, 295–304 (2004).10.1023/B:PMMC.0000042466.23104.b9 ↗
7. V. A. Lavrenko, J. Desmaison, A. D. Panasyuk, et al. “High-temperature oxidation of AlN–SiC–TiB2 ceramics in air,” J. Eur. Ceram. Soc., 25, No. 10, 1781–1787 (2005).10.1016/j.jeurceramsoc.2004.12.008 ↗
8. V. A. Lavrenko, A. D. Panasyuk, and I. A. Podchernyaeva, “High-temperature oxidation of composite AlN–ZrB2–ZrSi2 ceramics,” Powder Metall. Met. Ceram., 47, No. 1–2, 151–156 (2008).10.1007/s11106-008-0020-5 ↗
9. O. N. Grigoriev, B. A. Galanov, V. A. Lavrenko, et al., “Oxidation of ZrB2–SiC–ZrSi2 ceramics in oxygen,” J. Eur. Ceram. Soc., 30, No. 11, 2397–2405 (2010).10.1016/j.jeurceramsoc.2010.03.016 ↗
10. O. N. Grigoriev, A. D. Panasyuk, and T. V. Dubovik, “Phase interaction between ZrB2–SiC composite ceramics and oxide melts,” Powder Metall. Met. Ceram., 51, No. 9–10, 584–588 (2012).