Phase equilibria in the Ti-Si-B-C quaternary system as a basis for developing new ceramic materials
Source abstract
Abstract
Using the CALPHAD method, a thermodynamic model of the Ti-Si-B-C quaternary system is developed for the first time. Based on calculations of phase equilibria, a way for tetrahedration of this system is proposed. Fragments of the phase diagrams that have not been studied previously are calculated for the boundary ternary systems, with calculations for Si-B-C being performed for the first time. It is concluded that there is no quasiternary eutectic with participation of ZrB2, B4C, and SiC compounds in the Ti-Si-B-C system. It is shown that additions of titanium carbide to the ZrB2 + B4C + SiC mixture should lead to reactions resulting in solid-state formation of graphite (for example, during sintering or hot pressing) or its crystallization as a primary phase during separation from the melt, in a wide range of compositions. It should be taken into account in development of materials from these refractory compounds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. S. S. Ordan’yan, A. I. Dmitriev, E. K. Stepanenko, etc., “SiC-TiB2 system—a base of high-hardness wear-resistant materials,” Powder Metall. Met. Ceram., 26, No. 5, 375–377 (1987).10.1007/BF00797062 ↗
2. S. S. Ordan’yan, “Physicochemical basis for developing composite ceramics based on refractory compounds,” Ogneupory, No. 9–10, 10–14 (1992).10.1007/BF01283387 ↗
3. Yu. P. Udalov, E. E. Valova, and S. S. Ordan’yan, “Production and abrasive properties of eutectic compositions in the B4C-SiC-TiB2 system,” Ogneupory Tekh. Keram., No. 7, 2–3 (1995).
4. G. J. Zhang, X. M. Yue, Z. Z. Jin, et al., “In-situ synthesized TiB2 toughened SiC,” J. Europ. Ceram. Soc., 16, 409–412 (1996).10.1016/0955-2219(95)00116-6 ↗
5. S. Hayun, N. Frage, H. Dilman, et al., “Dense B4C-SiC-TiB2 composites,” in: Proc. Int. Conf. Modern Materials Science: Achievements and Challenges (September 26–30, 2005, Kiev, Ukraine), Inst. Probl. Materialoved. NAN Ukrainy, Kiev (2005), pp. 301–302.
6. S. Hayun, N. Frage, H. Dilman, et al., “Synthesis of dense B4C-SiC-TiB2 composites,” Ceramic Trans., 178, 37–44 (2006).10.1002/9781118408100.ch3 ↗
7. G. Hilz and H. Holleck, “Structure and effects of interfaces in TiC-TiB2-B4C-SiC nanosize multilayer systems,” Int. J. Refract. Met. Hard Mater., 14, No. 1–3, 97–104 (1996).10.1016/0263-4368(96)83422-6 ↗
8. T. B. Massalski, H. Okamoto, P. R. Subramanian, et al., Binary Alloy Phase Diagrams, Vol. 1–3, ASM International, Materials Park, Ohio (1990).
9. H. Werheit, U. Kuhlmann, M. Laux, et al., “Structural and electronic properties of carbon-doped p-rhombohedral boron,” Phys. Stat. Sol., B179, 489–511 (1993).10.1002/pssb.2221790223 ↗
10. P. Villars and L. D. Calvert, Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, Vol. 1–3, ASM International, Materials Park, Ohio (1985).
11. P. Villars and L. D. Calvert, Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, 2nd ed., Vol. 1–4, ASM International, Materials Park, Ohio (1991).
12. F. A. Shunk, Constitution of Binary Alloys: Second Supplement, McGraw-Hill, New York (1969).
13. R. P. Elliott, Constitution of Binary Alloys: First Supplement, McGraw-Hill, New York (1965).
14. J. Roger, V. Babizhetskyy, J.-F. Halet, et al., “Boron-silicon solid solution: Synthesis and crystal structure of a carbon-doped boron-rich SiB n (n = 30) compound,” J. Solid State Chem., 177, No. 11, 4167–4174 (2004).10.1016/j.jssc.2004.07.004 ↗
15. J. Groebner, H. L. Lukas, and F. Aldinger, “Thermodynamic calculation of the ternary system Al-Si-C,” Calphad, 20, 247–254 (1996).10.1016/S0364-5916(96)00027-2 ↗
16. P. T. B. Shaffer, “The SiC phase in the system SiC-B4C-C,” Mater. Res. Bull., 4, No. 3, 213–220 (1969).10.1016/0025-5408(69)90058-0 ↗
17. B. Kasper, Thesis, Max Planck Institute, PML, Stuttgart (1996).
18. T. L. Aselage, D. R. Tallant, and J. H. Gieske, “Preparation and properties of icosahedral borides,” in: Proc. NATO Advanced Research Workshop: The Physics and Chemistry of Carbides, Nitrides and Borides (Manchester (UK), September 1989), NATO ASI Ser., Ser. E: Applied Sciences, Vol. 185, Manchester (1990), pp. 97–111.
19. W. Jeitschko and H. Nowotny, “The crystal structure of Ti3SiC2⎯a new type of complex carbide,” Monatsh. Chem., 98, 329–337 (1967).10.1007/BF00899949 ↗
20. A. S. Ramos, C. A. Nunes, G. Rodrigues, et al., “Ti6S12B, a new ternary phase in the Ti-Si-B system,” Intermetallics, 12, No. 5, 487–491 (2004).10.1016/j.intermet.2004.01.001 ↗
21. T. Ya. Velikanova, A. A. Bondar, L. V. Artyukh, et al., “Titanium-boride composites: Influence of alloying on constitution and properties of titanium-boride eutectic alloys,” in: O. N. Senkov, D. B. Miracle, and S. O. Firstov (eds.), Metallic Materials with High Structural Efficiency, Kluwer Academic Publishers, Dordrecht-Boston-London (2004), pp. 259–268.10.1007/1-4020-2112-7_27 ↗
22. Y. A. Chang, S. Chen, F. Zhang, et al., “Phase diagram calculation: past, present, and future,” Progress Mat. Sci., 49, 313–345 (2004).10.1016/S0079-6425(03)00025-2 ↗
23. A. T. Dinsdale, “SGTE data for pure elements,” Calphad, 15, No. 4, 317–425 (1991).10.1016/0364-5916(91)90030-N ↗
24. L. F. S. Dumitrescu, M. Hillert, and B. Sundman, “A reassessment of Ti-C-N based on a critical review of available assessments of Ti-N and Ti-C,” in: TRITA-MAC-0616 (September, 1997), Royal Institute of Technology, Materials Research Center, Stockholm (1997).
25. C. Baetzner, Thesis, Max Planck Institute, PML, Stuttgart (1994).
26. S Fries and HL Lukas, “System B-C,” in: COST 507—Thermochemical Database for Light Metal Alloys, Luxemburg (1998), pp. 126–128.
27. H. J. Seifert, H. L. Lukas, and G. Petzow, “Thermodynamic optimization of the Ti-Si system,” Z. Metallkd., 87, No. 1, 2–13 (1996).
28. H. Bittermann, H. Duschanek, and P. Rogl, “The Ti–B–C system,” in: G. Effenberg (ed.), Phase Diagrams of Ternary Metal-Boron-Carbon Systems, MSI, ASM International, Materials Park, Ohio (1998), pp. 278-287.
29. Y. Yang, Y. A. Chang, and L. Tan, “Thermodynamic modeling and experimental investigation of the Ti-rich corner of the Ti-Si-B system,” Intermetallics, 13, 1110–1115 (2005).10.1016/j.intermet.2005.02.001 ↗
30. Y. Du, J. C. Schuster, H. J. Seifert, et al., “Experimental investigation and thermodynamic calculation of the titanium-silicon-carbon system,” J. Am. Ceram. Soc., 83, No. 1, 197–203 (2000).10.1111/j.1151-2916.2000.tb01170.x ↗
31. H. J. Seifert, Unpublished Results, Max Planck Institute, Stuttgart (1998).