journal article·2010-12

Precipitation-hardened ferritic steels for fast neutron reactors

I. I. Ivanova, A. N. Demidik

Powder Metallurgy and Metal Ceramics· Volume 49· Issue 7-8
Publisher page

Abstract

The paper describes precipitation-hardened ferritic steel developed for the core of fast neutron reactors. The effect of the type and amount of hardening oxide phase on the stress-rupture strength and structure of the material at 700°C is examined. The data are extrapolated to 10,000-hour holding to show a stress-rupture strength of 70 to 80 MPa. The radiation resistance of the steel is determined under ion and neutron irradiation to 100 dpa (neutron fluence 2.6 ⋅ 10 23 n/cm 2 ). The steel has high volume stability and low sensitivity of its mechanical characteristics to radiation. The material does not lose its plasticity after the maximum exposure. The corrosion behavior of the precipitation-hardened steel in Na, Li, Pb, and eutectic Pb–Li melts, Pb–Bi alloys, and Cs and Te vapors is investigated. The corrosion resistance of the steel is practically commensurable with or somewhat higher than that of the best reactor steels EP172 and EP450.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear reactor physics and engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Power Reactors and Sub-critical Blanket Systems with Lead and Lead-Bismuth as Coolant and/or Target Material, IAEA-TECDOC-1348, International Atomic Energy Agency, Vienna, Austria (2003), p. 224.
2. R. G. Ballinger and J. Lim, “An overview of corrosion issues for the design and operation of hightemperature lead- and lead-bismuth-cooled reactor systems,” Nuclear Technol., 147, No. 3, 418–435 (2004).10.13182/NT04-A3540 ↗
3. I. M. Fedorchenko, I. I. Ivanova, É. T. Denisenko, and A. N. Demidik, “Structurization of precipitationhardened steels during thermomechanical treatment,” in: Proc. 5th Int. Conf. Powder Metallurgy [in Russian], Gottwaldow, Czech Republic (1978), pp. 91–96.
4. I. M. Fedorchenko, A. S. Drachinskii, Yu. N. Podrezov, et al., “Relation of the structural state of precipitation-hardened materials with their mechanical properties,” in: Proc. 6th Int. Conf. Powder Metallurgy [in Russian], Poznan, Poland (1979), Vol. 2, pp. 425–437.
5. I. M. Fedorchenko, I. I. Ivanova, A. N. Demidik, et al., “Factors that influence the structurization and properties of precipitation-hardened sintered materials,” in: Proc. 6th Int. Conf. Powder Metallurgy [in Russian], Brno, Czech Republic (1982), pp. 142–148.
6. I. I. Ivanova, A. N. Demidik, A. S. Drachinskii, et al., “Mechanism of plastic deformation and fracture of sintered ion containing dispersed titania particles,” Powder Metall. Met. Ceram., 22, No. 7, 574–578 (1983).10.1007/BF00805657 ↗
7. I. M. Fedorchenko, I. I. Ivanova, A. N. Demidik, et al., “Effect of the deformation rate and temperature on the structure and mechanical properties of precipitation-hardened ferritic steel,” in: Proc. 9th Repub. Conf. Powder Metallurgy [in Russian], Donetsk (1988), pp. 89–93.
8. B. Ya. Pines, “Diffusion and mechanical properties of solids,” Usp. Fiz. Nauk, 76, No. 3, 519 (1962).10.3367/UFNr.0076.196203f.0519 ↗
9. M. V. Pridantsev, Creep-Resistant Ageing Alloys [in Russian], Metallurgiya, Moscow (1973).
10. V. S. Karasev, S. D. Mamchich, Yu. P. Mel’nik-Kutsin, et al., “Effect of neutron and charged-particle irradiation on the radiation resistance of precipitation-hardened ferritic steel,” in: Radiation Effects in Metals and Alloys [in Russian], Alma-Ata (1983), pp. 127–131.
11. I. M. Fedorchenko, I. I. Ivanova, F. N. Demidik, et al., “Effect of irradiation on the structure and properties of precipitation-hardened ferritic steel,” in: Proc. Int. Conf. Radiation Materials Science [in Russian], Alushta (1990), p. 89.
12. I. I. Ivanova, A. N. Demidik, V. V. Popovich et al., “Investigation of corrosion resistance of precipitationhardened ferritic steels for the core of nuclear reactors,” in: Proc. Spec. Meet. Erosion and Corrosion of Nuclear Power Plant Materials, Kiev (1994), pp. 273–278.
13. Y. Kurata, M. Futakawa, and S. Saito, “Compassion of the corrosion behavior of austenitic and ferritic/martensitic steel exposed to static liquid Pb–Bi at 450 and 550°C,” J. Nucl. Mater., 343, 333–340 (2005).10.1016/j.jnucmat.2004.07.064 ↗
14. B. A. Shmatko and A. E. Rusanov, “Oxide protection of materials in lead and bismuth melts,” Fiz. Khim. Mekh. Mater., No. 5, 49–58 (2000).
15. O. I. Eliseeva, V. P. Tsisar, and I. I. Ivanova, “Corrosion behavior of dispersion-strengthened ferritic Fe–12Cr–2Mo steel in lead melt,” Powder Metall. Met. Ceram., 47, No. 9–10, 607–615 (2008).10.1007/s11106-008-9063-x ↗
16. I. I. Ivanova, A. N. Demidik, V. V. Popovich, et al., “Corrosion resistance of ferritic dispersion-hardened steels intended for the hot zone of nuclear reactors,” Powder Metall. Met. Ceram., 36, No. 3–4, 207–211 (1997).10.1007/BF02676092 ↗