journal article·2006-09

Effect of molybdenum additives on the mechanical properties of iron-copper pseudoalloys

P. Ya. Radchenko, O. I. Get’man, V. V. Panichkina, Yu. N. Podrezov, M. G. Andreeva

Powder Metallurgy and Metal Ceramics· Volume 45· Issue 9-10
Publisher page

Abstract

The effect of molybdenum additives (10%) on mechanical properties and the microstructure of iron-copper (Fe-30% Cu) pseudoalloys is investigated. The tensile strength, hardness, and electrical resistivity are determined, and the microstructure of specimens is analyzed quantitatively. It is established that during both solid-and liquid-phase sintering, no solid-phase solutions are formed, and a stable heterophase microstructure develops as the components undergo mutual diffusion. The heterophase nature of structure hinders grain growth of the refractory phase. The grain size of the sintered specimens does not exceed 1–5 µm. The plasticity of Fe-30% Cu-10% Mo pseudoalloys obtained during solid-phase sintering is increased significantly as compared with Fe-Cu alloys, and the elongation is 13.8% at a porosity of about 1%. Specimens produced by liquid-phase sintering experience greater elongation, but during prolonged liquid-phase sintering (more than 10 min), grain growth is restored, and the plasticity of the Fe-Cu-Mo specimens is reduced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. V. V. Panichkina and N. I. Filippov, “The influence of the small diffusion flows on the microstructure in the fine grain W-Cu and Fe-Cu pseudoalloys,” Funct. Mat., No. 2, 274–278 (1999).
2. P. Ya. Padchenko, V. V. Panichkina, O. G. Radchenko, and V. V. Skorokhod, “Consolidation during sintering of fine-grain iron-copper pseudoalloys,” Poroshk. Metall., Nos. 1–2, 22–28 (2000).10.1007/BF02677435 ↗
3. P. Ya. Radchenko, O. G. Radchenko, V. V. Panichkina, and V. V. Skorokhod, “Effect of molybdenum additives on compaction during the sintering of disperse iron-copper pseudoalloys,” Poroshk. Metall., Nos. 3–4, 3–7 (2004).10.1023/B:PMMC.0000035700.48788.8f ↗
4. O. G. Radchenko, P. Ya. Radchenko, V. V. Panichkina, and Yu. N. Podrezov, “Mechanical properties of fine-grain iron-copper pseudoalloys,” Theses Presented at the Thirty-Seventh International Semina “Urgent Strength Problems” [in Russian], Kiev (2001), pp. 151–152.
5. N. I. Filippov, “Effect of heat treatment on the properties of super-fine-grain iron-copper pseudoalloys,” Theses Presented at the International Conference “Latest Technologies in Powder Metallurgy and Ceramics” [in Russian], Kiev (2003), pp. 159–160.
6. I. N. Bogachev, V. P. Vyatkin, and V. A. Strizhak, “Red-shortness of iron-copper alloys,” Izv. Vuzov. Chern. Metall., No. 8, 103–106 (1977).