Structure formation during activated sintering of high-speed steel
Source abstract
Abstract
Features of structure formation during activated sintering of high-speed steel using a boron-containing additive as an activator are studied. It is shown that presence of an activating additive, its composition and content in the charge, determine features of structure formation compared with sintering without an additive. In the temperature range for solid-phase sintering the content of additive in the charge and the ratio of its components have little effect on the average carbide component size. As temperature increases and there is an increase in boron content in the charge sintering is accompanied by both some increase in austenite grain size and development of a significant difference in carbide grain size. The effect of nickel on size reduction of sintered steel structural components is established.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. L. A. Poznyak, Tool Steels [in Russian], Nauk. Dumka, Kiev (1996).
2. L. A. Poznyak, V. I. Ul?sin, K. A. Gogaev, et al., ?Structure formation and properties of powder high-speed steels R6M5K5 and R6M5F3 during sintering and heat treatment,? Poroshk. Metall., No. 9, 79?83 (1991).
3. V. I. Ul?shin, L. A. Poznyak, and S. V. Ul?shin, ?Phase and structural changes during sintering in pressed high-speed steels prepared from powders with different solidification rates,? Poroshk. Metall., Nos. 11?12, 44?53 (1999).10.1007/BF02676189 ↗
4. M. M. Uspenskii, ?Development of the process of liquid-phase sintering for tools made from high-speed steel powders,? in: Powder High-Speed Steels (Structure, Properties, Tool Production Technology), Coll. Sci. Works [in Russian], Nauk. Dumka, Kiev (1990).
5. V. V. Skorokhod and S. M. Solonin, Physical Metallurgy Bases of Powder Sintering [in Russian], Metallurgiya, Moscow (1984).
6. K. M. Kulkarni, A. Ashurst, and M. Svilar, ?Role of additives in full dense sintering of tool steels,? Modern Develop. Powder Met., 13, 93?120 (1981).
7. M. M. Oliviera and J. D. Bolton, ?Sintering of M3/2 high-speed steel modified by the additions of copper, phosphorus and titanium base ceramic additions,? Powder Met., 38, 131 (1995).10.1179/pom.1995.38.2.131 ↗
8. W. C. Zapata, C. E. Da Costa, and J. M. Torralba, ?Wear and thermal behavior of M3 high-speed steel reinforced with NbC composites,? J. Mater. Sci., No. 12, 3219?3225 (1998).10.1023/A:1004324729342 ↗
9. W. R. Breeler, ?Development in molybdenum high-speed cutting steels,? Trans. Amer. Soc. Met., 27, 289?336 (1939).
10. A. K. Shevelev, ?Effect of boron on the structure of high-speed steel,? Zhurn. Tekhn. Fiz., 18, 99?104 (1948).
11. S. M. Vinarov (ed.), Boron, Calcium, Niobium, and Zirconium in Cast Iron and Steel [in Russian], Gos. Sci.-Tech. Izd. Lit. Chernoi i Tsvetnoi Metallurgii, Moscow (1961).
12. G. A. Baglyuk, O. Yu. Kononenko, L. A. Poznyak, and S. N. Kaplya, ?Study by the DTA method of activated sintering of high-speed steel powders,? Poroshk. Metall., Nos. 1?2, 26?29 (1995).
13. Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1975).
14. V. V. Mes?kin, Bases of Steel Alloying [in Russian], Metallurgiya, Moscow (1964).