journal article·2013-01

Behavior of the submicrocrystalline Y–TZP–Al2O3 composite in dry friction with steel

N. L. Savchenko, T. Yu. Sablina, A. G. Melnikov, S. N. Kul’kov

Powder Metallurgy and Metal Ceramics· Volume 51· Issue 9-10
Publisher page

Abstract

The paper discusses the wear resistance, friction coefficient, and structure of friction surfaces of submicron crystalline Y–TZP–Al2O3 composite rubbed against a steel disk counterface at a pressure of 5 MPa in a range of sliding speeds from 1 to 20 m/sec. It is shown that, starting at 2 m/sec, the friction surface is subdivided by a crack network into separate regions within which local spalling occurs at the maximum wear rate and a sliding speed of 5 m/sec. X-ray diffraction reveals inversion (with respect to the initial state) of the peak intensities of the tetragonal phase with random crystalline grain orientation. The degree of this inversion increases with sliding speed. These results are discussed in terms of the effects exerted by the reorientation of martensite-free deformation twins in the tetragonal phase and the formation of a quasi-liquid film on the wear resistance of Y–TZP–Al2O3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. L. Nettleship and R. Stevens, “Tetragonal zirconia polycrystal (TZP)—A review,” Int. J. High Tech. Ceram., No. 3, 1–32 (1987).10.1016/0267-3762(87)90060-9 ↗
2. Y. J. He, A. J. A. Winnubst, A. J. Burggraaf, et al., “Grain-size dependence of sliding wear in tetragonal zirconia polycrystals,” J. Am. Ceram. Soc., 79, No. 12, 3090–3096 (1996).10.1111/j.1151-2916.1996.tb08081.x ↗
3. S. W. Lee, S. H. Hsu, and M. C. Shen, “Wear maps: Zirconia,” J. Am. Ceram. Soc., 76, No. 8, 1937–1947 (1993).10.1111/j.1151-2916.1993.tb08315.x ↗
4. N. L. Savchenko and S. N. Kul’kov, “Friction and wear of Y-TZP and Y-TZP-Al2O3 ceramics in highspeed sliding on steel,” J. Frict. Wear, 30, No. 6, 444–448 (2009).10.3103/S1068366609060129 ↗
5. N. L. Savchenko and S. N. Kul’kov, “Structures formed on the friction surface and the wear mechanisms of zirconia-based ceramics,” Pisma ZhTF, 30, No. 15, 77–83 (2004).
6. B. Kerkwijk, A. J. A. Winnubst, H. Verweij, et al., “Tribological properties of nanoscale alumina–zirconia composites,” Wear, 225–229, 1293 (1999).10.1016/S0043-1648(98)00403-7 ↗
7. B. Basu, J.-H. Lee, and D-Y. Kim, “Development of nanocrystalline wear-resistant Y–TZP ceramics,” J. Am. Ceram. Soc., 87, No. 9, 1771–1774 (2004).10.1111/j.1551-2916.2004.01771.x ↗
8. N. L. Savchenko, P. V. Korolev, A. G. Mel’nikov, et al., “Structure and properties of Y-TZP–Al2O3 composite produced by sinter forging,” Fund. Probl. Sovr. Materialoved., No. 2, 99–101 (2007).
9. A. A. Rusakov, X-Ray Diffraction of Metals [in Russian], Atomizdat, Moscow (1977), p. 480.
10. S. C. Lim and M. F. Ashby, “Wear mechanism maps,” Acta Metal., 35, 1–24 (1987).10.1016/0001-6160(87)90209-4 ↗
11. V. V. Srdic, M. Winterer, and H. Hahn, “Sintering behavior of nanocrystalline zirconia prepared by chemical vapor synthesis,” J. Am. Ceram. Soc., 83, No. 4, 729–736 (2000).10.1111/j.1151-2916.2000.tb01266.x ↗
12. Gang Xu, Ya-Wen Zhang, Chun-Sheng Liao, and Chun-Hua Yan, “Tetragonal-to-monoclinic phase transitions in nanocrystalline rare-earth stabilized zirconia prepared by a mild hydrothermal method,” J. Am. Ceram. Soc., 87, No. 12, 2275–2281 (2004).10.1111/j.1151-2916.2004.tb07504.x ↗
13. A. V. Virkar and R. L. K. Matsumoto, “Toughening mechanism in tetragonal zirconia polycrystalline (TZP) ceramics,” in: S. Somiya, N. Yamamoto, and H. Yanagida (eds.), Advances in Ceramics, Science and Technology of Zirconia III, Vol. 24, American Ceramic Society, Westerville, OH (1988), pp. 653–663.
14. K. M. Prettyman, J.-F. Jue, A. V. Virkar, et al., “Hysteresity effects in 3 mol.% yttria-doped zirconia (tphase),” J. Mater. Sci., No. 27, 4167–4174 (1992).
15. K. Mehta, J. F. Jue, and A. V. Virkar, “Grinding-induced texture in ferroelastic tetragonal zirconia,” J. Am. Ceram. Soc., No. 73, 1777–1779 (1990).
16. P. V. Korolev, N. L. Savchenko, and S. N. Kul’kov, “Texture formation on the friction surface of transformation-toughened ceramic,” Pisma ZhTF, 30, No. 1, 28–34 (2004).
17. G. V. Samsonov, A. L. Borisova, T. G. Zhidkova, et al., Physical and Chemical Properties of Oxides [in Russian], Metallurgiya, Moscow (1978), p. 472.