journal article·2006-07

Vibrodeformation properties of construction, composite, and high-porosity sintered materials

Yu. F. Lugovskoi, S. A. Firstov

Powder Metallurgy and Metal Ceramics· Volume 45· Issue 7-8
Publisher page

Abstract

The indices of ultimate cyclic strain e−1 and vibrodeformability Re (as the product of e−1 and the decrement of material vibrations at this level of deformation) are introduced. Data on the fatigue strength and vibration decrement of traditional structural materials based on titanium, aluminum, magnesium, iron, and copper, as well as composite condensed materials of microlaminate and dispersion-strengthened structure and sintered high-porous materials based on copper powders, fibers, and foamed copper are analyzed. This allowed us to establish advantages of sintered high-porous materials in comparison with compact ones, and to conclude that high-porous materials based on discrete fibers, and foamed metals based on traditional structural materials will have higher e−1 and Re indices than those of compact matrices. As far as the index of vibrostrength Rσ is concerned, sintered high-porous materials will be inferior to the compact materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Engineering Technology and Methodologies · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Yu. K. Favstov, Yu. N. Shul’ga, and A. G. Rakhshtadt, Physical Metallurgy of Rapidly-Damping Alloys [in Russian], Metallurgiya, Moscow (1980).
2. V. V. Rushin, Cohesive Strength of Certain Protective Inorganic Coatings at Room and Elevated Temperatures, PhD Thesis [in Russian], Kiev (1973).
3. É. S. Umanskii and B. A. Lyashenko, “Conditions for equal adhesive and cohesive strengths of heat-resistant coatings,” Kosmich. Issled. na Ukraine, No. 6, 58–64 (1975).
4. G. S. Krivonogov, V. V. Matveev, I. M. Kachanova, et al., “Vibrostrength of turboblade materials,” Probl. Prochn., No. 3, 22–25 (1969).
5. V. T. Troshchenko, V. V. Matveev, B. A. Gryaznov, et al., Bearing Capacity of Blades in Gas-Turbine Engines under Vibratory Loads [in Russian], Nauk. Dumka, Kiev (1981).
6. B. L. Pelekh and B. I. Salyak, Experimental Methods for Investigation of Dynamic Properties of Composite Materials [in Russian], Nauk. Dumka, Kiev (1990).
7. G. S. Pisarenko, A. P. Yakovlev, and V. V. Matveev, Vibroabsorbing Properties of Construction Materials [in Russian], Nauk. Dumka, Kiev (1971).
8. A. P. Yakovlev, Dissipative Properties of Heterogeneous Materials and Systems [in Russian], Nauk. Dumka, Kiev (1985).
9. R.C. Kenneth, J. R. Cavanagh, and R. L. Newman, Vibration-Damping Coatings, Pat. No. 3758233 USA, Publ. January 17 (1972).
10. V. T. Troshchenko and L. A. Sosnovskii, Fatigue Strength of Metals and Alloys: Reference Manual [in Russian], Part 1, Nauk. Dumka, Kiev (1987).
11. V. T. Troshchenko and L. A. Sosnovskii, Fatigue Strength of Metals and Alloys: Reference Manual [in Russian], Part 2, Nauk. Dumka, Kiev (1987).
12. B. A. Movchan and I. S. Malashenko, Vacuum-Deposition of Heat-Resistant Coatings [in Russian], Nauk. Dumka, Kiev (1983).
13. Composite Materials: Reference Manual [in Russian], D. M. Karpinos (ed.), Nauk. Dumka, Kiev (1985).
14. Ya. B. Fridman, Mechanical Properties of Metals. Mechanical Testing. Structural Strength [in Russian], Mashinostroenie, Moscow (1974).
15. G. N. Tret’yachenko, L. V. Kravchuk, R. I. Kuriat, and A. P. Voloshchenko, Bearing Capacity of Gas-Turbine Blades Subject to Nonstationary Thermal and Force Effects [in Russian], Nauk. Dumka, Kiev (1975).
16. Yu. F. Lugovskoi, N. I. Grechanyuk, V. A. Kuz’menko, and L. I. Chernyshev, “Fatigue strength of materials used in the construction of adaptive lasers,” Poroshk. Metall., Nos. 5–6, 100–104 (1995).
17. Composite Materials. Composite Materials with Metallic Matrices [Russian translation], Vol. 4, K. Krider (ed.), Mir, Moscow (1978).
18. Composite Materials. Failure and Fatigue [Russian translation], Vol. 5, L. Brautman (ed.), Mir, Moscow (1978).
19. Composite Materials [in Russian], A. I. Manokhin (ed.), Nauka, Moscow (1981).
20. Yu. F. Lugovskoi, “Energy dissipation in condensed copper-base materials,” Poroshk. Metall., No. 3, 86–89 (1991).
21. Yu. F. Lugovskoi, V. A. Kuz’menko, A. V. Perepelkin, et al., “Effect of structure and cyclic load duration on the fatigue strength of microlaminate condensed materials. I. Experimental relationships,” Poroshk. Metall., Nos. 3–4, 97–103 (1996).
22. Yu. F. Lugovskoi, V. A. Kuz’menko, N. I. Grechanyuk, et al., “Effect of structure on the fatigue strength of dispersion-strengthened copper-base condensates. I. Experimental relationships,” Poroshk. Metall., Nos. 3–4, 93–100 (1998).10.1007/BF02675985 ↗
23. M. Yu. Bal’shin, Scientific Bases of Powder Metallurgy and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972).
24. A. G. Kostornov, Permeable Metallic Fibrous Materials [in Russian], Tekhnika, Kiev (1983).
25. L. I. Gibson and M. F. Ashby, Cellular Solids, 2nd edition, Cambridge University Press, Cambridge (1997).10.1017/CBO9781139878326 ↗
26. V. T. Troshchenko and A. Ya. Krasovskii, “Strength of porous iron under repeated loadings,” Poroshk. Metall., No. 5, 87–92 (1965).
27. Yu. F. Lugovskoi, M. S. Granovskii, A. G. Kostornov, et al., Energy dissipation in high-porosity materials with different porous structures, Energy Dissipation for Vibrating Mechanical Systems: Materials Presented at the 15th Republican Scientific Conference [in Russian], Nauk. Dumka, Kiev (1989), pp. 308–309.
28. A. V. Vdovichenko, V. A. Nazarenko, and Yu. F. Lugovskoi, “Fatigue failure of rolled high-porosity copper-fiber materials subject to resonant bending vibrations,” Poroshk. Metall., No. 1, 96–99 (1991).
29. A. V. Vdovichenko, V. A. Kuz’menko, Yu. F. Lugovskoi, and V. A. Nazarenko, “Fatigue strength of rolled porous copper-fiber-base materials,” Poroshk. Metall., No. 10, 69–72 (1991).
30. A. A. Appolonov, M. S. Granovskii, A. G. Kostornov, et al., “Fatigue of high-porosity copper-base materials, Strength of Structural Materials and Elements at Acoustic and Ultrasonic Load Frequencies: Materials Presented at an International Symposium [in Russian], Nauk. Dumka, Kiev (1986), pp. 16–20.
31. M. S. Granovskii, O. N. Zhigulina, A. G. Kostornov, et al., “Structure and physico-mechanical properties of high-porosity copper of different origin,” Poroshk. Metall., No. 12, 57–61 (1989).
32. T. E. Matikas, P. Karpur, and S. Shamasundar, “Measurement of the dynamic elastic moduli of porous titanium aluminide compacts,” J. Mater. Sci., 32, No. 4, 1099–1103 (1997).10.1023/A:1018503127949 ↗
33. C. S. Liu, Z. G. Zhu, and F. S. Han, “Internal friction of foamed aluminum in the range of acoustic frequencies,” J. Mater. Sci., 33, No. 7, 1769–1775 (1998).10.1023/A:1004380616293 ↗
34. Yu. F. Lugovskoi, “Effect of structure on the elastic modulus of high-porosity copper-base materials, ” Poroshk. Metall., Nos. 3–4, 79–83 (2000).10.1007/BF02678642 ↗
35. I. S. Golovin and Kh. R. Zinning, “Characteristic features of the static and cyclical deformation of high-porosity metallic materials,” Metalloved. Term. Obrab. Met., No. 5, 26–34 (2002).
36. Fatigue Testing at High Loading Frequencies [in Russian], V. A. Kuz’menko (ed.), Nauk. Dumka, Kiev (1979).
37. A. V. Vdovichenko, Study of Elasticity, Unelasticity and Fatigue Strength of Composite Materials with Metal Matrix Intended for Operation under Alternating Loads, PhD Thesis [in Russian], Kiev (1994).