Electrodeposition and morphology of Ni–Co alloy powders by constant and pulsating overpotential electrolysis
Source abstract
Abstract
The polarization dependences are recorded and the conditions of Ni–Co powder formation in amino-chloride electrolyte are found for different proportions of Ni2+/Co2+. Energy-dispersive spectral analysis (EDSA) is used to obtain data on the morphology and elemental composition of Ni–Co alloy powders depending on the Ni2+ and Co2+ ratio in the solution and the type and parameters of applied (controlled potential) current mode (stationary and impulse). It is found out that the increase of the Ni2+/Co2+ ratio in the solution results in the formation of finer powders as well as in higher nickel content of the powder, up to 64%. The application of impulse mode strongly increases both the dispersion (average size of the particles about 3–5 μm) and the powder homogeneity, which leads to lower oxide content of Ni–Co powders (below 2%). The increase in the impulse frequency to 1000 Hz, other conditions being equal, decreases the formation of dendrites and the susceptibility of powder particles to agglomeration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical Analysis and Applications · Electrodeposition and Electroless Coatings · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. L. Nikolov, R. Darkaoui, E. Zhecheva, et al., J. Electroanal. Chem., 429, 157 (1997).10.1016/S0022-0728(96)05013-9 ↗
2. J. Haenen, W. Vischer, and E. Barendrecht, J. Electroanal. Chem., 208, 273 (1986).10.1016/0022-0728(86)80539-3 ↗
3. A. M. Abd El-Halim and R. M. Khalil, Surf. Coat. Technol., 27, 103 (1986).10.1016/0257-8972(86)90121-0 ↗
4. E. Gomez, J. Cobalt Develop. Inst. (Beograd), Jan., 115–06 (2006).
5. E. Barrera, M. P. Pardate, and N. Batina, J. Electrochem. Soc., 147, No. 5, 1787–1796 (2000).10.1149/1.1393435 ↗
6. G. R. Pattanaik, D. K. Pandya, and S. C. Kashyap, J. Electrochem. Soc., 149, No. 7, C363–369 (2002).10.1149/1.1481718 ↗
7. K. I. Popov, M. G. Pavlovic’, and M. D. Maksimovic’, J. Appl. Electrochem., 12, 525 (1982).10.1007/BF00614978 ↗
8. K. I. Popov, Lj M. Djukic’, M. G. Pavlovic’, et al., J. Appl. Electrochem., 9, 527 (1979).10.1007/BF00617565 ↗
9. A. R. Despic’ and K. I. Popov, Modern Aspects of Electrochemistry, Plenum Press, New York (1972), Vol. VII, p. 199.10.1007/978-1-4684-3003-5_4 ↗
10. N. Ibl, Met. Oberflache, 33, No. 2, 51–59 (1979).
11. N. Ibl, Proc. 10th World Congr. Met. Finish (Kyoto), Tokyo (1980), pp. 9–16.
12. K. I. Popov and M. D. Maksimovic’, Modern Aspects of Electrochemistry, Plenum Press, New York (1989), Vol. XIX, p. 183.
13. M. Subramanian, V. Dhanikavelu, and Rama Prabha, Trans. Instit. Met. Finish., 85, No. 5, 274–280 (2007).10.1179/174591907X229644 ↗
14. Q. Huang and E. J. Podlaha, J. Electrochem. Soc., 151, No. 2, C119–C126 (2004).10.1149/1.1637356 ↗
15. T. Ohgai, X. Hoffer, L. Gravier, et al., J. Appl. Electrochem., 34, No. 10, 1007–1012 (2005).10.1023/B:JACH.0000042677.89276.10 ↗
16. Q. Huang, D. Davis, and E. J. Podlaha, J. Appl. Electrochem., 36, No. 8 (2006).10.1007/s10800-005-9098-3 ↗
17. V. D. Jovic, B. M. Jovic, V. Maksimovic, et al., Electrochimica Acta, 52, 4254–4263 (2007).10.1016/j.electacta.2006.12.003 ↗
18. B. P. Yurev and L. A. Golubkov, Tr. Leningrad. Politechn. Inst.., 14, 269 (1969).
19. V. D. Jovic, B. M. Jovic, V. Maksimovic, et al., J. Solid State Electrochem., 10, 959 (2006).10.1007/s10008-005-0047-1 ↗
20. V. D. Jovic, B. M. Jovic, and M. G. Pavlovic, Electrochem. Acta, No. 5, 5468 (2006).
21. C. K. Mital, J. Electrochem. Soc. India, 22, No. 3, 251–256 (1973).
22. B. Mazza, P. Pedeferri, R. Pointelli, et al., Electrochem. Metal., No. 1–4., 441 (1966).
23. N. H. Phan, M. Schwartz, and K. Nobe, J. Appl. Electrochem., 21, No. 8, 672–677 (1991).10.1007/BF01034044 ↗
24. S. Brancovic, F. Wiatrowski, and M. Seigler, J. Cobalt Develop. Inst. (Beograd), Oct., 689–05 (2005).
25. B. Pan, Y. Jang, and K. J. Yang, J. Cobalt Develop. Instit. (Beograd), Oct., 913–06 (2006).
26. A. Martin, A. Chaparro, and L. J. Daza, J. Cobalt Develop. Inst. (Beograd), Oct., 882–07 (2007).
27. A. Hiroki and I. Masanobu, Proc. Techn. Meet. Magnetic, IEE Japan, No. 50–63, 49–52 (2005).
28. D.-Y. Park, K. S. Park, J. M. Ko, et al., J. Electrochem. Soc., 153, No. 12, C814–C821 (2006).10.1149/1.2353792 ↗
29. A. S. Baston, Zaefferer, D. Raabe, et al., Microstructure Physics and Metal Forming, Max-Planck Institute for Iron Research, Düsseldorf (2007), pp. 1–11.