journal article·2014-03

Phase Equilibria During Solidification in the Ti–TiAl–DyAl2–Dy Region of the Ti–Dy–Al System

M. V. Bulanova, Yu. V. Fartushna, K. A. Meleshevich, A. V. Samelyuk

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 11-12
Publisher page

Abstract

Phase equilibria during solidification in the Ti–TiAl–DyAl2–Dy region of the Ti–Dy–Al system are studied by differential thermal analysis, X-ray diffraction, metallography, and electron microprobe analysis. The liquidus and solidus surfaces, vertical sections, and reaction scheme in the solidification range are presented. No ternary compounds are found in the studied composition range. It is shown that DyAl2 undergoes polymorphic transformation at ~1200°C. The αl and α2 phases that coexist only with solid phases in the binary Ti–Al system participate in equilibria with the liquid phase in the ternary Ti–Dy–Al system. The liquidus surface is characterized by the primary solidification fields of the phases based on βTi (β), high-temperature αTi (αh), lowtemperature αTi (αl), Ti3Al (α2), TiAl (γ), Dy2Al, Dy3Al2, DyAl, βDyAl2, αDyAl2, βDy, and αDy. The solidus surface has elven three-phase fields: β + (βDyAl2) + αl, (βDyAl2) + αl + α2, β + αh + (βDyAl2), αh + γ + (βDyAl2), (βDyAl2) + α2 + (αDyAl2), (DyAl) + (Dy3Al2) + (αDyAl2), (αDy) + β + αl, (DyAl2) + α2 + (Dy3Al2), (Dy3Al2) + α2 + (Dy2Al), α2 + αl + (Dy2Al), and αl + (αDy) + (Dy2Al). The first two fields result from invariant four-phase peritectic reactions, LP1 + β + (DyAl2) ⇄ αl and LP2 + αl + (βDyAl2) ⇄ α2 proceeding at 1130 ± 5°C and 1180 ± 7°C, respectively. The next eight three-phase fields result from invariant four-phase transition reactions: LU1 + β ⇄ αh + (βDyAl2) at 1325 ± 8°C, LU2 + αh ⇄ γ + (βDyAl2) at 1260°C, LU3 + (βDyAl2) ⇄ α2 + (αDyAl2) at 1060 ± 4°C, LU4 + (DyAl) ⇄ (Dy3Al2) + (αDyAl2) at 1010 ± 9°C, LU5 + (αDy) ⇄ β + αl at 970 ± 4°C, LU6 + (αDyAl2) ⇄ α2 + (Dy3Al2) at 960 ± 8°C, LU7 + (Dy3Al2) ⇄ α2 + (Dy2Al) at 955 ± 16°C, and LU8 + α2 ⇄ αl + (Dy2Al) at ~930°C. The three-phase αl + (αDy) + (Dy2Al) field results from an invariant eutectic process, LE ⇄ αl + (αDy) + (Dy2Al), at 910 ± 15°C. The two-phase region in the solidus surface has a temperature maximum at 1343 ± 5°C, corresponding to the invariant three-phase le1 ⇄ β + (βDyAl2) reaction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Rare-earth and actinide compounds · Inorganic Chemistry and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. N. M. Ulyakova, “Effect of rare earth metals on the mechanical properties and structure of heat-resistant titanium α-alloy,” Metalloved. Term. Obrab. Met., No. 3, 30–32 (1994).
2. Y. Wu, K. Hagihara, and Y. Umakoshi, “Influence of Y-addition on the oxidation behavior of Al-rich γ-TiAl alloys,” Intermetallics, 12, 519–532 (2004).10.1016/j.intermet.2004.01.008 ↗
3. Y. Wu and S. K. Hwang, “Microstructural refinement and improvement of mechanical properties and oxidation resistance in EPM TiAl-based intermetallics with yttrium addition,” Acta Mater., 50, No. 6, 1479–1493 (2002).10.1016/S1359-6454(02)00006-X ↗
4. Y. Wu, S. K. Hwang, S. W. Nam, et al., “The effect of yttrium addition on the oxidation resistance of EPM TiAl-based intermetallics,” Scripta Mater., 48, No. 12, 1655–1660 (2003).10.1016/S1359-6462(03)00134-9 ↗
5. C. T. Yang and C. H. Koo, “Improving the microstructure and high temperature properties of the Ti–40Al–16Nb alloy by the addition of a minor Sc or La-rich Misch metal,” Intermetallics, 12, No. 3, 235–251 (2004).10.1016/j.intermet.2003.10.010 ↗
6. Y. Chen, F. Kong, J. Han, et al., “Influence of yttrium on microstructure, mechanical properties and deformability of Ti–43Al–9V alloy,” Intermetallics, 13, No. 3–4, 263–266 (2005).10.1016/j.intermet.2004.07.014 ↗
7. Y. Songbo, H. Boyun, and Y. Zhimin, “Effect of minor Sc on high temperature mechanical properties of Ti–Al based alloys,” Mater. Sci. Eng., 280A, No. 1, 204–207 (2000).10.1016/S0921-5093(99)00667-X ↗
8. F. S. Sun, C. X. Cao, S. E. Kim, et al., “Effect of Nd on the microstructure and properties of a TiAl alloy,” Scripta Mater., 44, No. 12, 2775–2780 (2001).10.1016/S1359-6462(01)00973-3 ↗
9. S. M. L. Sastry, P. J. Meschter, and J. E. O’Neal, “Structure and properties of rapidly solidified dispersion strengthened titanium alloys. Part I. Characterization of dispersoid distribution, structure, and chemistry,” Metall. Trans., 15A, 1451–1463 (1984).10.1007/BF02648575 ↗
10. S. M. L. Sastry, T. C. Peng, and L. P. Beckerman, “Structure and properties of rapidly solidified dispersion strengthened titanium alloys. Part II. Tensile and creep properties,” Metall. Trans., 15A, 1465–1474 (1984).10.1007/BF02648576 ↗
11. M. Bulanova, Yu. Podrezov, Yu. Fartushnaya, et al., “Structure and properties of as-cast Ti–Dy alloys,” J. Alloys Compd., 370, L10–13 (2004).10.1016/j.jallcom.2003.09.016 ↗
12. M. V. Bulanova, Yu. N. Podrezov, Yu. V. Fartushna, et al., “Separate effects of silicon and tin on the structure and properties of 95Ti–5Dy alloy,” Dokl. NAN Ukrainy, No. 12, 87–92 (2004).
13. M. V. Bulanova, Yu. N. Podrezov, Yu. V. Fartushna, et al., “Common effect of silicon and tin on the structure and properties of Ti–Dy alloys,” Dokl. NAN Ukrainy, No. 4, 86–93 (2005).
14. M. Bulanova, Yu. Podrezov, and Yu. Fartushna, “Phase composition, structure and mechanical properties of Ti–Dy–Si–Sn alloys,” Intermetallics, 14, 435–443 (2006).10.1016/j.intermet.2005.08.004 ↗
15. Yu. V. Fartushna, A. V. Kotko, A. V. Samelyuk, et al., “Influence of thermal conditions on high-temperature mechanical properties of Ti–5Dy–5Si–Sn alloys,” High Temp. Mater. Proc., 25, No. 1–2, 67–73 (2006).10.1515/HTMP.2006.25.1-2.67 ↗
16. M. V. Bulanova, Yu. N. Podrezov, Yu. V. Fartushna, et al., “Phase composition, structure, and mechanical properties of titanium-rich Ti–Dy–Sn alloys,” Dokl. NAN Ukrainy, No. 6, 95–104 (2007).
17. Yu. Fartushna, K. Meleshevich, A. Samelyuk, et al., “The melting diagram of the Ti–Dy–Si system in the Ti–Ti5Si3–Dy5Si3–Dy region,” J. Alloys Compd., 473, 401–407 (2009).10.1016/j.jallcom.2008.05.084 ↗
18. Yu. Fartushna, K. Meleshevich, A. Samelyuk, et al., “The melting diagram of the Ti–Dy–Sn system below 40 at.% Sn,” Int. J. Mater. Res., 101, 1298–1310 (2010).10.3139/146.110408 ↗
19. H. Zhou, W. Liu, S. Yuan, et al., “The 500°C isothermal section of the Al–Dy–Ti ternary system,” J. Alloys Compd., 336, 218–221 (2002).10.1016/S0925-8388(01)01902-8 ↗
20. F. Zhang, Z. Yang, L. Ren, et al., “Determination of partial Ti–Al–Dy ternary diagram at 1000°C,” Zhongguo Xitu Xuebao, 14, No. 3, 211–214 (1996).
21. V. T. Witusiewicz, A. A. Bondar, U. Hecht, et al., “The Al–B–Nb–Ti system. Part III. Thermodynamic reevaluation of the constituent binary system Al–Ti,” J. Alloys Compd., 465, 64–77 (2008).10.1016/j.jallcom.2007.10.061 ↗
22. G. Cacciamani, S. De Negri, A. Saccone, et al., “The Al–R–Mg (R = Gd, Dy, Ho) systems. Part II. Thermodynamic modeling of the binary and ternary systems,” Intermetallics, 11, 1135–1151 (2003).10.1016/S0966-9795(03)00151-1 ↗
23. A. Saccone, A. M. Cardinale, S. Delfino, et al., “Gd–Al and Dy–Al systems: Phase equilibria in the 0 to 66.7 at.% Al composition range,” Z. Metallkd., 91, No. 1, 17–23 (2000).
24. T. B. Massalski, H. Okamoto, P. R. Subramanian, et al., Binary Alloy Phase Diagrams, Metals Park, ASM International, Ohio (1990).
25. H. W. King, “Crystal structure of the elements at 25°C,” Bull. Alloy Phase Diagr., 2, No. 3, 401–402 (1981).10.1007/BF02868307 ↗
26. P. Rogl, Titanium: Physicochemical Properties of Its Compounds and Alloys, IAEA, Vienna (1983), p. 310.
27. K. A. Gschneidner, “Physical properties of the rare earth metals,” Bull. Alloy Phase Diagr., 11, No. 3, 216–224 (1990).10.1007/BF03029283 ↗
28. K. H. J. Buschow and A. S. van der Goot, “The crystal structure of rare-earth aluminum compounds R2Al,” J. Less-Common Met., 24, 117–120 (1971).10.1016/0022-5088(71)90175-5 ↗
29. Yu. R. Sharapov, A. S. Il’yushin, R. S. Torchinova, et al., “Structure and magnetic properties of Dy3Al2 solidified in microgravitation conditions,” Izv. Akad. Nauk SSSR. Metally, No. 1, 191–193 (1988).
30. C. Bècle and R. Lemaire, “Crystalline structures of DyAl and CeAl and other equiatomic compounds of aluminum with rare earth metals,” Acta Crystallogr., 23, 840–845 (1967).10.1107/S0365110X67003779 ↗
31. M. M. Abd-el-Aal, A. S. Ilyushin, A. V. Pechennicov, et al., “The stricture and magnetic properties of compounds of the Dy1–x Gd x Al2 system,” Moscow Univ. Phys. Bull., 42, No. 3, 126–129 (1987).