journal article·2014-01

Production and Properties of Nanostructured Metal-Oxide Lead Zirconate–Titanate Piezoceramics

V. V. Prisedskii, V. M. Pogibko, V. S. Polishchuk

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 9-10
Publisher page

Abstract

Compact ceramic samples of lead zirconate–titanate are sintered from nanocrystalline (d av = = 25 nm) Pb(Zr0.52Ti0.48)O3 powder synthesized by thermal decomposition of an oxalate precursor. Conditions of nanopowder compaction have been found and kinetics of sintering and growth of nanocrystallites and coarser grains formed during consolidation have been studied. The lead zirconate–titanate ceramic samples consolidated from nanopowders are sintered at lower (by 300–350°C) temperatures and have higher (by 25–45%) dielectric and piezoelectric properties as compared to samples fabricated by conventional solid-state technology. Two-level grain structure is formed during sintering: nanocrystallites divided by low-angle boundaries and descending from initial nanocrystalline particles and consolidated coarser micrograins divided by high-angle boundaries. Sintering of the lead zirconate–titanate ceramics from nanocrystalline powders permits controlling the nanoscale size of crystallites and thus the nanostructured features of consolidated material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. B. Jaffe, R. S. Roth, and S. Marzullo, “Piezoelectric properties of lead zirconate–lead titanate solid-solution ceramics,” J. Appl. Phys., 25, No. 6, 809–810 (1954).10.1063/1.1721741 ↗
2. V. V. Prisedskii, Nonstoichiometric Ferroelectrics AIIBIVO3 [in Russian], Knowledge, Donetsk (2011), p. 267.
3. M. D. Glinchuk and A. V. Ragulya, Nanoferroics [in Russian], Naukova Dumka, Kiev (2009), p. 275.
4. Y. Matsuo and H. Sasaki, “Formation of lead zirconate–lead titanate solid solutions,” J. Am. Ceram. Soc., 48, 289–291 (1965).10.1111/j.1151-2916.1965.tb14743.x ↗
5. B. Praveenkumar, G. Sreenivasalu, H. H. Kumar, et al., “Size effect studies on nanocrystalline Pb(Zr0.53Ti0.47)O3 synthesized by mechanical activation route,” Mater. Chem. Phys., 117, 338–342 (2009).10.1016/j.matchemphys.2009.06.032 ↗
6. F. Craciun, M. Dinescu, P. Verardi, and C. Galassi, “Pulsed laser deposition of nanocrystalline lead zirconate–titanate thin films,” Nanotechnology, 10, 81–85 (1999).10.1088/0957-4484/10/1/016 ↗
7. Q. F. Zhou, H. L. W. Chan, and C. L. Choy, “Nanocrystalline powders and fibers of lead zirconate–titanate prepared by the sol-gel process,” J. Mater. Process. Technol., 63, 281–285 (1997).10.1016/S0924-0136(96)02636-2 ↗
8. Y. Faheem and M. Shoaib, “Sol-gel processing and characterization of phase-pure lead zirconate–titanate nanopowders,” J. Am. Ceram. Soc., 89, No. 6, 2034–2037 (2006).10.1111/j.1551-2916.2006.01002.x ↗
9. J. F. Meng, “Raman phonon modes and ferroelectric phase transitions in nanocrystalline lead zirconate–titanate,” Phys. Stat. Sol. (A), 164, 851–862 (1997).10.1002/1521-396X(199712)164:2<851::AID-PSSA851>3.0.CO;2-J ↗
10. G. Garnweitner, J. Hentschel, M. Antonietti, and M. Niederberger, “Nonaqueous synthesis of amorphous powder precursors for nanocrystalline PbTiO3, Pb(Zr,Ti)O3, and PbZrO3,” Chem. Mater., 17, 4594–4599 (2005).10.1021/cm0503376 ↗
11. W. Zhu, Z. Wang, C. Zhao, et al., “Low temperature processing of nanocrystalline lead zirconate–titanate (PZT) thick films and ceramics by a modified sol-gel route,” J. Appl. Phys., 41, 6969–6975 (2002).10.1143/JJAP.41.6969 ↗
12. A. Banerjee and S. Bose, “Free-standing lead zirconate–titanate nanoparticles: low-temperature synthesis and densification,” Chem. Mater., 16, 5610–5615 (2004).10.1021/cm0490423 ↗
13. S. Roy, S. Bysakh, and J. Subrahmanyam, “Metastable face-centered cubic lead zirconate-titanate (PZT) and lead lanthanum zirconate–titanate (PLZT) nanocrystals synthesized by autoignition of metal-polymer gel,” J. Mater. Res., 23, No. 3, 719–724 (2008).10.1557/JMR.2008.0099 ↗
14. M. S. Dash, J. Bera, and S. Ghosh, “Study on phase formation and sintering kinetics of BaTi0.6Zr0.4O3 powder synthesized through modified chemical route,” Alloys Compd., 430, 212–216 (2007).10.1016/j.jallcom.2006.04.059 ↗
15. R. A. Das, A. Pathak, and P. Pramanik, “Low-temperature preparation of nanocrystalline lead zirconate–titanate and lead lanthanum zirconate–titanate powders using triethanolamine,” J. Am. Ceram. Soc., 81, No. 12, 3357–3360 (1998).10.1111/j.1151-2916.1998.tb02784.x ↗
16. Z. Surowiak, M. F. Kupriyanov, and D. Czekaj, “Properties of nanocrystalline ferroelectric PZT ceramics,” J. Eur. Ceram. Soc., 21, 1377–1481 (2001).10.1016/S0955-2219(01)00022-X ↗
17. W. S. Clabaugh, E. M. Swiggard, and R. Gilchrist, “Synthesis of barium titanate from oxalate precursor,” J. Res. Nat. Bur. Stud., 56, No. 5, 289–293 (1956).10.6028/jres.056.037 ↗
18. A. V. Ragulya, O. O. Vasyl’kiv, V. V. Skorokhod, and N. V. Danilenko, “Synthesis and sintering of nanocrystalline barium titanate powder under nonisothermal conditions. IV. Electron microscope study of the evolution of barium titanate powder morphology,” Powder Metall. Met. Ceram., 37, No. 3–4, 137–144 (1998).
19. V. M. Pogibko, V. V. Prisedskii, and I. L. Sidak, “Studying the mechanisms of thermal decomposition of the barium titanate oxalate precursor,” Vopr. Khim. Khim. Tekhnol., No. 1, 110–115 (2010).
20. V. Ischenko, E. Pippel, R. Köferstein, et al., “Barium titanate via thermal decomposition of Ba, Tiprecursor complexes: The nature of the intermediate phases,” Solid State Sci., 9, 21–25 (2007).10.1016/j.solidstatesciences.2006.09.004 ↗
21. V. V. Prisedskii, L. G. Gusakova, and V. V. Klimov, “Initial-stage sintering kinetics of lead zirconate–titanate ceramics,” Neorg. Mater., 12, No. 11, 1995–1999 (1976).
22. R. L. Coble, “Sintering crystalline solids: II. Experimental test of diffusion models in powder compacts,” J. Appl. Phys., 32, No. 5, 793–799 (1961).10.1063/1.1736108 ↗
23. J. R. Grosa, “Nanocrystalline powder consolidation methods,” in: Carl C. Coch (ed.), Nanostructured Materials: Processing, Properties and Applications, William Andrew Inc., New York (2007), p. 173–234.