journal article·2006-03

Carboborosilicide and oxide composite coatings on carbon materials

V. I. Zmii, G. N. Kartmazov, N. F. Kartsev, S. G. Ruden’kii, N. S. Poltavtsev

Powder Metallurgy and Metal Ceramics· Volume 45· Issue 3-4
Publisher page

Abstract

Complex carboborosilicide and oxide coatings on carbon materials prepared by vacuum activated diffusion impregnation predominantly through a liquid phase, vacuum fusion, and enamelling are studied. It is established that coating formation from the vapor phase hardly reduces the original porosity of carbon materials. The complex protective coatings developed that are formed by vacuum activated diffusion impregnation through a liquid phase lead to a reduction in the original porosity and gas permeability of carbon materials thereby increasing their high-temperature strength and heat resistance at elevated temperatures. It is shown that higher heat resistance in the temperature range 1800–2000 °C is provided by multilayer coatings based on carbides and borides of silicon, titanium and zirconium, borosilicides of tungsten, hafnium, molybdenum, and also oxides of silicon, aluminum, zirconium, and hafnium. It is established that the protective properties of coatings depend markedly both on their composition, structure, preparation method and on the form of the original carbon materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. V. A. Gurin and V. F. Zelenskii, “Gas-phase methods for preparing carbon and carbon-carbon materials, ” Vopr. Atom. Nauki i Tekhniki, No. 4(76), 13–31 (1999).
2. V. I. Kostikov, G. A. Kravetskii, and V. V. Rodionova, “High-tempereature protective coatings on carbon materials,” Temperaturoystoichivye Funktsional’nye Pokrytiya, Part 1, 16–24, Tula (2001).
3. F. P. Sanin, L. D. Kuchma, E. O. Dzhur, and A. F. Sanin, Rocket Engine Hard Alloys. Materials and Technology [in Ukrainian], Dnipropetrovsk (1999).
4. V. I. Zmii, D. N. Ogienko, and N. S. Poltavtsev, “Protection of carbon materials from high-temperaure gas corrosion,” Poroshk. Metall., Nos. 3–4, 47–50 (1996).10.1007/BF01389602 ↗
5. V. I. Zmii, N. F. Kartsev, N. V. Kovtun, and S. G. Ruden’kii, “Study of forming carboborosilicide heat-resistant coatings on carbon-carbon materials,” Heat-Resistant Frictional Coatings: Proc. Conf. (15–17 May, 2001, Tula), Part 2, Tula (2001).
6. V. S. Ostrovskii, Porosity and Permeability of Carbon Materials [in Russian], Mintsvetmet SSSR, Moscow (1971).
7. L. S. Palatnik, P. G. Cheremskoi, and M. Ya. Fuks, Pores in Films [in Russian], Énergoizdat, Moscow (1982).
8. V. M. Rogozhin, L. V. Yakimova, and Yu. V. Smirnov, “Determination of the porosity of atomized coatings by hydrostatic weighing,” Poroshk. Metall., No. 9, 42–46 (1980).
9. “Articles made from graphite with a ceramic coating,” Amer. Ceram. Soc. Bull., 75, No. 2, 78–79 (1996).
10. M. A. Khusainov, G. M. Demyashev, and M. M. Myshlyakov, “Chemical gas-diffusion solidification and structure of coatings made from sub-group IVa–Va transition metal carbides on graphite,” Izv. Akad. Nauk SSSR, Metally, 4, 152–157 (1991).
11. Yu. D. Yagodkin and V. S. Terent’eva, “Heat’resistant coatings (Review),” Itogi Nauki Tekhniki, Ser. Metallovedenie Term. Obrab., 25, 183–254 (1991).
12. M. V. Sazonova, I. B. Ban’kovskaya, V. N. Filipovich, and G. N. Gorbatova, “Heat-resistant protective coatings for carbon materials,” Izv. Akad. Nauk SSSR, Neorgan Materially, 31, No. 8, 1072–1075 (1995).
13. O. V. Bakun, L. I. Kostrova, S. A. Nochevkin, et al., “Physicochemical features of forming a contact boundary in the systems of graphite-nickel alloy with metals of group Va,” Poroshk. Metall., No. 1, 60–64 (1992).
14. V. S. Dergunova, Yu. V. Levinskii, A. N. Shurshakov, and G. A. Kravetskii, Reaction of Carbon with Refractory Metals [in Russian], Metallurgiya, Moscow (1977).
15. I. I. Patalakh, A. S. Ilyukhin, and N. V. Allaverdova, Composite Materials Based on Carbon Strengthened with Carbon Fibers [in Russian], Moscow (1991).
16. Yu. V. Dzyadikevich and V. E. Oleinik, “Ways of protecting graphite materials from oxidation (review),” Poroshk. Metall., Nos. 3–4, 41–47 (1996).10.1007/BF01389601 ↗
17. V. I. Zmii and S. G. Ruden’kii, “Features of vacuum activated diffusion impregnation of metals: thermodynamics, mechanism and kinetics,” Metallofiz. Noveish. Tekhnol., 20, No. 10, 69–75 (1998).
18. M. I. Pashechko, G. S. Ershov, K. Lenik, and N. A. Us’kova, “Eutectic gradient wear-resistant materials,” Poroshk. Metall., Nos. 7–8, 17–21 (1999).10.1007/BF02676166 ↗