Orbital Forging of Sintered Porous Billets
Source abstract
Abstract
Features of the deformation of sintered porous billets during orbital forging are considered. A schematic of an orbital forge with a roller as a punch is shown. To study orbital forging processes, cylindrical samples made of iron powder and its mixture with 1% of graphite compacted under 550, 700, and 850 MPa and sintered at 1150°C were used. The variation of the relative density and radial strain of billets during orbital forging with the axial strain and the variation of the strain with the shape factor of porous billets are described. It is shown that the total force of orbital forging is much lower (by a factor of 3.0–4.5) than the load needed to form similar billets by conventional free upsetting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. L. T. Kryvda, Theory and Practice of Orbital Forging [in Ukrainian], Avanpost, Kiev (1998), p. 179.
2. I. S. Aliev and V. A. Matviichuk, “Development of local metal forming methods,” Obrab. Met. Davl., No. 1(19), 201–206 (2008).
3. V. A. Matviichuk and I. S. Aliev, Improvement of the Local Rotary Forming Processes Based on Analysis of the Deformability of Metals [in Russian], Donbass Gos. Mashinostr. Akad., Kramatorsk (2009), p. 268.
4. S. P. Gozhii, A. V. Klisko, and A. I. Nosenko, “Intensification of forming structural elements by orbital forging with active friction forces,” Visn. Nats. Tekh. Univer. “Khar. Polytekh. Inst. ,” Issue 45, 113–119 (2011).
5. G. A. Baglyuk, “Free upsetting of heated porous cylindrical specimens,” Powder Metall. Met. Ceram., 27, No. 7, 532–535 (1988).10.1007/BF00799984 ↗
6. V. A. Evstratov, Metal Forming Theory [in Russian], Vyshcha Shkola, Kiev (1981), p. 248.
7. H. A. Kuhn and B. L. Ferguson, Powder Forging, Metal Powder Industries Federation, Princeton, New Jersey (1990), p. 270.
8. R. Narayanasamy, V. Senthilkumar, and K. S. Pandey, “Some features on hot forging of powder metallurgy sintered high strength 4% titanium carbide composite steel preforms under different stress state conditions,” Mater. Design, No. 29, 1380–1400 (2008).10.1016/j.matdes.2006.11.014 ↗
9. Yu. G. Dorofeev and V. V. Sinel’shchikov, “Strain and cracking behavior of preheated cylindrical powder blanks,” Powder Metall. Met. Ceram., 19, No. 1, 20–23 (1980).10.1007/BF00798156 ↗