journal article·2019-09

Effect of Process and Structural Factors on the Mechanical Properties of Titanium Sintered from Titanium Hydrides

I. I. Ivanova, Yu. N. Podrezov, N. A. Krylova, V. I. Danylenko, O. M. Demidyk, V. A. Barabash

Powder Metallurgy and Metal Ceramics· Volume 58· Issue 5-6
Publisher page

Abstract

The paper examines how the preliminary grinding of titanium hydride and the sintering temperature influence the mechanical characteristics of resultant titanium. The powder refinement is the dominant factor that defines the properties of titanium. The strength of titanium increases to 2470 MPa at the highest grinding energy, but its ductility is only 1–2%. The effect of sintering temperature is not so simple: there are two temperature ranges in which temperature dependence of the mechanical properties differs. At low sintering temperatures (780–800°C), the fine and active titanium particles resulting from the dissociation of titanium hydride lead to the rapid formation and growth of interparticle contacts. At high sintering temperatures, the densification of material increases by several times and, hence, impedes the removal of impurities from porous space. Rapid grain growth and dissolution of impurity oxygen in the titanium lattice occur in parallel, sharply increasing the strength and decreasing the ductility of titanium. The ratio of the grain growth and oxygen dissolution rates determines the resultant mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. F.H. Froes and D. Eylon, “Powder metallurgy of titanium alloys,” Mater. Rev., 35, No. 3, 162–182 (1990).10.1179/095066090790323984 ↗
2. O.M. Ivasishin, D.G. Savvakin, and N.M. Gumenyak, “Dehydrogenation of titanium hydride powder and its role in sintering activation,” Metallofiz. Noveish. Tekhnol., 33, No. 7, 899–917 (2011).
3. D.G. Savvakin, M.M. Gumenyak, M.V. Matvienko, and O.G. Molar, “Role of hydrogen in sintering of titanium powders,” Fiz. Khim. Mekh. Mater., No. 5, 32–38 (2011).
4. I.I. Ivanova, N.A. Krylova, O.M. Demidik, V.A. Barabash, and M.V. Karpets, “The influence of the composition and particle size of starting titanium hydride powders on the consolidation of titanium under sintering,” Powder Metall. Met. Ceram., 58, No. 1–2, 13–22 (2019).10.1007/s11106-019-00042-7 ↗
5. Yu. N. Podrezov, and V.I. Danilenko, “Effect of repeated deformation on the mechanical behavior of titanium samples subjected to twist extrusion,” Elektron. Mikrosk. Prochn. Mater., No. 16, 68–79 (2009).
6. S. Nemat-Nasser, W.G. Guo, and J.Y. Cheng, “Mechanical properties and deformation mechanisms of a commercially pure titanium,” Acta Mater., 47, 3705–3720 (1999).10.1016/S1359-6454(99)00203-7 ↗
7. Yu. N. Podrezov and V.I. Danilenko, “Phenomenology of the elastic modulus of severely deformed materials,” Fiz. Tekh. Vys. Davl., 22, No. 4, 47–60 (2012).
8. M. Yu. Balshin, Physical Powder Metallurgy [in Russian], Metallurgizdat, Moscow (1948), p. 332.
9. S.A. Firstov and M. Shlessar (eds.), Structure and Properties of Powder Materials [in Russian], Naukova Dumka, Kyiv (1993), p. 175.
10. A.A. Iliin, B.A. Kolachev, and I.S. Polkin, Titanium Alloys: Composition, Structure, and Properties: Handbook [in Russian], VILS-MATI, Moscow (2009), p. 520.
11. J. C. Williams, A.W. Sommer, and P.P. Tung, “The influence of oxygen concentration on the internal stress and dislocation arrangements in alpha titanium,” Metall. Mater. Trans. B, 3, No. 11, 2979–2984 (1972).
12. Yu. N. Podrezov, V.I. Danilenko, V.A. Nazarenko, Ya. I. Evich, A. V. Vdovichenko, and O. S. Koryak, “Mechanical properties of powder titanium at different production stages. III. Contact formation in powder titanium based on examination of mechanical properties in sintering,” Powder Metall. Met. Ceram., 48, No. 3–4, 201–210 (2009).10.1007/s11106-009-9111-1 ↗
13. Yu. N. Podrezov, V.A. Nazarenko, Ya.I. Evich, A.V. Laptev, A.I. Tolochin, V.I. Danilenko, and O.S. Koryak, “Mechanical properties of powder titanium at different production stages. IV. Mechanical properties and contact formation in powder titanium produced by dynamic hot pressing,” Powder Metall. Met. Ceram., 48, No. 5–6, 295–301 (2009).10.1007/s11106-009-9130-y ↗