journal article·2012-09

Electrochemical oxidation of Al–Mg–Si–Sc alloys with small amounts of zirconium and manganese in 3% NaCl solution

V. A. Lavrenko, M. A. Krasovskii, L. A. Romanova

Powder Metallurgy and Metal Ceramics· Volume 51· Issue 5-6
Publisher page

Abstract

The electrochemical oxidation of α-Al–Mg2Si–Sc alloys doped with small amounts of Zr and Mn in a 3% NaCl solution is studied using the potentiodynamic anodic polarization method, quantitative Auger electron spectroscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, and atomic absorption spectroscopy. It is established that there are two ranges of anodic potential (from stationary to –0.71 V and higher) and, accordingly, two stages of corrosion: (i) formation of protective films containing α-Al2O3, SiO2, and silicium solid phases in a protective film on the samples and passage of Mg2+ and SiO3 2– ions into solution and (ii) formation of lower magnesium silicide, MgSi, in addition to the solid phases. It is shown that zirconium and manganese serve as cathodic areas and substantially inhibit the corrosion of the alloys at the second (basic) stage (especially at Zr and Mn aggregations).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. J. Wloka and S. Virtanen, “Influence of scandium on the pitting behavior of Al–Zn–Mg–Cu alloys,” Acta Mater., 55, 6666–6672 (2007).10.1016/j.actamat.2007.08.021 ↗
2. N. V. Vyazovikina, “Effect of scandium on the corrosion resistance of aluminum and its alloys in a 3% NaCl solution, Zashch. Met., 35, No. 5, 493–499 (1999).
3. M. O. Krasovskii and V. O. Lavrenko, “Electrochemical properties of the primary Al3Sc x Zr1–x phase in deformed scandium-doped aluminum alloys in the Al–Zn–Mg–(Cu) system,” Visn. Nats. Tekh. Univ. Kiev Politekh. Inst., Ser. Mashinobud., 2, 83–87 (2011).
4. V. A. Lavrenko, M. A. Krasovskii, and N. P. Korzhova, “Corrosion resistance of eutectic aluminum alloy (α-Al–Mg2Si) in a 3% NaCl solution,” Dop. NAN Ukrainy, No. 4, 95–99 (2011).
5. G. V. Kharina and V. P. Kochergin, “Corrosion of alloys of aluminum with zinc and rare-earth metals in sodium metavadanate,” Zashch. Met., 32, No. 2, 148–150 (1996).
6. G. V. Kharina, M. V. Kuznetsov, and V. P. Kochergin, “Mechanism and kinetics of anodic oxidation of aluminum and its alloys with zinc and rare-earth metals in a sodium metavadanate solution,” Zashch. Met., 34, No. 5, 539–542 (1998).
7. G. V. Kharina and V. P. Kochergin, “Corrosion electrochemical behavior of Al–Zn–REM alloys in the presence of polyvadanate-ions,” Zashch. Met., 37, No. 6, 636–640 (2001).
8. I. N. Ganiev, B. Sh. Narziev, and N. I. Ganieva, “Corrosion of electrochemical alloys based on the Al–Mg– Sc system,” Zh. Prikl. Khim., 83, No. 4, 634–637 (2010).
9. I. N. Ganiev, “Corrosion electrochemical behavior of especially pure aluminum and its alloy AK1 doped with scandium,” Zh. Prikl. Khim., 77, No. 6, 939–943 (2004).
10. I. N. Ganiev, “High-temperature and electrochemical corrosion of aluminum–scandium alloys,” Zashch. Met., 31, No. 6, 597–600 (1995).