Structure, mechanical and erosive properties of AlN-MoSi2 composite materials and their electrospark-deposited coatings
Source abstract
Abstract
The paper examines the phase composition, structure, and properties of AlN-MoSi2 alloys and associated electrospark-deposited coatings on titanium. It is shown that the most intensive erosion and mass transfer are characteristic of alloys containing 60–80 wt.% MoSi2 and that the erosive characteristics essentially depend on the electrospark treatment parameters. A protective coating with a thickness of 30–40 µm and hardness to 1 GPa is formed on the substrate. There is a thermal impact area up to 300 µm deep and 1.4 GPa hard under the coating. The high-temperature holding of coated samples promotes the rapid formation of heat-resistance phases in the coating and the formation of a secondary structure in the thermal impact area. As a result, this area becomes thicker and the hardness of its material increases up to 1.9 GPa.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Surface Treatment and Coatings · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. G. V. Samsonov, A. D. Verkhoturov, G. A. Bovkun, and V. V. Sychev, Electrospark Alloying of Metal Surfaces [in Russian], Naukova Dumka, Kiev (1976), p. 216.
2. G. A. Bovkun and A. V. Laptev, “Relationship between erosion and mechanical characteristics of fine-grained hard alloy WC-16% Co obtained by solid-phase and liquid-phase consolidation,” Powder Metall. Met. Ceram., 43, No. 5–6, 265–272 (2004); 43, No. 7–8, 383–390 (2004).10.1023/B:PMMC.0000042461.02431.22 ↗
3. V. D. Belik, R. V. Litvin, and M. S. Koval’chenko, “Effect of pulse duration and size of interelectrode interval on electric-spark spraying. I. Effect of pulse duration and size of interelectrode interval on rate of electric-spark transfer,” Powder Metall. Met. Ceram., 45, No. 11–12, 593–598 (2006).10.1007/s11106-006-0124-8 ↗
4. I. A. Podchernyaeva, A. D. Panasyuk, V. A. Lavrenko, et al., “Structure and properties of composite electrospark, laser, and magnetron deposited AlN-TiB2 coatings,” Powder Metall. Met. Ceram., 40, No. 9–10, 501–508 (2001).10.1023/A:1014343807933 ↗
5. M. A. Teplenko, I. A. Podchernyaeva, A. D. Panasyuk, et al., “Structure and wear resistance of coatings on titanium alloy and steels obtained by electrospark alloying with AlN-ZrB2 material,” Powder Metall. Met. Ceram., 41, No. 3–4, 154–161 (2002).10.1023/A:1019834910526 ↗
6. I. A. Podchernyaeva, A. D. Panasyuk, M. A. Teplenko, et al., “Tribological properties of finely-dispersed coatings with electric-spark alloying of materials of the system Ti-Al-N,” Powder Metall. Met. Ceram., 41, No. 11–12, 599–608 (2002).10.1023/A:1022984203788 ↗
7. I. A. Podchernyaeva, A. D. Panasyuk, V. V. Shchepetov, et al., “Surface modification of AL9 alloy by electric-spark alloying with materials of the AlN-Ti(Zr)B2-Ti(Zr)Si2,” Powder Metall. Met. Ceram., 43, No. 3–4, 156–162 (2004).10.1023/B:PMMC.0000035704.78046.e7 ↗
8. V. A. Lavrenko and D. Baxter, “High-temperature corrosion of AlN-based composite ceramic in air in combustion products of commercial fuel. Part 2. Corrosion of ceramic composites in the AlN-SiC-TiB2 system in air and in combustion products of kerosene and diesel fuel,” Powder Metall. Met. Ceram., 43, No. 5–6, 295–304 (2004).10.1023/B:PMMC.0000042466.23104.b9 ↗
9. I. A. Podchernyaeva, O. N. Grigor’ev, V. I. Subbotin, et al., “Wear-resistant layered electrospark coatings based on ZrB2,” Powder Metall. Met. Ceram., 43, No. 7–8, 391–395 (2004).10.1023/B:PMMC.0000048133.84178.97 ↗
10. I. A. Podchernyaeva, A. D. Panasyuk, O. N. Grigor’ev, et al., “Formation model and tribotechnical properties of electrospark-deposited ceramic coatings,” Ogneupory Tekh. Keram., No. 9–10, 2–8 (2004).
11. I. A. Podchernyaeva, D. V. Yurechko, A. D. Panasyuk, and M. A. Teplenko, “Mass transfer and adhesion in electrospark alloying of AL9 alloy with AlN-Ti(Zr)B2-Ti(Zr)Si2 ceramic electrodes,” Powder Metall. Met. Ceram., 43, No. 9–10, 473–479 (2004).10.1007/s11106-005-0008-3 ↗
12. D. V. Yurechko, I. A. Podchernyaeva, A. D. Panasyuk, and O. N. Grigor’ev, “A model for wear-resistant coating on aluminum alloy formed by spark mass transfer of a composite ceramic,” Powder Metall. Met. Ceram., 45, No. 1–2, 40–46 (2006).10.1007/s11106-006-0040-y ↗
13. A. D. Panasyuk, I. A. Podchernyaeva, N. S. Boltovets, et al., “Structure and properties of thin ceramic coatings in the system AlN-TiCrB2,” Powder Metall. Met. Ceram., 45, No. 5–6, 244–250 (2006).10.1007/s11106-006-0071-4 ↗