journal article·2014-03Open access

Elaboration of C/C Composites Based on the Infiltration of a Hydrocarbon Precursor in Supercritical State into the Preform

L. Maille, A. Guette, R. Pailler, Y. Le Petitcorps, P. Weisbecker

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 11-12

Abstract

This paper reports on the development of a new process for the fabrication of a C/C composite for aeronautic and aerospace industries, in order to reduce the infiltration time of the carbon perform. The infiltration of a carbon fibrous preform by means of a hydrocarbon in the supercritical fluid state is done at high temperature in order to obtain a carbon matrix. The microstructure of the pyrocarbon coating is characterized by SEM and TEM. The experimental parameters (temperature, hydrocarbon pressure, residence time) are tuned in order to elaborate the carbon matrix. The best conditions lead to in-depth rapid densification from the top of the preform. After several experiments, the densification has been improved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. R. Naslain, “SiC-matrix composites: nonbrittle ceramics for thermo-structural application,” Int. J. Appl. Ceram. Technol., 2, 75–84 (2005).10.1111/j.1744-7402.2005.02009.x ↗
2. R. Naslain, “Introduction to composite materials,” in: Metallic and Ceramic Matrices [in French], Vol. 2, CNRS Publication, France (1979).
3. H. M. Rietveld, “A profile refinement method for nuclear and magnetic structures,” J. Appl. Crystallogr., 2, 65–71 (1969).10.1107/S0021889869006558 ↗
4. J. Rodriguez-Carvajal, “Recent advances in magnetic structure determination by neutron powder diffraction,” Phys. B: Condens. Matter, 192, 55–69 (1993).10.1016/0921-4526(93)90108-I ↗
5. S. Sambasivan and W. T. Petuskey, “Phase chemistry in the system. Thermochemical review with phase stability diagrams,” J. Mater. Res., 9, 2362–2369 (1994).10.1557/JMR.1994.2362 ↗
6. M. Paulasto, J. K. Kivilahti, and F. J. J. Van Loo, “Interfacial reactions in Ti/Si3N4 and TiN/Si diffusion couples,” J. Appl. Phys., 77, 4412–4416 (1195).10.1063/1.359468 ↗
7. W. B. Hillig, “Making ceramic composites by melt infiltration,” Am. Ceram. Soc. Bull., 73, 56–62 (1994).
8. S. Le Ber, M. A. Dourges, L. Maillé, et al., “Ceramic matrix composites densification by active filler impregnation followed by PIP process,” Ceram. Trans., 215, 113–123 (2010).10.1002/9780470909836.ch11 ↗
9. J. Magnant, L. Maillé, R. Pailler, et al., “Carbon fiber/reaction-bonded carbide matrix for composite materials—manufacture and characterization,” J. Eur. Ceram. Soc., 32, 4497–4505 (2012).10.1016/j.jeurceramsoc.2012.06.009 ↗
10. Q. Le Trequesser, D. Mesguich, E. You, et al., “Supercritical fluid deposition of compositionally uniform yttria stabilized zirconia films,” J. Supercrit. Fluids, 66, 328–332 (2012).10.1016/j.supflu.2011.11.018 ↗
11. F. Christin, “Design, fabrication and application of thermostructural composites (TSC) like C/C–C/SiC and SiC/SiC composites,” Adv. Eng. Mater., 4, 903–912 (2002).10.1002/adem.200290001 ↗
12. X. Bourrat, A. Fillion, R. Naslain, et al., “Regenerative laminar pyrocarbon,” Carbon, 40, 2931–2945 (2002).10.1016/S0008-6223(02)00230-0 ↗