journal article·2005-03

Microindentation and Macroindentation of Titanium Silicon Carbide Ti3SiC2

Biktor F. Gorban’, V. B. Vinokurov, O. N. Grigor’ev, Alexander N. Demidik, Inna I. Ivanova, A. Yu. Koval’, V. A. Kotenko, Engel’s P. Pechkovskii, Sergei A. Firstov

Powder Metallurgy and Metal Ceramics· Volume 44· Issue 3-4
Publisher page

Abstract

We have studied the behavior of titanium silicon carbide Ti3SiC2 in different structural states (one-phase and two-phase, compacted, porous) during microindentation (load up to P = 0.9 N) at room temperature with automatic recording of the loading, holding, and unloading diagrams. We used scanning electron microscopy to study the microstructure around the macrohardness indentations (P = 10–200 N). The results obtained are compared with corresponding data for a number of metallic and ceramic materials. On the P - h loading diagrams (h is the penetration depth), we observe plateaus which are the result of microfracture of the material under the indentor. This reflects the characteristics of titanium silicon carbide: when it is loaded, intergrain and intragrain microcleavage occurs. The plasticity (or pseudoplasticity) of the material can be characterized using the relative work dissipated in the deformation, i.e., expended for irreversible deformation, which can be determined during microindentation: λ p = Ap/A.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. M. W. Barsoum, “The MN+1AXN phases: A new class of solids. Thermodynamically stable nanolaminates,” Prog. Solid St. Chem., 28, 201–281 (2000).10.1016/S0079-6786(00)00006-6 ↗
2. M. W. Barsoum, T. El-Raghy, and M. Radovic, “Ti3SiC2: a layered machinable ductile carbide,” Interceram., 49, No.4, 226–233 (2000).
3. T. El-Raghy, A. Zavaliangos, M. W. Barsoum, and S. R. Kalidindi, “Damage mechanisms around hardness indentations in Ti3SiC2,” J. Amer. Ceram. Soc., 80, No.2, 513–516 (1997).10.1111/j.1151-2916.1997.tb02861.x ↗
4. W. Jeitschko, H. Nowotny, and F. Benesovsky, “Carbon-containing ternary compounds (H-phase),” Monatsh. Chem., 94, 672 (1963).10.1007/BF00913068 ↗
5. R. Pampuch, J. Lis, L. Stobierski, and M. Tymkiewicz, “Solid combustion synthesis of Ti3SiC2,” J. Eur. Ceram. Soc., 5, 283 (1989).10.1016/0955-2219(89)90022-8 ↗
6. J. Lis, R. Pampuch, J. Piekarczyk, and L. Stobierski, “New ceramics based on Ti3SiC2,” Ceramics Int., 19, 219 (1993).10.1016/0272-8842(93)90052-S ↗
7. J. Lis, Y. Miyamoto, R. Pampuch, and K. Tanihata, “Ti3SiC2-based materials prepared by HIP-SHS techniques,” Mat. Let., 22, 163–168 (1995).10.1016/0167-577X(94)00246-0 ↗
8. T. Okano, T. Yano, and T. Iseki, “Synthesis and mechanical properties of Ti3SiC2 ceramic,” Trans. Met. Soc. Jpn., 14A, 597 (1993).
9. J. F. Li., W. Pan, F. Sato, and R. Watanabe, “Mechanical properties of polycrystalline Ti3SiC2 at ambient and elevated temperatures,” Acta Mat., 49, 937–945 (2001).10.1016/S1359-6454(01)00011-8 ↗
10. S. A. Firstov and E. P. Pechkovsky, “Features of strain and fracture of porous titanium-siliceous carbide Ti3SiC2,” Ceramics: Polish Ceram. Bull., 69, 95–100 (2002).
11. N. P. Brodnikovskii, M. P. Burka, and D. G. Verbilo, “Plasticity, strength, and fracture of porous titanium silicon carbide Ti3SiC2,” Poroshk. Metall., Nos. 7–8, 111–120 (2003).
12. V. K. Grigorovich, Hardness and Microhardness of Metals [in Russian], Nauka, Moscow (1976).
13. O. N. Grigor’ev and B. A. Galanov, “Plastic deformation and fracture of diamond under concentrated loading,” Probl. Prochnosti, No. 6, 31–35 (1985).
14. O. N. Grigor’ev, “Study of the plastic and strength properties of superhard materials by microindentation methods,” Poroshk. Metall., No. 1, 74–78 (1982).
15. O. N. Grigor’ev, V. I. Trefilov, and A. M. Shatokhin, “Effect of temperature on fracture of brittle materials under concentrated loading,” Poroshk. Metall., No. 12, 75–82 (1983).
16. C. J. McHargue, “Indentation testing of thin films and hard materials,” Thin Solid Films, 162, 363–375 (1988).
17. M. R. McGurk and T. F. Page, “Using the P-δ2 analysis to deconvolute the nanoindentation response of hard-coated systems,” J. Mater. Res., 14, No.6, 2283–2295 (1999).10.1557/JMR.1999.0305 ↗
18. S. A. Firstov, “Titanium-matrix composites in comparison with ceramic ones,” Advanced Multilayered and Fiber-Reinforced Composites. High Technology, 43, 175–186 (1998).10.1007/978-94-007-0868-6_11 ↗
19. W. C. Oliver and G. M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res., 7, No.6, 1564–1583 (1992).10.1557/JMR.1992.1564 ↗
20. G. A. Gogotsi, “Estimating brittleness of refractories to be tested for heat resistance,” Probl. Prochnosti, No. 10, 26–29 (1973).
21. Yu. V. Milman, B. A. Galanov, and S. I. Chugunova, “Plasticity characteristic obtained through hardness measurement,” Acta Mater., 41, 2523–2532 (1993).10.1016/0956-7151(93)90122-9 ↗