Borided Hot-Worked Powder Materials Based on Iron. Part 3. Wear Resistance and Mechanical Properties
Source abstract
Abstract
The wear resistance of borided powder materials is studied. The maximum wear resistance with dry friction is obtained with carbon-free iron powder borided before hot forging. For abrasive wear operating conditions it is preferable to use borided carbon steel after heat treatment. It is established that coating billets with nickel before boriding provides an increase in wear resistance. Nickel promotes the formation of borides FeB and NiB with high microhardness. The mechanical properties of borided materials are studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Polymer Science and Applications · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. V. D. Zozulya, E. L. Shvedkov, D. Ya. Rovinskii, et al., Dictionary-Handbook for Friction, Wear and Lubrication of Machine Parts [in Russian], Nauk. Dumka, Kiev (1990).
2. V. Yu. Dorofeev and I. V. Selevtsova, “Borided hot-worked powder materials based on iron. I. Kinetics of diffusion boriding of powder materials,” Poroshk. Metall., Nos. 1-2, 24-31 (2001).
3. V. Yu. Dorofeev and I. V. Selevtsova, “Borided hot-worked powder materials based on iron. II. Effect of hot forging schedules on surface layer quality indices and the properties of borided powder materials,” Poroshk. Metall., Nos. 3-4, 64-70 (2001).
4. V. I. Pokhmurskii, V. B. Dalisov, and V. M. Golubets, Increasing the Life of Machine Parts by Means of Diffusion Coatings [in Russian], Nauk. Dumka, Kiev (1980).
5. B. G. Gurevich and E. A. Govyazina, Electrolytic Boriding of Steel Articles [in Russian], Mashinostroenie, Moscow (1976).
6. L. G. Voroshnin, L. S. Lyakhovich, F. G. Lovshenko, and G. F. Protasevich, Chemical Heat Treatment of Cermet Materials [in Russian], Nauka i Tekhnika, Minsk (1977).
7. I. L. Kozlovskii, Yu. V. Turov, and V. N. Maksimenko, “Structure formation of iron-graphite with additions of boron carbide,” in: Powder Metallurgy, No. 14, Minsk (1990).
8. V. N. Antsiferov, V. B. Akimenko, and L. M. Grevnov, Powder Alloyed Steels [in Russian], Metallurgiya, Moscow (1991).
9. R. I. Sarbash, “Fatigue life of specimens made from powder steel under low-cycle stiff loading conditions,” Poroshk. Metall., No. 9, 78-83 (1988).10.1007/BF00796238 ↗