journal article·2000-09

Effect of Scandium and Chromium on the Structure and Heat Resistance of Alloys Based on γ-TiAl

Valerii E. Oliker, Victor I. Trefilov

Powder Metallurgy and Metal Ceramics· Volume 39· Issue 9-10
Publisher page

Abstract

It is established that microalloying of γ-titanium aluminides with scandium provides an increase in heat resistance, structure refinement and modification, and formation of a dispersion-strengthened structure with a coherent bond between the strengthening and matrix phases. Proceeding from this an improvement might be expected in strength characteristics over a wide temperature range. The effect in scandium consists in changing the ratio of Al:Ti thermodynamic activities in the direction of forming aluminum oxide at the alloy surface during oxidation as a result of the deoxidizing effect of scandium and the formation of fine oxide inclusions. As a result of this aluminum does not form oxides within the alloy. The distribution of elements within the microstructure of γ-Ti ― Al with 5%Cr after oxidation at 900°C for 300 h is studied. It is established that the surface scale layer that forms sometimes contains Cr in addition to Al and O. A diffusion mechanism is suggested for realizing the Cr-effect according to which chromium and aluminum ions participate in place of titanium ions in forming Al2O3 ― Cr2O3 scale at the metal ― air atmosphere interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. D. M. Dimiduk, Mat. Sci. and Eng., A263, 281-288 (1999).10.1016/S0921-5093(98)01158-7 ↗
2. F. H. Froes, C. Surynarayana, and D. Eleizer, “Potential of intermetallics to replace superalloys for advanced operation conditions in gas turbines,” J. Mater. Sci., 27, 5133-5140 (1992).10.1007/BF02403806 ↗
3. W. Smarsly and L. Singheiser, “Synthesis properties and application of titanium aluminides,” in: Materials for Advanced Power Engineering, Part 2, D. Coutsouradis et al. (eds.), Kluwer Academic Publishers, New York (1994), pp. 1731-1756.
4. M. Eckert and H. Hilpert, Materials and Corrosion, 48, No. 10/11, 10 (1997).10.1002/maco.19970480103 ↗
5. G. H. Meier et al., Oxidation of High-Temperature International, T. Grobstein and J. Doychak (eds.), PA: TMS, Warrendale (1988).
6. M. P. Brady, J. L. Smialek, D. L. Humphrey, and J. Smith, Acta. Mater., 45, No. 6, 2371 (1997).10.1016/S1359-6454(96)00361-8 ↗
7. G. V. Samsonov, T. G. Bulankova, A. L. Burykina, et al., Physicochemical Properties of Oxides: Handbook [in Russian], Metallurgizdat, Moscow (1969).
8. F. Dettenwanger et al., Mater. Res. Soc. Symp., 364, 98 (1995).
9. G. V. Samsonov and I. M. Vinitskii, Refractory Compounds [in Russian], Metallurgiya, Moscow (1976).
10. V. A. Lebedev, V. I. Kober, and L. F. Yamshchikov, Thermochemistry of Alloys of Rare-Earth and Actinoid Elements: Handbook [in Russian], Metallurgiya, Chelyabinsk (1989).
11. K. Taylor and M. Derby, Physics of Rare-Earth Compounds [Russian translation], Mir, Moscow (1974).
12. R. Wagner, F. Appel, B. Dogan, et al., “Investment casting of TiAl based alloys: Microstructure and data base for gas turbine applications,” in: Materials for Advanced Power Engineering, Part 2, D. Coutsouradis et al. (eds.), Kluwer Academic Publishers, New York (1994).
13. Y-W. Kim, Mater. Sci. and Eng., A192/193, 519 (1995).10.1016/0921-5093(94)03271-8 ↗
14. M. Es-Souni, A. Bartels, and R. Wagner, Mater. Sci. Eng., A192/193, 698 (1995).10.1016/0921-5093(94)03290-4 ↗
15. K. I. Portnoi and N. I. Timofeeva, Oxygen Compounds of Rare-Earth Elements: Handbook [in Russian], Metallurgiya, Moscow (1986).
16. M. P. Brady, W. J. Brindley, J. L. Smialek, and I. E. Lossi, JOM, November, 46-50 (1996).10.1007/BF03223244 ↗
17. L. N. Larikov and V. I. Isaichev, Structure and Properties of Metals and Alloys: Handbook [in Russian], Nauka Dumka, Kiev (1987).
18. E. M. Sokolovskaya and L. S. Guzei, Metal Chemistry [in Russian], Izd. Mosk. Univ., Moscow (1986).
19. N. A. Toropov et al., Composition Diagrams for Refractory Oxide Systems: Handbook, Part 1, Binary Systems [in Russian], Nauka, Leningrad (1985).
20. O. Kubashevsky and B. Hopkins, Oxidation of Metals and Alloys: 2nd ed. [Russian translation], Metallurgiya, Moscow (1965).
21. J. Benar (ed.), Oxidation of Metals, Vol. 2 [Russian translation], Metallurgiya, Moscow (1969).