journal article·2013-07

Contact stresses in the deformation zone and average pressure during asymmetric rolling of metal powders

K. A. Gogaev, G. Ya. Kalutskii, V. S. Voropaev, A. S. Kolpakov

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 3-4
Publisher page

Abstract

Consideration is given to the contact normal stresses in the deformation zone on the drive rolls of different diameters rotating at the same angular speed during asymmetric rolling of iron and electrolytic titanium powders, as well as aluminum granules. The ratio of roll diameters is 1.12 to 1.42. It is established that the normal contact stresses on both rolls are much lower than those during conventional (symmetric) rolling. It is shown that during asymmetric rolling, the contact stress on the larger roll is lower than the stress on the smaller roll, regardless of the material being rolled and the density of the rolled product.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Metallurgy and Material Forming · Engineering Technology and Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. G. Ya. Kalutskii, K. A. Gogaev, and V. S. Voropaev, “Asymmetric rolling of metal powders and granules,” Powder Metall. Met. Ceram., 46, No. 3–4, 197–201 (2007).10.1007/s11106-007-0032-6 ↗
2. G. Ya. Kalutskii, K. A. Gogaev, and V. S. Voropaev, “Prospects of development of rolling of metal powders and granules,” in: Improvement of Forming Processes and Equipment in Metallurgy and Mechanical Engineering [in Russian], Donetsk Gos. Mashinostr. Akadem., Kramatorsk (2007) pp. 508–512.
3. G. Ya. Kalutskii, “Generalized diagrams of contact stresses and angular parameters of the deformation zone in asymmetric rolling of metal powders. Forming of materials,” in: Collected Scientific Papers [in Russian], No. 1 (20), Donetsk Gos. Mashinostr. Akadem., Kramatorsk (2009), pp. 199–204.
4. K. A. Gogaev, G. Ya. Kalutskii, and V. S. Voropaev, “Features and technological parameters of asymmetric rolling of metal powders,” Visn. NTUU KPІ. Ser. Mashinobud., No. 60, 89–93 (2010).
5. V. P. Katashinskii and G. A. Vinogradov, “Investigation into the compactability of metal powders during rolling,” Powder Metall. Met. Ceram., 4, No. 5, 356–361 (1965).10.1007/BF00774613 ↗
6. G. A. Vinogradov and V. P. Katashinskii, “Study of specific pressure during the rolling of metal powders,” Powder Metall. Met. Ceram., 2, No. 3, 198–203 (1963).10.1007/BF00774273 ↗
7. K. A. Gogaev, G. Ya. Kalutskii, and V. S. Voropaev, “Asymmetric rolling of metal powders. I. Compactability of metal powders in asymmetric rolling,” Powder Metall. Met. Ceram., 48, No. 3–4, 152–156 (2009).10.1007/s11106-009-9116-9 ↗
8. V. G. Sinitsyn, Asymmetric Rolling of Sheets and Strips [in Russian], Metallurgiya, Moscow (1984).
9. A. A. Korolev, New Research into the Deformation of Metal during Rolling [in Russian], Mashgiz, Moscow (1953).
10. V. A. Nikolaev, “Contact arc length in cold rolling,” Izv. Vuz. Chern. Metall., No. 11, 57–61 (1987).
11. V. A. Nikolaev, V. L. Masur, A. K. Golubchenko, and E. V. Binkevich, Theory and Technology of Asymmetric Rolling [in Russian], Informat, Moscow (1996).
12. K. A. Gogaev, G. Ya. Kalutskii, and V. S. Voropaev, “Asymmetric rolling of metal powders. II. Angular parameters of asymmetric rolling,” Powder Metall. Met. Ceram., 48, No. 5–6, 274–278 (2009).10.1007/s11106-009-9135-6 ↗
13. V. M. Klimenko and A. M. Onishchenko, Kinematics and Dynamics of Rolling Processes [in Russian], Metallurgiya, Moscow (1984).