Fabrication of an Alumina–Copper Composite Using a Ceramic Preform
Source abstract
Abstract
In this work alumina preforms with an open porosity of 85 and 90% were produced by the replication method. The obtained preforms were used for the fabrication of Cu–Al2O3 composites. We analyzed the effect of applying pressure during a hot-pressing process on the microstructure and mechanical and thermal properties of the obtained materials. It was found that application of higher pressure (10 MPa) during sintering led to the destruction of the ceramic preforms. It facilitated filling of the remaining pores with copper, which resulted in a more homogeneous material with better mechanical and thermal properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Young-Wook Moon, Kwan-Ha Shin, and Young-Hag Koh, “Novel ceramic/camphene-based coextrusion for highly aligned porous alumina ceramic tubes,” J. Am. Ceram. Soc., No. 6, 95, 1803–1806 (2012).10.1111/j.1551-2916.2012.05210.x ↗
2. M. Montero, T. Molina, M. Szafran, et al., “Alumina porous nanomaterials obtained by colloidal processing using d-fructose as dispersant and porosity promoter,” Ceram. Int., 38, 2779–2784 (2012).10.1016/j.ceramint.2011.11.048 ↗
3. C. B. Yoon, S. H. Jun, S. M. Lee, et al., “Piezoelectric fibers with uniform internal electrode by coextrusion process,” J. Am. Ceram. Soc., No. 4, 89, 1333–6 (2006).10.1111/j.1551-2916.2005.00895.x ↗
4. L. Liu, S. Liu, and X. Tan, “Zirconia microbial hollow fiber bioreactor for Escherichia coli culture,” Ceram. Int., No. 7, 36, 2087–93 (2010).10.1016/j.ceramint.2010.04.002 ↗
5. Jong-Jin Choi, Sung-Hoon Oh, Ho-Sung Noh, et al., “Low temperature fabrication of nano-structured porous LSM–YSZ composite cathode film by aerosol deposition,” J. Alloys Compd., 509, 2627–2630 (2011).10.1016/j.jallcom.2010.11.169 ↗
6. Duanyang Li and Meishuan Li, “Preparation of porous alumina ceramic with ultra-high porosity and long straight pores by freeze casting,” J. Porous Mater., 19, 345–349 (2012).10.1007/s10934-011-9480-y ↗
7. F. Scherm, R. Völkl, A. Neubrand, et al., “Mechanical characterization of interpenetrating network metal–ceramic composites,” Mater. Sci. Eng. A, 527, 1260–1265 (2010).10.1016/j.msea.2009.09.063 ↗
8. K. Konopka and M. Szafran, “Fabrication of Al2O3–Al composites by infiltration method and their characteristic,” J. Mater. Process. Technol., 175, 266–270 (2006).10.1016/j.jmatprotec.2005.04.046 ↗
9. K. Pietrzak, K. Jach, D. Kalinski, et al., “Processing and microstructure of Al2O3–Cu composite material interpenetrating network type,” in: Proc. Euro PM 2011 Congress and Exhibition, Vol. 2, Barcelona (2011).
10. Osayande L. Ighodaro, Okenwa I. Okoli, Mei Zhang, et al., “Fabrication of metal/ceramic-reinforced composites,” Int. J. Appl. Ceram. Technol., No. 2, 9, 421–430 (2012).10.1111/j.1744-7402.2011.02675.x ↗
11. K. Pietrzak, K. Jach, D. Kalinski, et al., “Improving alumina wettability by modification of copper alloys chemical composition,” in: Proc. PM2010 World Congress and Exhibitions, Vol. 2, 361–367 (2010).
12. Tae Young Yang, Won Young Kim, Seog Young Yoon, et al., “Macroporous silicate ceramics prepared by freeze casting combined with polymer sponge method,” J. Phys. Chem. Solids, 71, 436–439 (2010).10.1016/j.jpcs.2009.10.017 ↗
13. Fei Chen, Ying Yang, Qiang Shen, et al., “Macro/microstructure dependence of mechanical strength of low temperature sintered silicon carbide ceramic foams,” Ceram. Int., 38, 5223–5229 (2012).10.1016/j.ceramint.2012.03.030 ↗
14. A. B. Sifontes, M. Urbina, and F. Fajardo, “Preparation of c-alumina ceramic foams employing hydrophilated polyester polyurethane sponges,” J. Mater. Sci., 44, 4507–4509 (2009).10.1007/s10853-009-3693-3 ↗
15. K. Jach, K. Pietrzak, D. Kalinski, et al., “Influence of binder on porous ceramic properties prepared by polymeric sponge method,” Adv. Sci. Technol., 65, 164–169 (2010).10.4028/www.scientific.net/AST.63.164 ↗