Use of Refractory Compounds in Microelectronics
Source abstract
Abstract
This article surveys the literature on the use of high-melting compounds to form thin films. The uses of these materials are classified on the basis of the following scheme: low-resistance connectors, ohmic contacts, Schottky barriers, electrooptic devices, magnetic materials, barrier layers. The set of properties and main parameters of films are discussed, and the most promising areas for the use of films of high-melting compounds in microelectronics are noted. The conditions are being created for the replacement of traditional metallic films by high-melting compounds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and interfaces · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. V. B. Bessonov, A. S. Dranenko, V. N. Ivanov, et al., “Production and properties of boride-and carbide-based films used in contact systems with gallium arsenide,” in: Use of High-Melting Film Materials and the Development of New Film Materials in Sensor Electronics [in Russian], Institute for Problems of Materials Science, National Academy of Science of Ukraine, Kiev (1994), pp. 65-68.
2. T. Ya. Kosolapova, L. A. Dvorina, and A. M. Sasov, “Use of powder metallurgy to create materials based on highmelting compounds for electronics,” Poroshk. Metall., No. 9, 34-39 (1985).
3. V. I. Bessaraba, E. M. Dudnik, and L. A. Ivanchenko, “Optical properties of thin films of hexaborides of rare-earth metals,” Poroshk. Metall., Nos. 1-3, 102-105 (1995).
4. Tahakasi Zhinoru, “Iron nitride,” Kinxoku = Metals and Technol., 63, No. 1, 55-59 (1993).
5. D. C. Sun, E. Y. Jiang, H. Liu, et al., “Fe — N gradient thin films prepared by facing targets sputtering,” J. Phys. D, 28, No. 1, 4-6 (1995).10.1088/0022-3727/28/1/002 ↗
6. V. P. Anith, A. Bhattacharya, Nitin G. Patif, et al., “Study of sputtered molybdenum nitride as a diffusion barrier,” Thin Solid Films, 236, Nos. 1-2, 306-310 (1993).10.1016/0040-6090(93)90687-K ↗
7. Y. T. Kim, C. W. Lee, and S.-K. Min, “Performance of the plasma-deposited tungsten nitride diffusion barrier for Al and Au metallization,” Jpn. J. Appl. Phys., 42, No. 128, 6126-6131 (1993).10.1143/JJAP.32.6126 ↗
8. R. Leutenecker, B. Froschle, and P. Ramm, “Titanium monophosphide (TiP) layers as diffusion barriers,” in: MAM'97 European Workshop Materials for Advanced Metallization: Abstracts, Villar-de-Lancs, France (1997), p. 124.
9. G. Sade and J. Pelleg, “Sputter deposition and characterization of TiB2/TiSi2 bilayer contact structure,” in: MAM'97 European Workshop Materials for Advanced Metallization: Abstracts, Villar-de-Lancs, France (1997), pp. 210-212.
10. John Hems, “Barrier layers: the advantages of titanium nitride,” Semicond. Int., 13, No. 12, 100-102 (1990).
11. P. Mengucci, E. D'Anna, G. Leggieri, et al., “Multilayer titanium nitride and silicide structures synthesized by multiple excimer laser irradiation,” Appl. Surf. Sci., 54, 353-357 (1992).10.1016/0169-4332(92)90070-E ↗
12. Moon Jong, Ito Toshimichi, and Ma Jing Sheng, “Formation of TiN by nitridation of magnetron sputtered Ti films using microwave plasma CVD,” J. Cryst. Growth, 115, Nos. 1-4, 589-595 (1991).10.1016/0022-0248(91)90809-J ↗