journal article·2004-01

Structure Formation in Alloys of the Cr3C2–TiN System and the Properties of Materials Based on Them

Venera G. Kayuk, Vitalii A. Maslyuk

Powder Metallurgy and Metal Ceramics· Volume 43· Issue 1-2
Publisher page

Abstract

The addition of 10-20% TiN to chromium carbide made it possible to obtain almost pore-free Cr3C2–TiN alloy specimens by hot pressing in the range from 1500 to 1850°C at a pressure of 35.7 MPa for 25 min. The 90% Cr3C2–10% TiN alloy had the maximum hardness (89 HRA) while the alloy containing 15% TiN had the maximum bending strength (480 MPa). Activation of solid-phase sintering is shown to cause a Cr3C2 solid solution to form in the titanium nitride. In alloys containing 50% or more TiN sintering is activated by the formation of a liquid phase based on the Ti–Cr–C–N eutectic.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. T. Ya. Kosolapova, T. V. Andreeva, T. S. Bartnitskaya, et al., Nonmetallic Refractories [in Russian], Metallurgiya, Moscow (1985).
2. H. Nisihara and I. Yamakami, “Development of new composite ceramic materials based on chromium carbide,” Kubota Tekko Sokeidzai Dziche Hontu, 28,No. 1, 16–18 (1987).
3. V. G. Kayuk, V. A. Maslyuk, and V. P. Smirnov, “Wear-resistant composite of the Cr3Cr2 — TiN system,” Second International Conference on Composites (Moscow, Sept. 20–22, 1994), Moscow (1994), pp. 103–104.
4. V. A. Maslyuk, “Tungsten-free chromium carbide hard alloys and experience from using press tools made of them,” in: I. D. Radomysel'skii (ed.), Powder Materials [in Russian], Institute for Problems of Materials Science, Academy of Sciences of the UkrSSR, Kiev (1983).
5. P. S. Kislyj and M. A. Kuzenkova, Sintering of Refractory Compounds [in Russian], Nauk. Dumka, Kiev (1980).
6. V. N. Eremenko, Multicomponent Titanium Alloys [in Russian], Izd. AN UkrSSR, Kiev (1962).