Nanocrystalline Powders Based on ZrO2 for Biomedical Applications and Power Engineering
Source abstract
Abstract
An 80 mass% ZrO2 ― 20 mass% Al2O3 powder was produced using a complex method which integrates sol-gel technology and hydrothermal synthesis. The specific surface areas of the powder varied from 39 to 5.3 m2/g depending on the thermal treatment conditions. Metastable F-ZrO2 formed after powder annealing at 400°C. The phase transformation F-ZrO2 → T-ZrO2 (traces of M-ZrO2) occurred under powder thermal treatment from 700 to 1000°C. Only Θ-Al2O3 was detected under experimental conditions. The powder was characterized by sintering activity. Operating the processes under powder thermal treatment in the ZrO2 ― Y2O3 ― CeO2 ― Al2O3 system will allow one to produce a variety of ceramic microstructures from fine-grained to “self-reinforced.” These powders can be used in manufacturing surgical cutting tools as well as in ceramic passive bioimplants and solid electrolytes for fuel elements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. L. L. Hench, “Bioceramics,” J. Amer. Ceram. Soc. 81 No. 7, 1705–1728 (1998).10.1111/j.1151-2916.1998.tb02540.x ↗
2. C. Piconi and G. Maccauro, “Zirconia as a ceramic biomaterial,” Biomaterials 20 1–25 (1999).10.1016/S0142-9612(98)00010-6 ↗
3. L. Gremillard, J. Chevalier, T. Epicier, and G. Fantozzi, “Improving the durability of a biomedical-grade zirconia ceramic by the addition of silica,” J. Amer. Ceram. Soc. 85 No. 2, 401–407 (2002).10.1111/j.1151-2916.2002.tb00103.x ↗
4. J. G. Duh, H. T. Dai, and B. S. Chiou “Sintering, microstructure, hardness and fracture toughness behavior of Y2O3-CeO2-ZrO2,” J. Amer. Ceram. Soc. 71 No. 10, 813–819 (1988).10.1111/j.1151-2916.1988.tb07528.x ↗
5. B. Basbide, P. Canals, and P. Odier, “Characterization of a new ternary Ce-Y-tetragonal zirconia,” J. Eur. Ceram. Soc. 5 No. 5, 289–293 (1989).10.1016/0955-2219(89)90023-X ↗
6. J-P. Lin and J-G. Dun, “Coprecipitation and hydrothermal synthesis of ultrafine 5.5 mole% CeO2 - 2 mole% YO1.5 - ZrO2 powders,” J. Amer. Ceram. Soc. 80 No. 1, 92–98 (1997).10.1111/j.1151-2916.1997.tb02795.x ↗
7. F. F. Lange, “Transformation toughening. Part 4. Fabrication, fracture toughness and strength of Al2O3 - ZrO2 composites,” J. Mat. Sci. 17 247–254 (1982).10.1007/BF00809060 ↗
8. A. V. Shevchenko, A. K. Ruban, E. V. Dudnik, and L. M. Lopato, “Production of nanocrystalline powders in the system ZrO2 - Al2O3 - Y2O3 - CeO2,” The Sixth Conference and Exhibition of the European Ceramic Society British Ceramic Proceeding, London (1999), Vol. 2, No. 60, pp. 236–237.
9. A. Weyl and D. Janke, “High-temperature ionic conduction in multicomponent solid oxide solutions based on zirconia,” J. Amer. Ceram. Soc. 80 No. 4, 861–873 (1997).10.1111/j.1151-2916.1997.tb02915.x ↗
10. W. M. Sigmund, N. S. Bell, and L. Bergström, “Novel powder processing method for advanced ceramics,” J. Amer. Ceram. Soc. 83 No. 7, 1557–1574 (2000).10.1111/j.1151-2916.2000.tb01432.x ↗
11. A. V. Shevchenko, A. K. Ruban, E. V. Dudnik, and V. A. Mel'nikova, “Hydrothermal synthesis of ultrafine zirconia powders,” Powder Metallurgy and Metal Ceramics 36 No. 7-8, 420–424 (1997).10.1007/BF02676005 ↗
12. A. V. Szevczenko, “Application of sol-gel methods for glass and ceramics processing,” in: Nowoczesne ceramicznych Warszawa (1997), pp. 163-172.
13. S. Sõmiya and T. Akiba, “Hydrothermal zirconia powders: A Bibliography,” J. Eur. Ceram. Soc.19, 81–87 (1999).10.1016/S0955-2219(98)00110-1 ↗
14. V. N. Strekalivsky, Y. M. Polezhaev, and S. F. Pal'gyev, Oxides with Impurity Disorder: Composition, Structure, Phase Transformations[in Russian], Nauka, Moscow (1987), 160 p.